1. Product Overview
The Philips Advance Xitanium LED Driver is a high-performance electronic driver designed for LED fixture arrays. It provides reliable and efficient power conversion for various lighting applications, featuring 0-10V dimming capabilities for flexible light control. This driver is suitable for both dry and damp locations.
An image showing the Philips Advance Xitanium 150W 0.53A LED Electronic Driver. The black rectangular unit has a label detailing specifications, input/output wiring, and certifications. Wires for input, output, and dimming are visible at one end, and mounting tabs are present at both ends.
2. Safety Information
Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- WARNING: Risk of electric shock. Disconnect power before installation or servicing.
- Installation should be performed by a qualified electrician in accordance with national and local electrical codes.
- Ensure the driver is properly grounded.
- Do not exceed the specified input voltage or output current.
- This device is designed for use in dry and damp locations only.
- Operating temperature should not exceed 80°C.
This product complies with various safety standards, including CE, UL, NEMA, RoHS, cULus, and SP certifications.
3. What's in the Box
- Xitanium LED Driver Unit
- Instruction Guide (this document)
4. Specifications
| Parameter | Value |
|---|---|
| Model Number | LED-INTA-0530C-280-DO |
| Input Voltage | 120-277V AC |
| Output Voltage | 120-280V DC |
| Input Current | 1.40/0.60A AC |
| Output Current | 0.53A DC |
| Input Power | 165 W |
| Output Power | 150 W |
| Dimming Type | 0-10V Dimming |
| Power Factor (PF) | >0.9 |
| Frequency | 50/60Hz |
| Max. Open Circuit Voltage | 375V DC |
| Dimensions (L x W x H) | 9.5 x 2.6 x 2.3 inches |
| Item Weight | 1.98 Pounds |
| Case Form Factor | Long, Standard Profile, Class 2 |
| Certifications | CE, UL, NEMA, RoHS, cULus, SP |
| Assembly Location | Mexico |
5. Setup and Installation
Installation must be performed by a qualified professional. Ensure all local and national electrical codes are followed.
Wiring Diagram:
Refer to the label on the driver for precise wiring connections. The general connections are as follows:
- Input (AC Power):
- Black Wire: Line
- White Wire: Neutral
- Output (DC to LED Fixture):
- Red Wire: Positive (+)
- Blue Wire: Negative (-)
- 0-10V Dimming Control:
- Violet Wire: Positive (+)
- Gray Wire: Negative (-)
- Grounding: The driver case MUST BE GROUNDED.
Installation Steps:
- Disconnect all power to the circuit before beginning installation.
- Mount the LED driver securely in a suitable enclosure or fixture, ensuring adequate ventilation and adherence to maximum operating temperature (Max 80°C).
- Connect the AC input wires (Black for Line, White for Neutral) to the main power supply.
- Connect the DC output wires (Red for Positive, Blue for Negative) to your LED fixture. Ensure correct polarity.
- If using 0-10V dimming, connect the Violet wire to the positive dimming control and the Gray wire to the negative dimming control.
- Ensure the driver case is properly grounded.
- Verify all connections are secure and insulated.
- Restore power to the circuit.
6. Operating Instructions
Once properly installed and powered, the LED driver will supply constant current to the connected LED fixture. The 0-10V dimming function allows for external control of light output.
- Power On/Off: The LED fixture will illuminate when power is supplied to the driver.
- Dimming: Connect a compatible 0-10V dimmer to the violet and gray dimming wires. Adjusting the dimmer will vary the light output from the LED fixture. A 10V signal typically corresponds to 100% light output, while 0V corresponds to the minimum dimming level or off, depending on the dimmer and fixture.
7. Maintenance
The Philips Advance Xitanium LED Driver is designed for long-term, reliable operation and requires minimal maintenance.
- Cleaning: Periodically, gently wipe the exterior of the driver with a dry, clean cloth to remove dust and debris. Do not use liquid cleaners or solvents.
- Inspection: Annually, inspect the wiring connections for any signs of wear, corrosion, or loose terminals. Ensure the mounting is still secure.
- No User-Serviceable Parts: Do not attempt to open or repair the driver. There are no user-serviceable parts inside. Any unauthorized tampering will void the warranty.
8. Troubleshooting
If you experience issues with your LED driver, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| LEDs do not light up | No power to the driver Incorrect wiring Faulty LED fixture | Check power supply and circuit breaker. Verify all wiring connections (input, output, ground) are correct and secure. Test the LED fixture with a known good driver, or test the driver with a known good fixture. |
| LEDs flicker or dim erratically | Loose connections Incompatible dimmer Overload | Check all wiring connections for tightness. Ensure the 0-10V dimmer is compatible with LED drivers. Verify the total wattage of the LED fixture does not exceed the driver's output power (150W). |
| Driver is hot to the touch | Insufficient ventilation Overload | Ensure the driver is installed in a location with adequate airflow and not exceeding the maximum operating temperature. Verify the total wattage of the LED fixture does not exceed the driver's output power. |
If the problem persists after following these steps, contact Philips Advance technical support.
9. Warranty and Support
This Philips Advance Xitanium LED Driver is manufactured by Philips Advance. For warranty information, please refer to the official Philips Advance warranty statement available on their website or contact their customer service.
For technical assistance or further inquiries, please contact Philips Advance Technical Support:
- Phone: 1-800-372-3331
- Website: Visit the official Philips Lighting or Philips Advance website for the latest support resources and contact information.
