Canon PowerShot SX610 HS Digital Camera Instruction Manual

1. Introduction and Overview

The Canon PowerShot SX610 HS is a compact digital camera designed for versatility and ease of use. It features an 18x Optical Zoom lens, allowing for a wide range of photographic opportunities from wide-angle landscapes to distant subjects. The camera is equipped with a 20.2 Megapixel High-Sensitivity CMOS sensor and a DIGIC 4+ Image Processor, which together form the Canon HS SYSTEM, ensuring high-quality images even in low-light conditions. Built-in Wi-Fi and NFC capabilities enable seamless sharing of photos and videos to compatible mobile devices and social media platforms, as well as remote shooting functionality.

Figure 1.1: Front view of the Canon PowerShot SX610 HS Digital Camera. This image displays the camera's compact design, the Canon branding, the 18x optical zoom lens, and the pop-up flash unit.

2. What's in the Box

Upon opening your Canon PowerShot SX610 HS package, please ensure all the following items are present:

• PowerShot SX610 HS Digital Camera
• Battery Pack NB-6LH
• Battery Charger CB-2LY
• Wrist Strap WS-800
• One Year Limited Warranty Card

3. Setup

3.1. Installing the Battery Pack

1. Open the battery compartment cover located on the bottom of the camera.
2. Insert the Battery Pack NB-6LH, ensuring the contacts align correctly. Push the battery until it clicks into place.
3. Close the battery compartment cover securely.

3.2. Charging the Battery

Use the provided Battery Charger CB-2LY to charge the Battery Pack NB-6LH. Connect the charger to a power outlet and insert the battery. The charging indicator light will show the charging status.

3.3. Inserting a Memory Card

The camera uses Micro SD memory cards (up to 1 TB supported). Open the memory card slot cover, insert the Micro SD card with the contacts facing down until it clicks, and then close the cover.

3.4. Initial Power On and Date/Time Settings

Press the ON/OFF button to power on the camera. The first time you power on, you may be prompted to set the date, time, and time zone. Follow the on-screen instructions using the directional buttons and FUNC./SET button.

4. Operating the Camera

4.1. Basic Shooting

To take a photo:

1. Turn on the camera by pressing the ON/OFF button.
2. Point the camera at your subject. The camera will automatically focus.
3. Press the shutter button halfway down to focus, then press it fully to capture the image.

Figure 4.1: Rear view of the Canon PowerShot SX610 HS Digital Camera. This image shows the 3.0-inch LCD screen, directional buttons, FUNC./SET button, and other controls for navigation and settings.

4.2. Using the Optical Zoom

The camera features an 18x optical zoom lens (25-450mm equivalent). Use the zoom lever around the shutter button to zoom in (telephoto) or zoom out (wide-angle). The Intelligent IS system helps to minimize blur from camera shake, especially at longer zoom settings.

Figure 4.2: Top view of the Canon PowerShot SX610 HS Digital Camera. This image highlights the ON/OFF button, shutter button with zoom lever, and mode dial.

4.3. Flash Modes

The camera has a built-in flash. To activate the flash, slide the flash switch to pop it up. You can select various flash modes (Auto, On, Slow Synchro, Off) through the camera's menu or dedicated flash button, depending on the shooting mode.

4.4. Recording Videos

To record Full HD (1080p) video:

1. Press the dedicated movie button (usually marked with a red dot) to start recording.
2. Press the movie button again to stop recording.

4.5. Wi-Fi and NFC Connectivity

The Canon PowerShot SX610 HS includes built-in Wi-Fi and NFC for wireless communication. Use these features to:

• Transfer images and videos to compatible smartphones, tablets, or computers using the Canon Camera Connect app.
• Share directly to select social networking sites.
• Shoot remotely from your smartphone or tablet.

Refer to the camera's on-screen Wi-Fi menu for detailed instructions on connecting to devices and networks.

5. Maintenance

5.1. Cleaning the Camera

• Camera Body: Use a soft, dry cloth to wipe the camera body. For stubborn dirt, lightly dampen the cloth with water.
• Lens: Use a lens blower to remove dust, then gently wipe with a lens cleaning cloth. Avoid touching the lens surface with your fingers.
• LCD Screen: Wipe gently with a soft cloth. Avoid pressing hard on the screen.

5.2. Storage

When not in use, store the camera in a cool, dry, well-ventilated area away from direct sunlight, high temperatures, and humidity. Remove the battery if the camera will not be used for an extended period.

6. Troubleshooting

6.1. Camera Does Not Turn On

• Ensure the battery is fully charged and correctly inserted.
• Check if the battery contacts are clean.

6.2. Images Are Blurry

• Check if the lens is clean and free from smudges.
• Ensure the camera has properly focused on the subject.
• Use a faster shutter speed or enable image stabilization in low-light conditions.

6.3. Wi-Fi Connection Fails

• Ensure the Canon Camera Connect app is installed and updated on your mobile device.
• Verify that Wi-Fi is enabled on both the camera and the connecting device.
• Check network settings and passwords.

6.4. Memory Card Error

• Ensure the memory card is inserted correctly.
• Try formatting the memory card (note: this will erase all data).
• Test with a different, compatible memory card.

7. Specifications

8. Warranty and Support

8.1. Warranty Information

Your Canon PowerShot SX610 HS Digital Camera comes with a One Year Limited Warranty. Please refer to the included warranty card for specific terms, conditions, and registration details.

8.2. Customer Support

For further assistance, technical support, or service inquiries, please visit the official Canon support website or contact their customer service. You can find contact information and resources on the Canon website: www.usa.canon.com/support