Photographic Solutions Eclipse Optic Cleaning Fluid

1. Product Overview

The Photographic Solutions Eclipse Optic Cleaning Fluid is a high-purity cleaning solution designed for critical optical surfaces. It effectively removes dust, dirt, oil, and debris without leaving streaks or residue. This 0.5 fl. oz. (15ml) bottle features a dropper tip for controlled application.

Image 1.1: Eclipse Optic Cleaning Fluid highlighting its quick-drying, streak-free, and residue-free properties.

Eclipse is suitable for cleaning various optical equipment, including camera sensors (CCD and CMOS), lenses, binoculars, telescopes, and projectors. It is recommended for use in conjunction with Photographic Solutions PEC*PAD non-abrasive wipes for lenses and Sensor Swabs for camera sensors.

2. Safety Information and Precautions

• Flammability: Eclipse Optic Cleaning Fluid is flammable. Keep away from open flames, sparks, and heat sources.
• Ventilation: Use in a well-ventilated area.
• Skin and Eye Contact: Avoid prolonged skin contact. In case of eye contact, flush thoroughly with water and seek medical attention if irritation persists.
• Ingestion: Do not ingest. If swallowed, seek immediate medical attention.
• Plastic Surfaces: CAUTION: Do not apply Eclipse Optic Cleaning Fluid to any plastic elements of a lens, filter, or viewfinder. This product is not recommended for plastic optics as it may cause damage.
• Storage: Store in a cool, dry place, away from direct sunlight. Once opened, the product may attract moisture; it is best used within a reasonable timeframe after opening.
• Children and Pets: Keep out of reach of children and pets.

3. What's in the Box

• One 0.5 fl. oz. (15ml) bottle of Eclipse Optic Cleaning Fluid with dropper tip.

4. Operating Instructions

Eclipse Optic Cleaning Fluid is designed for precise application. Always use with appropriate cleaning accessories such as Sensor Swabs for camera sensors or PEC*PAD non-abrasive wipes for lenses and other optical glass surfaces.

4.1. Cleaning Camera Sensors (CCD/CMOS)

For cleaning camera sensors, use Eclipse fluid with Photographic Solutions Sensor Swabs. Ensure you are in a clean, dust-free environment.

Image 4.1: Visual guide for sensor cleaning using Eclipse and Sensor Swab ULTRA.

1. Prepare: Remove the lens from your camera to expose the sensor. Ensure the camera battery is fully charged to prevent the shutter from closing during cleaning.
2. Initial Dust Removal: Safely blow off any loose dust or dirt from the sensor using a clean, dust-free air blower (e.g., Orbit HEPA Blower). Do not use canned air, as it can leave residue.
3. Apply Fluid: Dispense 2-3 drops of Eclipse Optic Cleaning Fluid onto one side of a clean Sensor Swab. Ensure the swab tip is adequately moistened but not saturated.
4. First Pass: Gently drag the moistened side of the swab across the sensor surface in one continuous motion, from one end to the other. Apply even, light pressure.
5. Second Pass: Flip the swab to its clean, unused side. Drag this side across the sensor in the opposite direction, again with a single, continuous motion.
6. Discard: Immediately discard the used swab. Do not reuse swabs.
7. Inspect: Re-attach a lens, take a test shot of a plain, bright surface (like a white wall or clear sky) at a small aperture (e.g., f/22), and inspect the image for any remaining dust or streaks.
8. Repeat (if necessary): If dust or streaks remain, repeat steps 3-6 using a new Sensor Swab.

4.2. Cleaning Lenses and Other Optical Glass Surfaces

For cleaning lenses, filters, and other optical glass surfaces, use Eclipse fluid with PEC*PAD non-abrasive wipes. This method helps prevent hazy swirls.

Image 4.2: Visual guide for lens cleaning using Eclipse and PEC*PAD non-abrasive wipes.

1. Initial Dust Removal: Use a clean, dust-free air blower to remove any loose dust or grit from the optical surface. This prevents scratching during wiping.
2. Prepare Wipe: Fold a PEC*PAD non-abrasive wipe into a convenient size.
3. Apply Fluid: Dispense several drops of Eclipse Optic Cleaning Fluid onto a corner or edge of the folded PEC*PAD.
4. Clean Surface: Gently wipe the optical surface in a single, continuous direction, starting from the center and moving towards the outer edge.
5. "Drag Off" Technique: As you reach the edge of the lens, gently lift and "drag off" the wipe from the surface. This helps to remove any lifted contaminants.
6. Minimize Contact: Handle the PEC*PAD as little as possible to minimize the transfer of finger oils.
7. Repeat (if necessary): If the surface is still dirty, refold the PEC*PAD to expose a clean side or use a fresh wipe. Apply more fluid and repeat the cleaning process until the surface is clean and clear. Never reuse a dirty portion of the wipe.

5. Maintenance and Storage

To ensure the longevity and effectiveness of your Eclipse Optic Cleaning Fluid:

• Always replace the cap tightly after each use to prevent evaporation and contamination.
• Store the bottle upright in a cool, dry place, away from direct sunlight and extreme temperatures.
• Avoid storing in humid environments, as the fluid may attract moisture once opened.

6. Troubleshooting

• Streaks or Residue Remain: This typically indicates that the cleaning swab or wipe was either too dry, oversaturated, or reused. Ensure you are using a fresh, properly moistened swab/wipe for each pass and applying consistent, light pressure.
• Persistent Dust/Dirt: If stubborn particles remain, ensure thorough initial dust removal with an air blower. For sensors, ensure the correct size Sensor Swab is used. For lenses, ensure the PEC*PAD is folded to provide a clean, firm surface.
• Fluid Dries Too Quickly: Eclipse is designed to dry quickly. Work efficiently and ensure the swab/wipe is adequately moistened for the entire pass.

7. Specifications

8. Warranty and Support

Photographic Solutions stands behind the purity and quality of all its products. The Eclipse Optic Cleaning Fluid is backed by a 100% satisfaction guarantee.

If you encounter any problems with your order or the product, please contact Photographic Solutions directly for a guaranteed replacement or refund. For further assistance or inquiries, please visit the official Photographic Solutions website or contact their customer support.

For more information and related products, visit the Photographic Solutions Store on Amazon.

9. Official Product Videos

There are no official product videos from the seller available for embedding in this manual.