Vexilar FL-8SE 19 Ice-Ducer Fish Finder Instruction Manual

Product Overview

The Vexilar FL-8SE 19 Ice-Ducer Fish Finder is a battery-powered, surface-mount sonar system designed for ice fishing. It features an LED display and is engineered to help users locate fish and underwater structures in depths up to 120 feet.

Image: The Vexilar FL-8SE 19 Ice-Ducer Fish Finder, showing the main display unit, transducer, and battery components.

Key features include:

• Vexilar FL-8SE GENZ Pack with 19 Ice Ducer [GP0819]
• Battery Powered operation for portability.
• LED Display for clear visibility.
• Designed for ice fishing applications.

Setup Instructions

1. Unpack Components: Carefully remove the FL-8SE display unit, 19 Ice-Ducer transducer, battery, and all cables from the packaging.
2. Battery Connection: Connect the power cables from the display unit to the battery terminals. Ensure correct polarity (red to positive, black to negative).
3. Transducer Connection: Plug the transducer cable into the designated port on the FL-8SE display unit.
4. Mounting the Transducer:
   • For ice fishing, position the 19 Ice-Ducer transducer into the ice hole.
   • Adjust the depth of the transducer so it is submerged just below the ice, ensuring it hangs freely and is not obstructed.
5. Positioning the Display Unit: Place the FL-8SE display unit on a stable, flat surface near the ice hole for easy viewing.

Operating Instructions

1. Power On: Turn the unit on using the power switch, typically located on the display unit. The LED display should illuminate.
2. Adjust Gain: Use the GAIN control knob to adjust the sensitivity. Start with a lower setting and gradually increase it until you see a clear bottom reading and fish targets without excessive clutter.
3. Select Range: Choose the appropriate depth range (e.g., 10, 20, 30, 40, 50 feet) using the RANGE selector. Select a range slightly greater than the current water depth.
4. Interpret Display:
   • The FL-8SE uses a circular LED display. The outer edge represents the surface, and the center represents the maximum selected depth.
   • Solid red or orange bands typically indicate a strong return (e.g., bottom, large fish).
   • Green or yellow bands indicate weaker returns (e.g., smaller fish, baitfish, weeds).
   • Watch for flashing lights or changes in color patterns to identify fish and their movement.
5. Interference Rejection: If experiencing interference from other sonar units, adjust the Interference Rejection (IR) setting. Cycle through the available settings (e.g., 1-5) to find the clearest display.
6. Power Off: When finished, turn off the unit using the power switch.

Maintenance

• Battery Care:
  • Fully charge the battery after each use to prolong its lifespan.
  • Store the battery in a cool, dry place when not in use.
  • Avoid completely draining the battery, as this can reduce its overall capacity.
• Cleaning:
  • Wipe down the display unit and transducer with a soft, damp cloth after each use.
  • Ensure the transducer is free of ice buildup or debris before and after use.
  • Do not use abrasive cleaners or solvents on any part of the unit.
• Storage: Store the fish finder in its carrying case in a dry, temperature-controlled environment.

Troubleshooting

• No Power:
  • Check battery connections to ensure they are secure and correctly polarized.
  • Verify the battery is fully charged.
  • Inspect the power cable for any damage.
• No Display/Weak Signal:
  • Ensure the transducer is fully submerged and free of ice or air bubbles.
  • Adjust the GAIN setting to increase sensitivity.
  • Check the transducer cable connection to the display unit.
  • Verify the correct depth range is selected.
• Excessive Interference:
  • Adjust the Interference Rejection (IR) setting.
  • Move the transducer or the entire unit to a different location if possible, especially if fishing near other sonar devices.

Specifications

Warranty and Support

For detailed warranty information and customer support, please refer to the documentation included with your product or visit the official Vexilar website. Specific warranty terms may vary by region and purchase date.