Braven BRV-1 Portable Waterproof Bluetooth Speaker User Manual

Introduction

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Braven BRV-1 Portable Waterproof Bluetooth Speaker. Please read this manual thoroughly before using your device to ensure optimal performance and longevity.

Package Contents

• 1 x Braven BRV-1 Bluetooth Speaker
• 1 x USB Charging Cable
• 1 x 3.5mm Audio Cable
• 1 x Lanyard/Strap

Product Overview

This image displays the Braven BRV-1 speaker from a slight angle, highlighting its gray and red color scheme. The front features a black perforated speaker grille secured by visible screws. A red accent line runs along the side, leading to a red button or cover. The speaker's rugged, rectangular design is evident, with a reflective surface below it.

The Braven BRV-1 is a compact, rugged, and waterproof Bluetooth speaker designed for portability and outdoor use. It features a durable exterior, integrated controls, and multiple connectivity options.

Key Features:

• IPX7 Waterproof Rating: Protected against immersion in water up to 1 meter for 30 minutes.
• Bluetooth Connectivity: Wireless audio streaming with a range of up to 10 meters (33 feet).
• Integrated Speakerphone: Built-in noise-canceling microphone for hands-free calls.
• Power Bank Functionality: 4000mAh internal battery capacity to charge external devices.
• Long Playtime: Up to 12 hours of continuous audio playback.
• Boost Mode: Enhances audio output for larger outdoor areas.

Setup

1. Charging the Speaker

1. Locate the Micro-USB charging port, typically protected by a waterproof seal.
2. Open the seal and connect the provided Micro-USB cable to the speaker.
3. Connect the other end of the USB cable to a powered USB port (e.g., computer, wall adapter).
4. The LED indicator will illuminate to show charging status. A full charge typically takes several hours.
5. Ensure the waterproof seal is securely closed after charging to maintain water resistance.

2. Powering On/Off

• To Power On: Press and hold the Power button (usually marked with a power symbol) until you hear an audible tone or see the LED indicator light up.
• To Power Off: Press and hold the Power button again until you hear an audible tone or the LED indicator turns off.

3. Bluetooth Pairing

1. Ensure the speaker is powered on and within 10 meters (33 feet) of your Bluetooth-enabled device.
2. The speaker will automatically enter pairing mode when first powered on, or if it cannot find a previously paired device. The LED indicator will flash, indicating it is ready to pair.
3. On your device (smartphone, tablet, etc.), navigate to the Bluetooth settings.
4. Search for available devices and select "BRAVEN BRV-1" from the list.
5. Once paired, the speaker will emit an audible confirmation tone, and the LED indicator will stop flashing and remain solid.
6. If prompted for a password, enter "0000".

4. Wired Connection (AUX Input)

1. Locate the 3.5mm audio input port, typically protected by a waterproof seal.
2. Open the seal and connect one end of the provided 3.5mm audio cable to the speaker's AUX input.
3. Connect the other end of the cable to the headphone jack or audio output of your device.
4. The speaker will automatically switch to AUX input mode.
5. Ensure the waterproof seal is securely closed when not in use to maintain water resistance.

Operating Instructions

1. Playing Audio

• After successful Bluetooth pairing or AUX connection, begin playing audio from your source device.
• Use the volume buttons on the speaker (typically '+' and '-') to adjust the playback volume.
• You can also control playback (play/pause, skip tracks) directly from your connected device.

2. Speakerphone Function

• When a call is received while connected via Bluetooth, the music will pause.
• Press the Play/Pause/Call button (often indicated by a phone icon) to answer the call.
• Speak into the speaker's built-in microphone.
• Press the Play/Pause/Call button again to end the call.

3. Boost Mode

• The BRV-1 features a Boost Mode designed to increase audio output for larger outdoor environments.
• Refer to the specific button layout on your device for the Boost Mode activation button, typically a dedicated button or a combination press.
• Activate Boost Mode for enhanced sound projection when needed.

4. Charging External Devices (Power Bank)

• The Braven BRV-1 includes a 4000mAh internal battery that can be used to charge other USB-powered devices.
• Locate the USB output port, typically protected by a waterproof seal.
• Open the seal and connect your device's charging cable to the speaker's USB output port.
• The speaker will begin charging your device.
• Ensure the waterproof seal is securely closed when not in use to maintain water resistance.

Maintenance

1. Waterproofing Guidelines (IPX7)

• The BRV-1 is rated IPX7, meaning it can be immersed in water up to 1 meter (3 feet) for 30 minutes.
• Always ensure all port covers and seals are completely and securely closed before exposing the speaker to water. Failure to do so will compromise its water resistance and may cause damage.
• Do not expose the speaker to saltwater or chlorinated water for extended periods. Rinse with fresh water after exposure to such environments.
• Avoid dropping the speaker or subjecting it to strong impacts, as this can damage the seals.

2. Cleaning

• Wipe the speaker with a soft, damp cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals.
• Ensure the speaker is completely dry before opening any port covers or charging.

3. Storage

• Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• For long-term storage, charge the battery to approximately 50% to preserve battery health.

Troubleshooting

• No Power:
  Ensure the speaker is fully charged. Connect it to a power source using the USB cable and check the charging indicator.
• Cannot Pair via Bluetooth:
  Make sure the speaker is in pairing mode (flashing LED). Turn off and on your device's Bluetooth. Move the speaker closer to your device. If previously paired, try unpairing and re-pairing.
• No Sound:
  Check the volume levels on both the speaker and your connected device. Ensure the correct input source (Bluetooth or AUX) is selected. If using AUX, ensure the cable is fully inserted.
• Poor Sound Quality:
  Ensure the speaker is within Bluetooth range and there are no obstructions. Check the audio quality of the source file or streaming service.
• Speakerphone Not Working:
  Ensure the speaker is connected via Bluetooth. Check your device's audio settings to confirm the BRV-1 is selected for calls.
• External Device Not Charging:
  Ensure the speaker has sufficient battery charge. Verify the USB cable is correctly connected to the speaker's USB output port and your device.

Specifications

Warranty and Support

The Braven BRV-1 speaker comes with a Full Warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official Braven website.

If you encounter any issues not covered in this manual or require further assistance, please contact Braven customer support through their official channels. Keep your proof of purchase for warranty claims.