Introduction
This manual provides essential information for the safe and effective use of your Amazon Basics Steel Security Safe. Please read it thoroughly before setup and operation. This 0.5-cubic-feet security safe features an electronic lock and is designed to protect your valuables such as cash, jewelry, and documents.
Image: The Amazon Basics Steel Security Safe, showcasing its electronic keypad and the interior with a shelf.
Product Features
- Electronic Lock: Equipped with an electronic keypad for secure access.
- Emergency Override Keys: Includes 2 keys for manual access in case of forgotten passcodes or dead batteries.
- Durable Construction: Made from strong alloy steel with pry-resistant concealed hinges.
- Interior Protection: Features a carpeted floor to protect contents from scratches and damage.
- Adjustable Shelf: An interior shelf can be adjusted or removed to accommodate various item sizes.
- Mounting Capability: Pre-drilled mounting holes and four expansion bolts are included for securing the safe to a wall, floor, or shelf.
- Compact Size: Exterior dimensions are approximately 13.8" W x 9.8" D x 9.8" H, with an interior of 13.6" W x 7.2" D x 9.7" H.
- Weight: Approximately 18.26 pounds.
Image: Components included with the safe, highlighting the adjustable shelf, live-door bolts, and emergency keys.
Setup
1. Battery Installation
The electronic lock requires (4) AA batteries (not included). Open the battery compartment located on the inside of the safe door and insert the batteries, ensuring correct polarity. Close the compartment securely.
2. Setting Your Passcode
- With the safe door open, press the red reset button located on the inside of the door, near the hinges.
- The yellow light on the keypad will illuminate, indicating it's ready to accept a new code.
- Enter your desired 3 to 8 digit passcode on the electronic keypad.
- Confirm your passcode by pressing the "#" button. The green light will flash, confirming the new code is set.
- Test your new passcode with the door open to ensure it works correctly before closing the safe.
3. Mounting the Safe (Optional)
For added security, the safe can be mounted to a wall, floor, or shelf using the pre-drilled holes and included expansion bolts. Choose a secure location and follow standard mounting procedures for your chosen surface.
Image: Exterior dimensions of the safe, useful for planning placement and mounting.
Operating Instructions
1. Opening the Safe with Passcode
- Enter your 3 to 8 digit passcode on the electronic keypad.
- Press the "#" button. The green light will illuminate.
- Within 5 seconds, turn the knob clockwise to open the safe door.
2. Opening the Safe with Emergency Key
In case of forgotten passcode or dead batteries, the safe can be opened using one of the two emergency override keys. Locate the keyhole cover on the electronic panel, remove it, insert the key, and turn it counter-clockwise while simultaneously turning the knob clockwise to open the door.
Important: Keep emergency keys in a secure location away from the safe.3. Closing and Locking the Safe
Close the safe door firmly. Turn the knob counter-clockwise to engage the locking bolts. The safe is now securely locked.
Image: The safe with its door open, revealing the electronic lock mechanism and interior space.
Maintenance
- Battery Replacement: Replace batteries when the red indicator light flashes or the keypad does not respond. Always use (4) new AA batteries.
- Cleaning: Wipe the exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Key Storage: Ensure emergency keys are stored in a safe, accessible location separate from the safe itself.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Safe does not open with passcode. | Incorrect passcode entered; dead batteries. | Re-enter correct passcode. Replace batteries. Use emergency key. |
| Keypad lights do not illuminate. | Dead or incorrectly installed batteries. | Check battery polarity. Replace batteries. |
| Door does not close properly. | Obstruction in door frame; bolts not fully retracted. | Clear any obstructions. Ensure knob is fully turned to retract bolts. |
Specifications
- Model: 25EI
- Exterior Dimensions (WxDxH): 13.8" x 9.8" x 9.8" (35cm x 24.9cm x 24.9cm)
- Interior Dimensions (WxDxH): 13.6" x 7.2" x 9.7" (34.5cm x 18.3cm x 24.6cm)
- Weight: Approximately 18.26 lbs (8.28 kg)
- Material: Alloy Steel
- Lock Type: Electronic Keypad with Emergency Key Override
- Power Source: 4 x AA Batteries (not included)
- Capacity: 0.5 Cubic Feet (14 Liters)
- Included Components: Safe, 2 Emergency Keys, 4 Expansion Bolts, Adjustable/Removable Shelf
Image: The interior of the safe with various items, demonstrating its storage capacity.
Warranty and Support
For warranty information and customer support, please refer to the official Amazon Basics website or contact Amazon customer service directly. You can also find additional resources in the User Manual (PDF) and Warranty (PDF) documents provided with your product.
