GasBRUH Single Tank Top Propane Radiant Heater

Introduction

This manual provides essential information for the safe and efficient operation of your GasBRUH Single Tank Top Propane Radiant Heater, Model HEATER008. Please read all instructions carefully before assembly, operation, or maintenance. Keep this manual for future reference.

Image: GasBRUH Single Tank Top Propane Radiant Heater with its USB lighter.

The GasBRUH HEATER008 is designed for outdoor use, providing portable radiant heat with three adjustable settings. It features safety mechanisms such as a tip-over switch and a safety shut-off valve. A USB windproof lighter is included for convenient ignition.

Important Safety Information

WARNING: For outdoor use only. Never operate this heater indoors or in enclosed spaces. Propane tanks are not included.

• Always ensure the heater is kept away from any flammable materials.
• Do not operate the heater unattended.
• Ensure adequate ventilation when operating.
• Keep children and pets away from the heater.
• Do not touch the heater's hot surfaces during or immediately after operation.
• Always check for gas leaks before each use.
• This heater is equipped with a tip-over switch that automatically shuts off the gas flow if the heater is accidentally knocked over.
• A safety stop valve will cut off the gas flow if the flame is extinguished.
• The brass connector between the hose and gas cylinder is designed to prevent gas leaks.
• The heater is CSA certified, ensuring it meets high safety standards.

Image: Illustration of the heater's safety features, including the tip-over switch and safety shut-off valve.

Setup

The GasBRUH HEATER008 comes largely pre-assembled. Follow these steps to prepare your heater for use:

1. Install the Anti-Scalding Safety Guard: Carefully attach the safety guard around the radiant burner element. Ensure it is securely fastened to prevent accidental contact with hot surfaces.
2. Attach Support Legs: Place the support legs vertically onto the propane cylinder. Tighten the screws until they are secure, ensuring the heater is stable on the tank.
3. Connect to Propane Tank: The heater is designed to attach to a standard 20 lb propane tank (not included). Connect the heater's gas cylinder outlet to the propane tank's valve. Hand-tighten the connection firmly to prevent leaks.
4. Leak Check: Before first use and after every tank change, perform a leak check. Apply a soapy water solution to all gas connections. If bubbles appear, there is a leak. Tighten connections or replace parts as necessary. Do not use the heater if a leak is detected.

Image: Step-by-step installation procedure for the GasBRUH heater.

Operating Instructions

Once the heater is securely set up and connected to a propane tank, follow these steps for safe operation:

1. Open Propane Tank Valve: Slowly open the valve on your propane tank counter-clockwise until fully open.
2. Release Gas: Rotate the adjustment knob on the heater to the 'LOW' setting to allow gas to flow.
3. Ignite the Burner: Press and hold the safety shut-off valve button for 10-30 seconds. While holding the button, insert the included USB windproof lighter through the ignition hole in the metal plate and activate the lighter to ignite the burner. Continue holding the safety shut-off valve button for a few more seconds after ignition to ensure the flame is stable.
4. Adjust Heat Setting: Once ignited, release the safety shut-off valve button. You can now adjust the heat output using the adjustment knob. The heater offers three settings: Low (12,000 BTU), Medium (15,000 BTU), and High (18,000 BTU).
5. Monitor Operation: Observe the heater during operation. The radiant element should glow.

A 20 lb propane cylinder can provide up to 28 hours of use, depending on the selected heat setting.

Image: The GasBRUH heater providing warmth in an outdoor patio setting.

To Turn Off the Heater:

1. Rotate the adjustment knob to the 'OFF' position.
2. Close the valve on the propane tank completely.
3. Allow the heater to cool down completely before handling or storing.

Maintenance

Regular maintenance ensures the longevity and safe operation of your heater.

• Cleaning: Ensure the heater is completely cool before cleaning. Use a soft, damp cloth to wipe down exterior surfaces. Do not use abrasive cleaners or solvents. Keep the radiant element and safety mesh clear of debris.
• Storage: When not in use, disconnect the propane tank and store the heater in a dry, protected area away from direct sunlight and extreme temperatures. Ensure the propane tank is stored outdoors in a well-ventilated area, away from ignition sources.
• Inspection: Periodically inspect the gas connections and hose for any signs of wear, damage, or leaks. Replace any damaged components immediately.

Troubleshooting

If you encounter issues with your GasBRUH HEATER008, refer to the following common troubleshooting tips:

Specifications

Warranty

For specific warranty information regarding your GasBRUH Single Tank Top Propane Radiant Heater, Model HEATER008, please consult the manufacturer's official website or contact their customer support directly. Warranty terms and conditions may vary.

Support

If you require further assistance, have questions, or need to report an issue with your GasBRUH product, please contact GasBRUH customer support.

You can also visit the official GasBRUH store for more information and product resources:

Visit the GasBRUH Store on Amazon