1. Introduction
Thank you for choosing the AnzoUSA 861095 Chrome 6-inch HID Off-Road Lights. This manual provides essential information for the safe installation, operation, and maintenance of your new off-road lights. Please read these instructions thoroughly before installation and retain this manual for future reference.
2. Safety Information
Always prioritize safety during installation and operation. Failure to follow these instructions may result in property damage, injury, or voiding of your warranty.
- Professional Installation Recommended: If you are not familiar with automotive electrical systems, it is highly recommended to have these lights installed by a qualified professional.
- Electrical Safety: Disconnect the vehicle's battery before beginning any electrical work to prevent electrical shock or short circuits. Ensure all wiring connections are secure and properly insulated.
- Mounting Security: Ensure the lights are securely mounted to the vehicle to prevent them from becoming loose during operation, which could cause a hazard.
- Heat: HID lights generate heat. Ensure adequate ventilation and avoid touching the lights immediately after use.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
3. Package Contents
Verify that all components are present before beginning installation:
- Two (2) AnzoUSA 6-inch Chrome HID Off-Road Lights with Covers
- Wiring Harness
- Switch
4. Specifications
| Feature | Detail |
|---|---|
| Brand | ANZO USA |
| Model | 861095 |
| Color | Chrome |
| Vehicle Service Type | Car |
| Special Feature | Waterproof |
| Auto Part Position | Right (for a pair, typically refers to the side of installation) |
| Lens Color | Clear |
| Item Dimensions (L x W x H) | 16 x 11 x 8 inches (Package Dimensions) |
| Item Weight | 6.5 pounds |
| UPC | 846959047303 |
| Assembly Required | No |
5. Setup and Installation
This section outlines the general steps for installing your AnzoUSA off-road lights. Specific vehicle requirements may vary.
- Plan Mounting Location: Determine the desired mounting location on your vehicle (e.g., bumper, grille guard). Ensure the location provides a stable surface and does not obstruct vehicle functions or other lights.
- Secure Mounting: Use appropriate hardware to securely attach the light brackets to the chosen location. Ensure the lights are aimed correctly before final tightening.
- Wiring Connection: Connect the provided wiring harness to the lights. Route the wiring safely away from moving parts, hot surfaces, and sharp edges. Connect the wiring harness to the vehicle's electrical system, incorporating the provided switch. It is crucial to ensure proper grounding and fuse protection.
- Test Functionality: Once all connections are made and secured, reconnect the vehicle's battery and test the lights using the switch. Verify that both lights illuminate correctly.
Important: If you are unsure about any step of the installation process, consult a professional automotive technician.
Image 1: A pair of AnzoUSA 6-inch Chrome HID Off-Road Lights, featuring a polished chrome finish and protective grille covers. These lights are designed for enhanced visibility in off-road conditions.
Image 2: A single AnzoUSA 6-inch Chrome HID Off-Road Light shown from a side angle, highlighting its robust construction, chrome housing, and the integrated protective cover.
6. Operating Instructions
Operating your AnzoUSA off-road lights is straightforward:
- Power On/Off: Use the installed switch to turn the off-road lights on or off.
- Usage: These lights are intended for off-road use or in situations where additional illumination is permitted by local laws. Always be aware of and comply with local regulations regarding auxiliary lighting on public roads.
7. Maintenance
Proper maintenance will ensure the longevity and performance of your off-road lights:
- Cleaning: Clean the light lenses and chrome housing regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners that could scratch the surface or damage the waterproof seals.
- Inspection: Periodically inspect the mounting hardware and wiring connections for tightness and signs of wear or corrosion. Tighten any loose fasteners.
- Weather Resistance: The lights feature weather-resistant housing. However, avoid directing high-pressure water sprays directly at the seals for extended periods.
8. Troubleshooting
If you encounter issues with your off-road lights, consider the following troubleshooting steps:
- Lights Not Turning On:
- Check the fuse in the wiring harness. Replace if blown.
- Verify all electrical connections are secure and free of corrosion.
- Ensure the switch is functioning correctly.
- Confirm the vehicle's battery has sufficient charge.
- Dim or Flickering Lights:
- Inspect wiring for loose connections or damage.
- Check for proper grounding.
- Ensure the vehicle's charging system is operating correctly.
- Moisture Inside Lens:
- While the lights are waterproof, extreme temperature changes can sometimes cause condensation. If persistent, inspect seals for damage.
If these steps do not resolve the issue, please contact AnzoUSA customer support.
9. Warranty and Support
For warranty information, technical support, or replacement parts, please contact AnzoUSA directly. Keep your proof of purchase for any warranty claims.
You can find more information about AnzoUSA products and support on their official website or through their Amazon store page: ANZO USA Store
10. Contact Information
For further assistance, please refer to the contact details provided by AnzoUSA on their official product packaging or website.