Introduction
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Newco 100145 Tomlinson Faucet. Please read this manual thoroughly before installation and use, and retain it for future reference.
Safety Information
- Always turn off the main water supply before beginning any installation or maintenance.
- Ensure all connections are secure to prevent leaks.
- Use appropriate tools and follow local plumbing codes.
- If you are unsure about any step, consult a qualified plumber.
Package Contents
Verify that all components are present before proceeding with installation.
- Newco 100145 Tomlinson Faucet (1 unit)
- Mounting hardware (nuts, washers)
Figure 1: The Newco 100145 Tomlinson Faucet, featuring a polished chrome body and a red lever handle marked "HOT".
Setup and Installation
The Newco 100145 Tomlinson Faucet is designed for single-hole installation.
- Prepare the Mounting Surface: Ensure the mounting hole on your sink or countertop is clean and appropriately sized for a single-hole faucet.
- Insert Faucet: Place the faucet body through the mounting hole. Ensure the faucet is oriented correctly.
- Secure Faucet: From underneath the sink, slide the rubber washer, metal washer, and mounting nut onto the threaded shank of the faucet. Tighten the mounting nut securely by hand, then use a wrench to snug it further, ensuring the faucet is stable and does not wobble.
- Connect Water Supply: Attach the water supply line to the threaded inlet on the faucet shank. Use plumber's tape on the threads and tighten connections firmly but do not overtighten.
- Check for Leaks: Slowly turn on the main water supply and inspect all connections for any signs of leakage. Tighten connections as necessary.
Figure 2: Side view illustrating the threaded shank and connection point for the water supply line.
Figure 3: Bottom view of the faucet, showing the aerator and the main body construction.
Operating Instructions
The Newco 100145 Tomlinson Faucet features a simple lever operation.
- To Dispense Water: Push the red lever handle downwards. Water will flow from the spout.
- To Stop Water Flow: Release the lever handle. The handle will return to its upright position, stopping the water flow.
- This faucet is designed for hot water dispensing, as indicated by the "HOT" marking on the handle.
Maintenance
Regular maintenance will ensure the longevity and optimal performance of your faucet.
- Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the polished finish.
- Aerator Maintenance: If water flow becomes restricted, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse thoroughly before reattaching.
- Leak Checks: Periodically check all connections for leaks. Tighten any loose connections as needed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaks from connections. | Loose connections or worn washers. | Tighten connections. Replace washers if necessary. Ensure plumber's tape was used. |
| Low water flow. | Clogged aerator or partially closed water supply valve. | Clean the aerator. Ensure the water supply valve is fully open. |
| Faucet does not dispense water. | Main water supply is off or supply line is kinked. | Check if the main water supply is on. Inspect the supply line for kinks. |
Specifications
- Brand: Newco
- Model Number: 100145
- Finish Type: Polished
- Number of Handles: 1 (Lever)
- Installation Type: Single Hole
- Item Weight: 0.2 Pounds
- UPC: 756655187312
- Manufacturer Part Number: NW100145
Warranty and Support
For warranty information or technical support, please contact Newco directly through their official website or customer service channels. Keep your purchase receipt as proof of purchase.
For more information, visit the official Newco website: www.newcocoffee.com