Jelmar CLR PRO Calcium, Lime, and Rust Remover User Manual

Introduction

The Jelmar CLR PRO Calcium, Lime, and Rust Remover is a powerful multi-purpose cleaner designed to effectively remove tough calcium, lime, and rust deposits from various surfaces. This manual provides essential instructions for safe and effective use of the product.

Safety Information

WARNING: This product contains chemicals that require careful handling. Always read and follow all instructions and warnings on the product label before use.

• Keep out of reach of children and pets.
• Avoid contact with eyes, skin, and clothing. In case of contact, rinse immediately with plenty of water for at least 15 minutes. If irritation persists, seek medical attention.
• Do not ingest. If swallowed, do not induce vomiting. Drink a glass of water and seek immediate medical attention.
• Use in a well-ventilated area.
• Wear appropriate personal protective equipment (PPE) such as chemical-resistant gloves and eye protection.
• Do not mix with bleach or other household cleaners, as this may release hazardous gases.
• Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

Preparation and Application

Before applying CLR PRO, ensure the area is well-ventilated. Test the product on an inconspicuous area first to ensure compatibility with the surface material. Always refer to the product label for specific dilution ratios and application instructions.

General Application Steps

1. Dilute CLR PRO as recommended for the specific application (refer to product label for precise dilution ratios).
2. Apply CLR PRO directly to the affected surface using a sponge, brush, or cloth.
3. Allow the product to work for 2-10 minutes, depending on the severity of the buildup. Do not allow the product to dry on the surface.
4. Rinse the treated area thoroughly with cold water.
5. Repeat if necessary for stubborn stains.

Specific Applications

• Glassware, Tile, Tea and Coffee Pots: Effectively dissolves calcium deposits. Apply, allow to penetrate, then rinse thoroughly.
• Humidifiers, Tubs, Toilets, Sinks: Dissolves lime scale buildup. Apply, allow to penetrate, then rinse thoroughly.
• Stucco, Brick, Porcelain, Chrome, Metal: Zaps rust stains. Apply, allow to penetrate, then rinse thoroughly.
• Plumbing (Copper, Plastic PVC): Safe for use on these materials to dissolve various types of buildup.

Image: A 128oz bottle of Jelmar CLR PRO Calcium, Lime, and Rust Remover, illustrating the product packaging.

Storage and Disposal

Store CLR PRO in its original container, tightly closed, in a cool, dry, well-ventilated area, away from direct sunlight and incompatible materials. Do not freeze. Dispose of unused product and empty containers according to local regulations and guidelines. Consult your local waste management authority for proper disposal methods.

Troubleshooting

If the product does not effectively remove the deposits after the first application, ensure you have followed the instructions carefully. For very heavy buildup, a longer dwell time (within recommended limits) or a second application may be necessary. Ensure proper dilution ratios are maintained as per the product label. If issues persist, or for particularly stubborn stains, contact customer support for further guidance.

Product Specifications

Warranty and Support

For product inquiries, technical assistance, or warranty information, please contact Jelmar customer support directly. Refer to the product packaging for the most current contact details and specific warranty terms.

Note: Specific warranty terms and conditions may vary. Please retain your proof of purchase.