Groomers Helper® Tether Repair Kit Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the installation and maintenance of your Groomers Helper® Tether Repair Kit. This kit is designed to replace worn or damaged tethers on your Groomers Helper Professional and Starter Sets, ensuring continued safe and effective pet grooming. Please read all instructions carefully before proceeding.

2. Product Overview

The Groomers Helper® Tether Repair Kit provides a replacement tether and the necessary tool for its installation. It is compatible with both the Groomers Helper Professional and Starter Set systems. The tether is a crucial component for safely securing pets during grooming sessions.

Image: The Groomers Helper Tether Repair Kit, including a purple replacement tether and an Allen wrench.

3. Package Contents

The Groomers Helper® Tether Repair Kit includes:

• 1 x Replacement Tether (Purple)
• 1 x Allen Wrench (correct size for installation)

4. Installation Instructions

Follow these steps to replace the tether on your Groomers Helper clamp:

1. Remove Hex Bolts: Use the included Allen wrench to remove the hex bolts that secure the old tether in place on the Groomers Helper clamp.
2. Remove Old Tether: Carefully pull out and remove the old or damaged tether from the clamp.
3. Insert New Tether: Insert the new tether into the side hole of the clamp first. Then, pull the tether through the main clamp body and string it through the clip.
4. Secure New Tether: Insert the end of the new tether into the hole located above where the bolts will be. Tighten the hex bolts with the Allen wrench to securely fasten the new tether.

Image: Step-by-step visual guide for replacing the tether on a Groomers Helper clamp.

Video Guide: Tether Replacement

5. Product Use

Once the new tether is securely installed, attach the Groomers Helper clamp to your grooming table. Connect the tether's clip to the pet's collar or harness. Ensure the tether is adjusted to a comfortable and secure length, allowing the pet to stand or sit without excessive movement, but preventing them from jumping off the table. Always supervise pets during grooming.

Image: A small dog safely secured on a grooming table using the Groomers Helper tether system.

6. Care and Maintenance

To prolong the life of your Groomers Helper tether:

• Regularly inspect the tether for signs of wear, fraying, or damage.
• Clean the tether with a damp cloth and mild soap as needed. Avoid harsh chemicals.
• Store the tether in a dry place when not in use.
• Ensure pets do not chew on the tether, as this can compromise its integrity.

7. Troubleshooting

If the tether becomes damaged again, or if you experience difficulty with the installation:

• Tether Damage: If the tether shows signs of significant wear or is chewed through, it is recommended to replace it immediately with a new Groomers Helper Tether Repair Kit to maintain safety.
• Installation Difficulty: Review the installation steps and video guide carefully. Ensure the hex bolts are fully tightened to secure the tether. If issues persist, contact Groomers Helper customer support.

8. Specifications

9. Support Information

For further assistance, questions, or to purchase additional replacement parts, please visit the official Groomers Helper website or contact their customer support directly. Information regarding returns is typically available for 30 days from the date of purchase.

Manufacturer: Groomers Helper

Website: Visit the Groomers Helper Store on Amazon