Product Overview
The Modus Furniture Royal Queen Platform Bed is designed for comfort and durability. It features a 1-piece headboard, a steel center rail with support legs, and 24 wooden slats for mattress support. The bed's design incorporates vintage Chesterfield styling with a rollback top profile, diagonal stitching, and deep button tufting, all upholstered in a Dolphin Linen fabric.
Image: The Modus Furniture Royal Queen Platform Bed in Dolphin Linen, showcasing its tufted headboard and overall design.
Safety Information
- Ensure all components are securely fastened before use.
- Keep small parts away from children during assembly.
- Use on a level surface to prevent instability. Headboard legs are fitted with countersunk adjustable levelers for use on uneven floors.
- Do not exceed the bed's intended weight capacity.
Setup and Assembly
Assembly of the Modus Furniture Royal Queen Platform Bed is designed to be mostly tool-free, utilizing rubber clips and a thoughtful design for simplification. Due to the size of the 1-piece headboard, this product ships via freight carrier.
Components Included:
- Headboard
- Footboard
- Side Rails (Metal)
- Center Rail (Steel) with 2 support legs
- Wooden Slats (24 bent plywood slats)
Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging. Verify all components listed above are present.
- Attach Side Rails: Connect the metal side rails to the headboard and footboard using the provided hardware. The metal side and center rail brackets are designed for easy assembly.
- Install Center Rail: Position the steel center rail and attach its two support legs.
- Place Slats: Lay the 24 bent plywood wooden slats across the bed frame. These slats create a springier, more elastic mattress support.
- Adjust Levelers: The headboard legs are equipped with countersunk adjustable levelers. Adjust these as needed to ensure the bed is stable on uneven floors.
Image: Diagram showing the dimensions of the Royal Queen Platform Bed: 95 inches (length), 67 inches (width), and 54 inches (headboard height).
Image: Front view of the Royal Queen Platform Bed frame, highlighting the slat system and tufted headboard.
Image: Side view of the Royal Queen Platform Bed frame, showing the low-profile footboard and the bent plywood slats.
Operating Instructions
This platform bed is designed to support a mattress directly without the need for a box spring. The bent plywood slats provide a flexible and supportive base for your mattress.
- Place your Queen-sized mattress directly onto the wooden slats.
- Ensure the mattress is centered and evenly distributed on the frame.
- The headboard is designed to fit standard metal frames and can attach to most non-standard frames with a Modi-plate (sold separately if needed for headboard-only use).
Maintenance and Care
Proper care will extend the life and appearance of your Modus Furniture Royal Queen Platform Bed.
- Upholstery Care: The Dolphin Linen upholstery is made from 100% polyester, which is more stain-resistant than cotton or linen. For general cleaning, vacuum regularly with an upholstery attachment. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner.
- Frame Care: Wipe the wooden and metal components with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Periodic Check: Periodically check all bolts and connections to ensure they remain tight. Tighten if necessary.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading of the fabric.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels unstable or wobbly. | Loose connections or uneven floor. | Ensure all bolts are tightened. Adjust the levelers on the headboard legs to compensate for uneven flooring. |
| Squeaking noises. | Loose connections between frame components or slats. | Tighten all assembly hardware. Check that slats are properly seated and not rubbing against the frame. |
| Mattress sagging in certain areas. | Damaged or improperly placed slats. | Inspect the wooden slats for damage. Ensure all 24 slats are correctly positioned and evenly spaced. Replace any damaged slats. |
Specifications
- Model Number: 3ZH3L511
- Style: Platform
- Size: Queen
- Color: Royal - Dolphin Linen
- Frame Material: Metal and Wood
- Upholstery Material: 100% Polyester (Linen-like fabric)
- Dimensions (L x W x H): 95" x 67" x 54"
- Item Weight: 116 Pounds
- Special Features: Adjustable levelers, Bent plywood slats, Tufted headboard
- Assembly Required: Yes
Warranty Information
The Modus Furniture Royal Queen Platform Bed is covered by a 1-year manufacturer's warranty.
The manufacturer will ship replacement parts at no charge for up to 1 year from the date of delivery to correct defects determined at the manufacturer's discretion to be related to manufacturing or workmanship.
For warranty claims, please retain your proof of purchase and contact Modus Furniture customer support.
Customer Support
For further assistance, questions, or to report missing/damaged parts, please contact Modus Furniture customer support.
- Online: Visit the official Modus Furniture Store on Amazon.
- Additional Resources: Refer to the Installation Manual (PDF) for detailed assembly instructions.
Official Product Video
Video: "We are Modus" - An official video from Modus Furniture International, showcasing the brand's philosophy and product range. This video provides a general overview of the brand's quality and style, relevant to understanding the product's context.