PHILIPS Xitanium 150W LED Electronic Driver Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of the PHILIPS Xitanium 150W LED Electronic Driver. This dimmable LED power unit is designed for use in dry and damp locations, providing reliable power for LED lighting systems.

Please read this manual thoroughly before installation and retain it for future reference.

2. Safety Information

WARNING: Risk of electric shock. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.

• Disconnect power at the circuit breaker before installing or servicing.
• Ensure proper grounding to prevent electric shock.
• Do not exceed the specified input and output voltage/current ratings.
• Do not attempt to modify or repair the driver. Refer all servicing to qualified personnel.
• Ensure the driver is installed in an environment suitable for its IP rating (Dry and Damp location).
• Keep away from flammable materials.

3. Product Overview

The PHILIPS Xitanium 150W LED Electronic Driver is a high-performance power supply for LED applications. Key features include:

• 150W 0.70A LED Driver
• Input Voltage (Vin): 120-277Vac / 250Vdc
• Output Voltage (Vout): 60-210Vdc
• Frequency: 50/60Hz
• Output Current (Iout): 0.70Adc
• Input Current (lin): 1.4 -0.6Aac / 0.67Adc
• Dimmable functionality (1-10V / DALI/Prog)

Figure 1: PHILIPS Xitanium 150W LED Electronic Driver. This image shows the top view of the LED driver with its label displaying specifications and certifications.

4. Specifications

5. Installation and Setup

5.1 Wiring Diagram

Refer to the wiring diagram below for correct electrical connections. Ensure all connections are secure and insulated.

Figure 2: Detailed wiring diagram for the PHILIPS Xitanium LED driver, showing input, output, and control connections.

Figure 3: Visual representation of the color-coded wires corresponding to the wiring diagram.

Wiring Connections:

• Input (AC Power):
  • WHT (White): Neutral (N)
  • BLK (Black): Line (L)
• Output (to LED Load):
  • BLU (Blue): LED Negative (LED-)
  • RED (Red): LED Positive (LED+)
• Control (Dimming/Programming):
  • GRY (Gray): (1-10V) Negative
  • VIO (Violet): (1-10V) Positive / DALI / Programming
  • VIO/WHT (Violet/White): DALI / Programming
• Other Connections:
  • BLU/WHT (Blue/White): Common
  • BLK/WHT (Black/White): RNTC
  • YEL (Yellow): RSET
  • HOUSING: Ground

Input and output use lead-wires. Lead-wires are 18AWG 105C/600V solid copper.

5.2 Dimensional Information

Ensure adequate space for installation and proper ventilation. Refer to the dimensions below for mounting considerations.

Figure 4: Dimensional drawing illustrating the physical measurements of the LED driver.

Figure 5: Table providing specific measurements in inches and millimeters for the LED driver's case, mounting, and overall length.

6. Operation

The PHILIPS Xitanium LED Electronic Driver is designed to provide constant current power to compatible LED modules. Once properly installed and connected to the LED load and power supply, the driver will automatically regulate the output to the LEDs.

For dimmable models, connect a compatible 1-10V dimmer or DALI control system to the GRY and VIO/VIO-WHT control wires as per the wiring diagram. Ensure the control system is correctly configured for the driver's dimming protocol.

7. Maintenance

The PHILIPS Xitanium LED Electronic Driver requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Cleaning: Periodically clean the exterior of the driver with a dry, soft cloth to remove dust and debris. Do not use liquid cleaners or solvents.
• Inspection: Regularly inspect the wiring for any signs of damage, fraying, or loose connections. Address any issues promptly.
• Ventilation: Ensure that the driver's operating environment allows for adequate airflow to prevent overheating. Do not obstruct ventilation openings.
• Environmental Conditions: Ensure the driver remains within its specified operating temperature and humidity ranges.

Do not attempt to open the driver housing, as this will void the warranty and may expose you to hazardous voltages.

8. Troubleshooting

If you experience issues with your LED driver, perform the following basic troubleshooting steps:

• No Light Output:
  • Check if the power supply to the driver is active.
  • Verify all wiring connections are secure and correct according to the diagram.
  • Ensure the LED load is compatible with the driver's output specifications (voltage and current).
  • Check the LED module for any damage or failure.
• Flickering or Unstable Light:
  • Inspect for loose wiring connections.
  • If using a dimmer, ensure it is compatible and correctly connected.
  • Verify the input voltage is stable and within the driver's specified range.
• Overheating:
  • Ensure adequate ventilation around the driver.
  • Confirm the ambient temperature is within the driver's operating limits.
  • Verify the LED load does not exceed the driver's maximum output power.

If the problem persists after performing these checks, discontinue use and contact a qualified service technician or Philips customer support.

9. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Philips customer service directly. Ensure you have your product model number (LEDINTA0700C210D0) and proof of purchase available when seeking support.

Manufacturer: Philips