Introduction
This manual provides detailed instructions for the safe and efficient use of your Lloyd Curvella LS13A3P Split Air Conditioner. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Image: The indoor unit of the Lloyd Curvella LS13A3P Split AC.
Safety Information
Always follow basic safety precautions to reduce the risk of fire, electric shock, or injury.
- Ensure the power supply matches the unit's specifications.
- Do not operate the AC with wet hands.
- Keep children away from the unit.
- Do not insert objects into the air outlet.
- For installation and maintenance, always contact qualified service personnel.
Package Contents
Upon unpacking, verify that all components are present:
- 1 main unit (Indoor and Outdoor units)
- 1 Remote Control
- Warranty card
- User Manual (this document)
Setup and Installation
The Lloyd Curvella LS13A3P is a Split System Air Conditioner. Professional installation is highly recommended to ensure proper functioning and safety.
Pre-Installation Checks:
- Ensure the installation location can support the weight of both indoor and outdoor units.
- Verify adequate space for air circulation around both units.
- Confirm proper drainage for the indoor unit.
Installation Steps (Summary - Professional Installation Recommended):
- Mount the indoor unit securely on the wall.
- Install the outdoor unit on a stable, level surface, ensuring proper clearance.
- Connect refrigerant piping between the indoor and outdoor units.
- Connect electrical wiring according to the wiring diagram provided with the unit.
- Perform vacuuming and refrigerant charging.
- Test the unit for proper operation.
For detailed installation instructions, refer to the separate installation guide provided to certified technicians or contact Lloyd support directly on Punjab, Himachal Pradesh: 1800-1377-781.
Operating Instructions
Your Lloyd Curvella LS13A3P AC is controlled via a remote control.
Remote Control Functions:
- Power Button: Turns the unit ON/OFF.
- Mode Button: Cycles through modes: Cool, Fan, Dry.
- Temperature Up/Down: Adjusts the desired temperature.
- Fan Speed Button: Selects fan speed (Low, Medium, High, Auto).
- Swing Button: Controls the louver swing for air direction.
- Timer Button: Sets ON/OFF timers.
Basic Operation:
- Press the Power button to turn on the AC.
- Select the desired mode using the Mode button. For cooling, select "Cool".
- Adjust the temperature using the Temperature Up/Down buttons. Recommended cooling temperature is typically between 24°C and 26°C.
- Adjust fan speed as desired.
The unit features an Anti Bacterial Filter for improved air quality.
Maintenance
Regular maintenance ensures optimal performance and longevity of your AC unit.
Air Filter Cleaning:
- Frequency: Clean every two weeks or more often if used frequently.
- Steps:
- Turn off the AC and disconnect power.
- Open the front panel of the indoor unit.
- Remove the air filters.
- Wash filters with lukewarm water and mild detergent.
- Rinse thoroughly and allow to air dry completely before re-installing.
- Close the front panel.
Outdoor Unit Maintenance:
- Keep the area around the outdoor unit clear of obstructions, debris, and vegetation.
- Periodically clean the outdoor coil fins with a soft brush or vacuum cleaner.
- For thorough cleaning and inspection, schedule professional servicing annually.
Important: Always disconnect power before performing any maintenance.
Troubleshooting
Before contacting service, check the following common issues:
| Problem | Possible Cause | Solution |
|---|---|---|
| AC does not turn on | No power supply; Remote control batteries dead. | Check circuit breaker; Replace remote control batteries. |
| Insufficient cooling | Dirty air filters; Blocked outdoor unit; Doors/windows open; Temperature setting too high. | Clean air filters; Clear obstructions; Close openings; Lower temperature setting. |
| Unusual noise | Loose parts; Unit not level; Foreign object. | Contact service if noise persists after checking for obvious obstructions. |
| Water leakage from indoor unit | Blocked drain pipe; Improper installation. | Contact professional service for inspection and repair. |
If the problem persists after attempting these solutions, please contact Lloyd customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Lloyd |
| Model Name | LS13A3P |
| Type | Split System, Non Inverter |
| Capacity | 1 Ton |
| Energy Rating | 1 Star Rating (BEE Star Rating: 1 Star) |
| Cooling Power | 3400 Watts |
| Wattage | 1162 Watts |
| Noise Level | 41 Decibels |
| Special Feature | Anti Bacterial Filter |
| Colour | White |
| Core Material | Copper |
| Voltage | 230 Volts |
| Floor Area Coverage | 110 Square Feet |
| Controller Type | Remote Control |
Warranty and Support
Your Lloyd Curvella LS13A3P Split AC comes with the following warranty:
- Product Warranty: 1 year comprehensive warranty.
- Compressor Warranty: 4 years on the compressor.
For warranty claims, installation requests, or technical support, please contact Lloyd customer service.
Lloyd Support Contact:
Punjab, Himachal Pradesh: 1800-1377-781
Please have your model number (LS13A3P) and purchase details ready when contacting support.