1. Product Overview
This manual provides detailed instructions for the proper use and care of your Viceroy Fernando Alonso 47935-57 Limited Edition Chronograph Watch. This timepiece combines precision quartz movement with a robust design, featuring chronograph functionality and water resistance suitable for daily wear.
Figure 1: Viceroy Fernando Alonso 47935-57 Chronograph Watch. This image displays the watch face with its black dial, red accents, three sub-dials, and date window. The watch features a red silicone strap and red pushers on the side of the case.
2. Initial Setup
2.1. Setting the Time
- Pull the crown (B) out to position 2.
- Rotate the crown (B) to set the hour and minute hands to the correct time.
- Push the crown (B) back into position 0.
2.2. Setting the Date
- Pull the crown (B) out to position 1.
- Rotate the crown (B) clockwise or counter-clockwise to set the correct date.
- Push the crown (B) back into position 0.
Note: Avoid setting the date between 9:00 PM and 3:00 AM, as this may interfere with the date change mechanism.
3. Operating the Chronograph
Your watch is equipped with a chronograph function for measuring elapsed time.
3.1. Standard Chronograph Measurement
- Press pusher (A) to start the chronograph. The chronograph second hand will begin to move.
- Press pusher (A) again to stop the chronograph. The elapsed time will be indicated by the chronograph hands.
- Press pusher (C) to reset the chronograph. All chronograph hands will return to their zero positions.
3.2. Accumulative Elapsed Time Measurement
- Press pusher (A) to start the chronograph.
- Press pusher (A) to stop the chronograph (e.g., at the end of a lap).
- Press pusher (A) again to restart the chronograph and continue measuring.
- Repeat steps 2 and 3 as needed.
- After the final measurement, press pusher (C) to reset the chronograph to zero.
4. Care and Maintenance
4.1. Cleaning
Regularly wipe the watch case and strap with a soft, dry cloth. For the silicone strap, a damp cloth with mild soap can be used, followed by thorough drying.
4.2. Water Resistance
This watch is water-resistant up to 50 meters (5 ATM). This rating means it is suitable for short periods of recreational swimming. It is not suitable for diving, snorkeling, or high-impact water sports. Ensure the crown and pushers are fully pushed in before any contact with water.
4.3. Battery Replacement
The watch is powered by a quartz movement requiring a battery. When the battery is depleted, the watch will stop. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
5. Troubleshooting
- Watch Not Running: Check if the crown is fully pushed in. If the watch still does not run, the battery may need replacement.
- Incorrect Time/Date: Refer to Section 2 for instructions on setting the time and date.
- Chronograph Hands Not Resetting to Zero: This may indicate a need for chronograph hand calibration. Consult a professional watch repair service.
6. Specifications
- Model: Viceroy Fernando Alonso 47935-57
- Movement: Quartz
- Display: Analog
- Case Material: Stainless Steel (Silver-plated)
- Case Diameter: 46 mm
- Strap Material: Rubber (Red)
- Bezel Color: Red
- Crystal: Mineral
- Water Resistance: 50 Meters (5 ATM)
- Functions: Time, Date, Chronograph
7. Warranty and Support
Your Viceroy watch is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. For technical support, repairs, or warranty claims, please contact your authorized Viceroy dealer or the official Viceroy customer service channels.
Keep your proof of purchase for warranty validation.