Product Overview
This manual provides instructions for the proper installation, application, and maintenance of the Halex 91627 Multi-Piece Liquid Tight Straight Connector. This connector is designed to secure and seal liquid-tight flexible metal conduit (LFMC) or liquid-tight flexible non-metallic conduit (LFNC) to an oil-tight, dust-tight, and watertight box or enclosure.
Image of the Halex 91627 Multi-Piece Liquid Tight Straight Connector, showing its threaded body, sealing ring, and compression nut.
Installation Instructions
Follow these steps for proper installation of the Halex 91627 Liquid Tight Straight Connector:
- Ensure power is disconnected before beginning installation.
- Thread the connector body into the knockout or threaded entry of the electrical box or enclosure.
- Secure the connector body with the locknut from inside the enclosure, tightening it firmly to ensure a secure connection.
- Insert the liquid-tight flexible conduit into the connector's compression nut end.
- Tighten the compression nut onto the connector body. Ensure the conduit is fully seated and the sealing ring compresses around the conduit jacket to create a liquid-tight seal.
- Verify all connections are tight and secure to prevent moisture or dust ingress.
Functionality and Application
The Halex 91627 connector provides a secure, liquid-tight, and dust-tight connection for flexible conduit in various electrical installations. It is suitable for use in wet or damp locations, protecting electrical conductors from moisture, oils, and dust.
Maintenance
Regular inspection of the connector is recommended to ensure continued performance.
- Periodically check for any signs of wear, corrosion, or damage to the connector body or sealing components.
- Ensure the compression nut remains tightly secured to maintain the liquid-tight seal.
- If the connector is exposed to harsh environments, clean it as needed to prevent buildup that could compromise its integrity.
- Replace any damaged connectors immediately to ensure safety and system integrity.
Troubleshooting
If issues arise, consider the following:
- Leakage or Moisture Ingress:
- Check if the compression nut is sufficiently tightened.
- Verify that the conduit is properly seated within the connector.
- Inspect the sealing ring for damage or improper placement.
- Ensure the locknut securing the connector to the enclosure is tight.
- Loose Connection:
- Re-tighten the compression nut and the locknut.
- Ensure the conduit size matches the connector's specified size (0.75-inch).
Product Specifications
| Feature | Detail |
|---|---|
| Part Number | 91627 |
| Item Weight | 10.35 pounds |
| Product Dimensions | 6 x 3.13 x 6.13 inches |
| Item Package Quantity | 45 |
| Brand | Halex |
| Unit Count | 45.0 Count |
| UPC | 051411916275 |
Warranty Information
Specific warranty details for the Halex 91627 connector are typically provided by the manufacturer at the point of purchase or on their official website. Please refer to the official Halex website or contact their customer support for current warranty terms and conditions.
Customer Support
For further assistance, technical questions, or support regarding the Halex 91627 Multi-Piece Liquid Tight Straight Connector, please visit the official Halex website or contact their customer service department.