1. Introduction
This manual provides essential information for the safe and efficient operation of your Sunbeam Hair Dryer with Night Light, Model 1632-040. Designed for convenience and energy efficiency, this wall-mounted hair dryer features dual wattage settings, tourmaline technology, and a magnetic hand set locking system. Please read these instructions thoroughly before initial use and retain them for future reference.
2. Important Safety Information
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons.
- Read all instructions before using this appliance.
- Do not use near water. Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.
- Always unplug this appliance immediately after using.
- Do not reach for an appliance that has fallen into water. Unplug immediately.
- This appliance is for household use only.
- Close supervision is necessary when this appliance is used by, on, or near children or invalids.
- Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water.
- Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
- Never use while sleeping.
- Never drop or insert any object into any opening.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not direct hot air towards eyes or other heat-sensitive areas.
- The appliance is hot when in use. Do not let eyes or bare skin touch heated surfaces.
- Do not place the appliance directly on any surface while it is operating or immediately after use.
3. Package Contents
- Sunbeam Hair Dryer Unit
- Wall Mounting Base with integrated Night Light
- Mounting Bracket and Installation Hardware (screws, anchors)
- Instruction Manual (this document)
4. Setup and Installation
The Sunbeam Hair Dryer is designed for convenient wall-mounted installation. Ensure you have adequate space for the unit, considering its dimensions and the reach of the coiled cord.
- Choose Location: Select a suitable wall location near an electrical outlet, ensuring it is not directly above a water source. Consider the unit's projection from the wall (approximately 5 inches depth) to avoid obstructing cabinet doors or other fixtures.
- Mounting Bracket: Secure the provided mounting bracket to the wall using the included screws and anchors. For optimal stability, it is recommended to mount into a wall stud if possible.
- Attach Base Unit: Once the bracket is securely installed, align the wall mounting base with the bracket and slide it into place until it clicks securely.
- Cord Management: The unit features internal cord storage within the wall-mounted base. Feed any excess power cord into this compartment to keep the installation neat and free of dangling wires.
- Plug In: Plug the power cord into a suitable electrical outlet.
Image: Side view of the Sunbeam Hair Dryer, illustrating the wall-mounted base and the detachable dryer unit. Note the night light at the bottom of the base.
Image: Dimensional diagram of the Sunbeam Hair Dryer, indicating its approximate height of 19 inches (48 cm) when mounted, providing a visual reference for installation planning.
5. Operating Instructions
Your Sunbeam Hair Dryer offers versatile settings for optimal drying performance.
5.1. Powering On/Off
- To turn on the hair dryer, simply lift the dryer unit from its wall-mounted base. The dryer will automatically activate.
- To turn off the hair dryer, return the dryer unit to its wall-mounted base. The magnetic locking system will secure it, and the dryer will automatically deactivate.
5.2. Wattage Selection (1200W / 1500W)
The hair dryer features a dual wattage switch located under the removable screen covering the back of the fan. This allows you to select between 1200 watts for energy savings or 1500 watts for higher power output.
- Ensure the unit is unplugged before adjusting the wattage.
- Carefully remove the rear screen/cover of the dryer unit.
- Locate the wattage selector switch and move it to your desired setting (1200W or 1500W).
- Replace the rear screen/cover securely.
5.3. Air Speed and Heat Settings
The dryer unit features two air speed and heat settings, allowing you to customize your drying experience. These controls are typically located on the handle of the dryer.
- Slide the switch to the desired setting:
- Low: For gentle drying and styling.
- High: For fast drying.
5.4. Night Light Function
The wall-mounted base includes an integrated night light. This light provides a soft illumination, ideal for low-light conditions. The night light typically operates independently of the hair dryer's power and may have its own dedicated on/off switch on the base.
Image: The Sunbeam Hair Dryer and its wall-mounted base, showcasing the overall product design and the coiled power cord.
Image: Top-down view of the Sunbeam Hair Dryer, providing a clear perspective of the dryer unit's head and its integration with the wall-mounted base.
6. Maintenance and Care
Proper maintenance ensures the longevity and optimal performance of your hair dryer.
- Cleaning: Regularly clean the air intake filter located at the back of the dryer unit. Dust and lint buildup can reduce airflow and cause overheating. Ensure the dryer is unplugged and cool before cleaning. Use a soft brush or vacuum cleaner to remove debris.
- Exterior Cleaning: Wipe the exterior of the dryer and the wall-mounted base with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, always return the dryer unit to its wall-mounted base. This protects the unit and keeps the cord neatly stored.
7. Troubleshooting
If you encounter issues with your Sunbeam Hair Dryer, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer does not turn on. | Not properly seated in base; Power cord unplugged; No power at outlet. | Ensure dryer is fully seated in the magnetic locking system. Check if the power cord is securely plugged into a working outlet. Test the outlet with another appliance. |
| Weak airflow or overheating. | Blocked air intake filter; Internal fan obstruction. | Unplug the dryer and clean the air intake filter at the back of the unit. Ensure no lint or hair is blocking the vents. If the problem persists, discontinue use and contact customer support. |
| Unusual noise (e.g., high-pitched motor noise). | Motor or fan bearing issue. | This may indicate an internal component issue. Discontinue use and contact customer support for assistance. |
| Night light not working. | Night light switch off; Electrical issue. | Check the dedicated night light switch on the wall-mounted base. Ensure the unit is receiving power. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Sunbeam |
| Model Number | 1632-040 |
| Product Dimensions | 11.5 x 5 x 5.4 inches (Height x Width x Depth) |
| Item Weight | 1.87 pounds |
| Wattage | Dual Wattage: 1200 watts / 1500 watts |
| Power Source | Corded Electric |
| Color | White |
| Material | Plastic |
| Features | Magnetic Hand Set Locking System, Tourmaline Technology, Two Air Speed and Heat Settings, Integrated Night Light |
9. Warranty and Support
For warranty information or technical support, please contact Sunbeam Customer Service. Keep your purchase receipt as proof of purchase for any warranty claims.
You can find contact details for Sunbeam support on their official website or through the retailer where you purchased the product.
Note: Specific warranty terms may vary by region and retailer.
