Breville Nutridisk Filter Basket Instruction Manual

Product Overview

This manual provides essential information for the Breville Nutridisk Filter Basket, OEM Part Number .BJE820XL/17. This component is designed as a replacement part for specific Breville juicer models, ensuring continued optimal performance.

It is an O.E.M. authorized part, manufactured in the USA, and is specifically known as the Nutridisk Filter Basket BASKET BR-3.

Image: The Breville Nutridisk Filter Basket, a replacement component for Breville juicers. It features a fine mesh filter and a central cutting blade, designed to extract juice efficiently.

Compatibility

The Breville Nutridisk Filter Basket (OEM Part Number .BJE820XL/17) is compatible with the following Breville juicer models:

• Breville Juice Fountain Elite 800JEXL
• Breville Juice Fountain Duo BJE820XL

Ensure your juicer model matches one of the listed compatible models before installation.

Setup and Installation

This section outlines the general steps for installing the Nutridisk Filter Basket. Always refer to your specific juicer's original instruction manual for detailed, model-specific installation procedures.

1. Safety First: Before beginning, ensure your juicer is unplugged from the power outlet.
2. Disassembly: Carefully disassemble the top components of your juicer, including the juicer cover, pulp container, and any other parts that obstruct access to the existing filter basket.
3. Remove Old Basket: Gently lift and remove the old or damaged filter basket from the motor base.
4. Inspect: Inspect the motor coupling area for any debris or damage. Clean if necessary.
5. Install New Basket: Align the new Breville Nutridisk Filter Basket (.BJE820XL/17) with the motor coupling in the juicer base. Press down firmly until it is securely seated. Ensure it clicks into place if your model has a locking mechanism.
6. Reassembly: Reassemble the remaining juicer components in reverse order of disassembly. Ensure all parts are correctly aligned and securely fastened before use.

Operating Considerations

The Nutridisk Filter Basket is a critical component for juicing. Proper operation of your juicer with this new basket involves:

• Secure Placement: Always ensure the filter basket is correctly seated and locked into the juicer base before operating the appliance.
• Food Preparation: Prepare fruits and vegetables according to your juicer's original instructions (e.g., washing, peeling, cutting into appropriate sizes).
• Feeding Chute: Use the food pusher to guide ingredients into the feeding chute, applying gentle and even pressure. Avoid forcing ingredients, as this can strain the motor and damage the basket.
• Continuous Operation: Adhere to the recommended continuous operation times specified in your juicer's manual to prevent motor overheating.

Maintenance and Cleaning

Regular cleaning and maintenance of the Nutridisk Filter Basket are essential for optimal performance and longevity.

1. Immediate Cleaning: Clean the filter basket immediately after each use to prevent pulp and fiber from drying and hardening in the mesh.
2. Disassembly for Cleaning: Unplug the juicer and disassemble the components. Remove the filter basket.
3. Rinsing: Rinse the filter basket under running water. Use a brush (often supplied with juicers) to thoroughly clean the fine mesh filter and the cutting blade. Pay close attention to the small holes in the mesh to ensure they are clear of pulp.
4. Soaking (Optional): For stubborn residue, soak the filter basket in warm, soapy water for a few minutes before scrubbing.
5. Dishwasher Safety: Refer to your original juicer manual regarding dishwasher safety for the filter basket. If dishwasher safe, place it on the top rack.
6. Drying: Allow all components to air dry completely before reassembling or storing.

Note: Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the mesh and other components of the filter basket.

Troubleshooting

If you encounter issues after replacing the Nutridisk Filter Basket, consider the following common troubleshooting steps:

• Juicer Not Starting:
  • Ensure the filter basket is correctly seated and locked into the motor base. Many juicers have safety interlocks that prevent operation if components are not properly assembled.
  • Check that the juicer cover is securely latched.
• Reduced Juice Yield or Wet Pulp:
  • The mesh of the filter basket may be clogged. Thoroughly clean the mesh using the provided brush or a stiff-bristled brush.
  • Ensure you are not overloading the juicer or applying excessive pressure with the food pusher.
• Excessive Vibration or Noise:
  • Verify that the filter basket is properly centered and securely seated on the motor coupling.
  • Check for any foreign objects or debris lodged in the basket or around the motor shaft.

If issues persist, consult the original Breville juicer manual or contact Breville customer support.

Specifications

Warranty and Support

As an OEM replacement part, the warranty for the Nutridisk Filter Basket is typically covered under the terms of the original juicer's warranty, or a specific warranty for replacement parts as provided by Breville or the authorized seller. Please retain your purchase receipt for warranty claims.

For specific warranty details or technical support, it is recommended to contact Breville customer service directly or visit their official website. You can often find contact information in your original juicer manual or on the Breville Store on Amazon.