GEDORE ETPG 500 Torque Wrench Case Base Instruction Manual

Introduction

This manual provides detailed instructions for the proper setup, operation, and maintenance of the GEDORE ETPG 500 Torque Wrench Case Base. This device is designed to facilitate precise torque measurement and data transfer for compatible GEDORE torque wrenches.

The ETPG 500 Case Base features a robust cast aluminum construction and offers high precision for torque readings.

Safety Information

Always observe general safety regulations when working with tools and equipment. Ensure the device is used in a stable environment and handled with care to prevent damage or injury.

• Do not expose the device to extreme temperatures or moisture.
• Ensure proper power supply connections.
• Refer to the torque wrench's individual manual for specific operating instructions related to the wrench itself.

Product Overview

The GEDORE ETPG 500 Case Base is a specialized unit designed to interface with GEDORE torque wrenches, enabling accurate measurement and data communication. Key features include:

• Construction: Cast aluminum housing (excluding ETPG 3150 models).
• Data Interface: RS232 serial interface for PC connectivity.
• Precision: High accuracy with +/-1% tolerance for values and readings, +/-1 digit.
• Measurement Range: Wide range of measurement units including N·m, cN·m, lbf·ft, or lbf·in, depending on the specific torque wrench model used with the base.
• Power Supply: Euro connector for power input.

Figure 1: The Gedore ETPG 500 Case Base, a grey, textured housing with a serial interface port and a hexagonal opening on the side, designed to hold a torque wrench for measurement and data transfer.

Setup

1. Unpacking: Carefully remove the ETPG 500 Case Base from its packaging. Inspect for any signs of damage.
2. Placement: Place the unit on a stable, level surface.
3. Power Connection: Connect the power supply using the provided Euro connector to a suitable power outlet.
4. PC Connection (Optional): If data transfer is required, connect the RS232 serial interface port on the case base to your PC using a compatible serial cable. Ensure the necessary software drivers are installed on your computer.
5. Torque Wrench Insertion: Insert the compatible GEDORE torque wrench into the designated opening on the case base. Ensure it is securely seated.

Operating Instructions

The ETPG 500 Case Base acts as an interface for your torque wrench. Specific operational steps will depend on the torque wrench model and the software used for data acquisition.

1. Power On: Once connected, power on the unit (if applicable, some units may power on automatically upon connection).
2. Unit Selection: If the case base or connected software allows, select the desired measurement unit (N·m, cN·m, lbf·ft, or lbf·in).
3. Measurement: Perform torque measurements as per the instructions for your specific GEDORE torque wrench. The case base will process and display/transmit the readings.
4. Data Transfer: If connected to a PC, use the appropriate software to log, analyze, or export measurement data via the RS232 interface.

Maintenance

Regular maintenance ensures the longevity and accuracy of your GEDORE ETPG 500 Case Base.

• Cleaning: Clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the unit in a dry, dust-free environment when not in use.
• Calibration: While the case base itself is a measurement interface, ensure that the torque wrench used with it is regularly calibrated according to manufacturer recommendations to maintain accuracy.
• Inspection: Periodically inspect cables and connectors for wear or damage.

Troubleshooting

If you encounter issues with your ETPG 500 Case Base, consider the following:

• No Power: Check the power cable connection and the power outlet. Ensure the Euro connector is fully inserted.
• No PC Connection: Verify the RS232 cable connection. Ensure the correct drivers are installed on your PC and the communication settings (e.g., baud rate) match.
• Inaccurate Readings: This is often related to the torque wrench itself. Ensure the torque wrench is properly seated in the case base and has been recently calibrated.
• Error Messages: Refer to the specific error codes or messages displayed by the connected torque wrench or PC software for detailed solutions.

Specifications

Warranty and Support

For warranty information and technical support, please contact GEDORE customer service or refer to the official GEDORE website. Keep your purchase receipt for warranty claims.

Manufacturer: GEDORE

Part Number: 2795914

ASIN: B00OHOYCIG