KONCEPT ELX-A-W-CRM-FLR Equo LED Floor Lamp User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient use of your KONCEPT ELX-A-W-CRM-FLR Equo LED Floor Lamp. Please read this manual thoroughly before assembly, operation, or maintenance. Keep this manual for future reference.

2. Safety Instructions

Observe the following safety precautions to prevent injury or damage to the lamp:

• Ensure the lamp is placed on a stable, level surface to prevent tipping.
• Do not expose the lamp to moisture or extreme temperatures. This product is not waterproof.
• Use only with the specified voltage (100 Volts).
• Do not attempt to modify or repair the lamp. Refer all servicing to qualified personnel.
• Keep the power cord away from heat sources, sharp edges, and moving parts.
• Unplug the lamp from the power outlet before cleaning or performing any maintenance.
• The LED light source is integrated and not user-replaceable.

3. Package Contents

Verify that all components are present before assembly:

• Equo LED Floor Lamp (Base, Pole, Light Head Assembly)
• Power Cord
• User Manual (This document)

4. Setup and Assembly

Assembly is required for this floor lamp. Follow these steps:

1. Carefully unpack all components from the packaging.
2. Place the lamp base on a flat, stable surface.
3. Attach the main pole to the lamp base. Ensure it is securely fastened.
4. Connect the light head assembly to the top of the main pole.
5. Route the power cord as instructed by the manufacturer, ensuring it is not pinched or strained.
6. Plug the power cord into a standard 100V electrical outlet.

5. Operating Instructions

The Equo LED Floor Lamp features touch control for power and dimming.

• Power On/Off: Gently touch the designated touch sensor on the lamp to turn the light on or off.
• Dimming: To adjust brightness, press and hold the touch sensor. The light will cycle through its dimming levels. Release the sensor when the desired brightness is reached.
• Adjusting the Light Head: The light head is mounted on a counterbalanced arm. You can move the LED light head up and down to direct the light as desired. Handle with care to avoid damage.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your lamp.

• Cleaning: Before cleaning, unplug the lamp from the power outlet. Use a soft, dry cloth to wipe down the lamp's surfaces. Do not use abrasive cleaners, solvents, or polishes, as these may damage the finish.
• LED Light Source: The LED light source is integrated and designed for long-term use. It is not user-replaceable. If the LED light fails, contact customer support.
• Cord Care: Periodically inspect the power cord for any signs of damage. If the cord is damaged, discontinue use and contact customer support.

7. Troubleshooting

If you encounter issues with your lamp, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact KONCEPT customer support.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please contact KONCEPT customer service. Keep your purchase receipt as proof of purchase.

Manufacturer: KONCEPT

Model: ELX-A-W-CRM-FLR

Please refer to the official KONCEPT website or your purchase documentation for the most current warranty terms and contact information.