CubicFun 3D Puzzle Masjid Al-Haram Instruction Manual

1. Introduction

This manual provides detailed instructions for assembling and caring for your CubicFun 3D Puzzle of Masjid Al-Haram, the Grand Mosque of Mecca. This model is designed for an engaging and educational building experience, resulting in a detailed replica of the iconic structure.

2. Safety Information

• Choking Hazard: This product contains small parts and is not suitable for children under 3 years of age. Adult supervision is recommended during assembly, especially for younger builders.
• Keep all packaging materials away from children to prevent suffocation.
• Handle puzzle pieces with care to avoid bending or tearing.

3. Package Contents

Verify that all components are present before beginning assembly:

• Pre-cut puzzle sheets (249 pieces)
• Instruction booklet with assembly diagrams

Note: No additional tools or glue are typically required for CubicFun 3D Puzzles, as pieces are designed to interlock securely.

4. Setup and Assembly

Follow these steps to assemble your 3D puzzle:

1. Preparation: Unpack all puzzle sheets and the instruction booklet. Lay out the sheets on a clean, flat surface.
2. Identify Pieces: Each puzzle piece is numbered. Refer to the assembly diagrams in the instruction booklet to identify the correct pieces for each step.
3. Punch Out Pieces: Carefully punch out the required pieces from their sheets. Use gentle pressure to avoid tearing. If a piece is difficult to remove, a craft knife (adult use only) can be used to carefully cut the connecting tabs.
4. Follow Sequence: Assemble the puzzle by following the numerical sequence indicated in the instruction booklet. The diagrams will show how pieces interlock.
5. Interlock Pieces: Fit the corresponding slots and tabs together. Ensure pieces are securely interlocked for stability. Some connections may require a firm but gentle push.
6. Structural Integrity: Pay close attention to the base and foundational elements first, as these provide stability for the entire model.
7. Detailed Sections: Assemble smaller, intricate sections (like minarets or domes) separately before attaching them to the main structure as indicated in the instructions.

Image: The CubicFun 3D Puzzle Masjid Al-Haram model displayed next to its packaging. The packaging shows the brand 'CubicFun' and the model name 'Masjid Al-Haram' along with item number MC178h and model size. The assembled puzzle features numerous minarets and domes, replicating the Grand Mosque.

5. Operating (Display)

Once assembled, your CubicFun 3D Puzzle is a display model. Place it on a stable, flat surface away from direct sunlight, excessive heat, or moisture to preserve its condition.

6. Maintenance

• Cleaning: Dust the model gently with a soft, dry cloth or a soft brush. Avoid using water or cleaning solutions, as they may damage the cardboard material.
• Storage: If disassembling for storage, do so carefully to avoid damaging the interlocking tabs. Store pieces in their original packaging or a secure container.
• Environmental Conditions: Keep the model in a dry environment. Humidity can cause the cardboard to warp or weaken.

7. Troubleshooting

• Pieces Not Fitting: Double-check the piece numbers against the instruction diagrams. Ensure the orientation of the piece is correct. Do not force pieces, as this can cause damage.
• Model Instability: Verify that all interlocking connections are secure. Re-examine the base and foundational layers for any loose connections.
• Missing Pieces: In the rare event of missing pieces, please contact CubicFun customer support with your product model number (MC178h) and a description of the missing part.
• Damaged Pieces: If a piece is damaged during assembly, attempt to reinforce it with a small amount of craft glue if necessary. For significantly damaged pieces, contact customer support.

8. Specifications

9. Warranty and Support

CubicFun products are manufactured to high-quality standards. For any inquiries regarding product defects, missing parts, or assembly assistance, please contact CubicFun customer support. Refer to the contact information provided on the product packaging or the official CubicFun website for the most up-to-date support channels.

Please retain your proof of purchase for warranty claims, if applicable.