1. Introduction
This manual provides essential instructions for the setup, operation, and maintenance of your Ajanta Quartz OLC-302 Digital Red LED Square Wall Clock. Please read this guide thoroughly before using the product to ensure proper function and longevity.
2. Product Overview
The Ajanta Quartz OLC-302 is a modern digital wall clock designed for clear timekeeping and aesthetic appeal. It features a bright red LED display, showing time, date, day of the week, and temperature. Its square design and black finish complement various indoor settings.
Image 2.1: Front view of the Ajanta Quartz OLC-302 Digital Red LED Square Wall Clock.
Key Features:
- Bright Red LED Display for clear visibility.
- Displays Hour, Minute, Second, Date, Month, Year, Day of the Week, and Temperature.
- Operates with an electric connection.
- Includes 2 AA batteries for time retention during power outages.
- Durable plastic construction with a classic black finish.
3. Setup
Follow these steps to set up your Ajanta Quartz OLC-302 Digital Wall Clock:
- Unpacking: Carefully remove the clock from its packaging. Inspect for any damage.
- Battery Installation: Locate the battery compartment on the back of the clock. Insert the two included AA batteries, ensuring correct polarity (+/-). These batteries serve as a backup to maintain time settings during power interruptions.
- Power Connection: Connect the power cord to the clock and then plug it into a standard electrical outlet. The clock will power on and display the current time and date.
Image 3.1: Rear view of the clock with power cord and battery compartment.
- Mounting: The clock is designed for wall mounting. Use appropriate hardware (not included) to securely hang the clock in your desired location. Ensure the power cord can reach an outlet without strain.
4. Operation
The Ajanta Quartz OLC-302 clock automatically displays the time, date, day of the week, and temperature once powered on. No manual setting is typically required for basic timekeeping, as it synchronizes with the power source.
Display Information:
- Top Row: Displays DATE, MONTH, YEAR.
- Middle Row: Displays HOUR, MINUTE, SECOND.
- Bottom Left: Displays TEMP (Temperature in Celsius).
- Bottom Middle: Displays the current day of the week (SUN, MON, TUE, WED, THU, FRI, SAT).
- Bottom Right: AM/PM indicator.
For any specific time or date adjustments, refer to the small buttons located on the side or back of the unit. These buttons typically allow for setting the time, date, and switching between 12-hour and 24-hour formats. Consult the physical product for exact button locations and functions, as they may vary slightly.
5. Maintenance
To ensure your clock remains in optimal condition:
- Cleaning: Wipe the clock surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the display or casing.
- Power Backup: Replace the AA backup batteries annually or when you notice the time resetting after a power outage, even if the clock is plugged in.
- Placement: Avoid placing the clock in direct sunlight or near extreme heat sources, which can affect the display's longevity and temperature sensor accuracy.
6. Troubleshooting
If you encounter issues with your clock, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or not lighting up. | No power supply or loose connection. | Ensure the power cord is securely plugged into both the clock and a working electrical outlet. Check the outlet with another device. |
| Time is incorrect after a power outage. | Backup batteries are depleted or not installed. | Replace the 2 AA backup batteries with new ones, ensuring correct polarity. |
| One or more display segments are not lighting up. | Internal component failure. | This may indicate a manufacturing defect. Contact customer support for assistance. |
| Temperature reading appears inaccurate. | Clock placed near a heat source or in direct sunlight. | Relocate the clock to an area with stable ambient temperature, away from direct heat or cold sources. |
7. Specifications
Detailed specifications for the Ajanta Quartz OLC-302 Digital Wall Clock:
Image 7.1: Dimensions of the Ajanta Quartz OLC-302 Digital Wall Clock.
| Feature | Detail |
|---|---|
| Brand | Ajanta Quartz |
| Model Number | OLC-302 |
| Display Type | Digital (Red LED) |
| Color | Black |
| Material | Plastic |
| Shape | Square |
| Product Dimensions | 28.2W x 26.4H Centimeters |
| Power Source | Corded Electric |
| Backup Batteries | 2 AA batteries (included) |
| Mounting Type | Wall Mount |
| Item Weight | 850 Grams |
| Country of Origin | India |
| GTIN (UPC) | 08901599101203 |
| What is in the box? | One Wall Clock with 2 AA Batteries |
8. Warranty and Support
For warranty information or customer support, please contact Ajanta Quartz directly. The manufacturer details are provided below:
- Manufacturer: Ajanta Mfg. Pvt. Ltd. (OREVA Group)
- Address: 8-A National Highway, Nr. Surajbari Bridge, Samkhiyali - 370150, Gujarat, India
- Customer Care No.: 18001204445
- Email: info@oreva.com
Please retain your purchase receipt for warranty claims.