Introduction
This manual provides essential information for the safe and effective use of your HQRP 10ft AC Power Cord. This power cord is designed to provide reliable power connectivity for various electronic devices, including HDTVs, LCDs, LED TVs, and Plasma TVs, specifically compatible with RCA F20706FT, F25150WN, F25151GG, F25163, F25163WN, and F25165GG models.
Image: The HQRP 10ft AC Power Cord, black, coiled, with its packaging. The packaging indicates "High Quality AC Power Cords".
Setup and Connection
The HQRP AC Power Cord features an IEC C17 type connector on one end and a NEMA 1-15P plug on the other, ensuring broad compatibility with specified devices.
- Identify the Power Input: Locate the power input port on your device (e.g., HDTV, LCD TV). This port is typically a two-pin receptacle designed for an IEC C17 connector.
- Connect to Device: Insert the IEC C17 end of the HQRP power cord firmly into the power input port of your device. Ensure a snug fit to prevent accidental disconnections.
- Connect to Power Outlet: Insert the NEMA 1-15P plug end of the power cord into a standard 120V AC wall outlet. Ensure the outlet is easily accessible and not overloaded.
- Verify Connection: Once both ends are connected, ensure the device powers on correctly. If not, recheck connections and the power outlet.
Image: A close-up view of the two ends of the power cord: the NEMA 1-15P (Type A) plug and the IEC C17 connector. An outline of the IEC C17 receptacle is shown below the connectors.
Operating Instructions
This power cord is designed for straightforward operation. Once connected as described in the "Setup and Connection" section, it provides continuous power to your compatible device.
- Ensure the power cord is not kinked, pinched, or placed under heavy objects, as this can damage the internal wiring.
- Avoid pulling the cord by the cable itself when disconnecting; always grasp the plug firmly.
- Do not use the power cord if it shows any signs of damage, such as frayed wires, exposed conductors, or damaged insulation.
Image: A detailed diagram illustrating the components of the HQRP power cord, including UL plugs, endurable bending points, SVT cord type, high quality copper, and its 10ft length.
Maintenance and Care
Proper care extends the life of your power cord and ensures safe operation.
- Cleaning: Disconnect the power cord from both the device and the wall outlet before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, coil the power cord loosely. Avoid tight coiling or bending at sharp angles, which can stress the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the entire length of the cord, including the plugs, for any signs of wear, cuts, or damage. Replace the cord immediately if any damage is observed.
Troubleshooting
If you encounter issues with your power cord, consider the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Cord not fully inserted; power outlet issue; damaged cord. | Ensure both ends of the cord are fully inserted. Test the outlet with another device. Inspect the cord for damage; replace if necessary. |
| Intermittent power. | Loose connection; internal wire damage. | Ensure connections are secure. If the problem persists, the cord may be damaged internally and should be replaced. |
| Cord feels warm. | Overload; poor connection; internal damage. | Ensure the device's power requirements do not exceed the cord's capacity (125V, 15A). Check connections. Discontinue use if cord becomes excessively hot and replace. |
Specifications
The HQRP 10ft AC Power Cord is engineered to meet specific performance and safety standards.
- Brand: HQRP
- Model Number: 887774401081517
- Length: 10 feet (approx. 3 meters)
- Wire Size: 18 AWG
- Connectors: IEC C17 Type to NEMA 1-15P
- Color: Black
- UL Listed: Yes
- Item Weight: 12 ounces
- Compatibility: RCA F20706FT, F25150WN, F25151GG, F25163, F25163WN, F25165GG HDTV TV LCD LED Plasma
Image: An infographic highlighting key specifications: 15 Amp, 125 Volt, 18 AWG, UL Listed, and 10 ft length.
Warranty Information
This HQRP AC Power Cord comes with a 200-day warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For warranty service or inquiries, please contact HQRP customer support through their official channels.
Support and Contact
For further assistance, technical support, or product information, please visit the official HQRP website or contact their customer service department.
Manufacturer: HQRP
For more information, you may visit the HQRP Store on Amazon.
Safety Information
Important Safety Precautions:
- Do not expose the power cord to water or excessive moisture.
- Do not use the power cord outdoors or in wet conditions.
- Ensure the power cord is not a tripping hazard.
- Do not attempt to modify or repair the power cord. Refer to qualified personnel for any issues.
- Keep out of reach of children and pets.
Legal Disclaimer:
This is not an Original Equipment Manufacturer (OEM) product, HQRP branded product is a replacement. All brand names and logos are registered trademarks of their respective owners. Any use of the brand names or model designations for this product are made solely for purposes of demonstrating compatibility.