Product Overview
The Rev-A-Shelf 4WBDP18-25 is a wood door-mount organizer designed to enhance storage and organization within your base cabinet. This unit features durable maple wood construction with a clear coat finish, ensuring longevity and a consistent aesthetic with various cabinet interiors. It includes adjustable shelves and door-mount brackets for flexible installation and customization.
The organizer is intended for cabinet floor/side mounting and provides convenient access to stored items by attaching directly to your cabinet door.
Image: The Rev-A-Shelf Wood Base Cabinet Door Mount Organizer shown installed inside a kitchen cabinet, providing organized storage for various items.
Setup and Installation
This product requires assembly and installation. Please follow these general guidelines. Specific instructions may vary based on your cabinet type and dimensions. Always ensure the cabinet door can fully close after installation.
1. Measure Your Cabinet Opening
Before installation, accurately measure the minimum cabinet opening (MCO) to ensure proper fit. Consider both framed and frameless cabinet types.
- Width (W): Measure the horizontal distance of the opening.
- Depth (D): Measure the distance from the front edge to the back of the cabinet.
- Height (H): Measure the vertical distance of the opening.
Check for any obstructions such as door hinges or plumbing that might interfere with the organizer's operation.
Image: A diagram detailing how to measure the minimum cabinet opening (MCO) for both framed and frameless cabinet styles, highlighting width, depth, and height.
2. Assemble the Organizer
Follow the included hardware instructions to assemble the wood door-mount pantry unit. This typically involves attaching the shelves to the main frame.
3. Mount to Cabinet Door
The adjustable door-mount brackets are essential for operation. Attach these brackets to the cabinet door according to the provided instructions. Ensure they are level and securely fastened.
4. Secure to Cabinet Floor/Side
The organizer is designed for cabinet floor/side mounting. Secure the base of the organizer to the cabinet floor or side using the appropriate hardware. Verify that the unit is stable and aligned with the cabinet door.
Operating Instructions
Once installed, the Rev-A-Shelf door-mount organizer provides accessible storage. Simply open your cabinet door to reveal the contents of the organizer.
Adjusting Shelves
The shelves are adjustable, allowing you to customize the storage space to fit various item heights. To adjust a shelf:
- Empty the shelf of its contents.
- Carefully lift or slide the shelf to disengage it from its current position.
- Reposition the shelf at the desired height, ensuring it is securely seated in the new supports.
Avoid overloading the shelves to maintain stability and prevent damage to the unit or cabinet door.
Care and Maintenance
Proper care and maintenance will ensure the longevity and optimal performance of your Rev-A-Shelf organizer. Perform the following tasks as needed.
Image: A graphic outlining the recommended care and maintenance procedures for Rev-A-Shelf products, including cleaning, adjustment, and lubrication.
Wipe Clean
Periodically clean your organizer to remove dust and spills. Use handwashing with soap and water, then wipe dry promptly. Avoid abrasive cleaners, bleach, or strong chemicals, as these can damage the wood finish or metal components.
Adjust
If any brackets or screws become loose over time due to normal use, simply tighten them. This maintains the stability and functionality of the organizer.
Grease
While the product is designed for smooth operation, if it utilizes a slide system, you may apply a good quality multi-purpose grease if needed. Avoid using spray lubricants, as they can degrade the grease over time.
Troubleshooting
This section addresses common issues you might encounter with your door-mount organizer.
Organizer Not Closing Properly
- Check for Obstructions: Ensure no items on the shelves are protruding and preventing the cabinet door from closing fully.
- Verify Installation: Re-check that the door-mount brackets and the organizer's base are securely fastened and correctly aligned. Loose fittings can cause misalignment.
- Cabinet Squareness: Ensure your cabinet itself is square and plumb, as an uneven cabinet can affect door closure.
Shelves Feel Loose or Unstable
- Secure Shelf Placement: Ensure each shelf is fully seated in its support clips or grooves.
- Tighten Fasteners: Check all screws and bolts connecting the shelves and frame, tightening any that are loose.
- Weight Distribution: Distribute items evenly on shelves and avoid placing excessively heavy items on upper shelves.
Specifications
| Feature | Detail |
|---|---|
| Model Name | Wood Base Cabinet Door Mount Organizer |
| Model Number | 4WBDP18-25 |
| Brand | Rev-A-Shelf |
| Product Dimensions | 4"D x 12"W x 25"H |
| Material | Maple Wood (Maple Veneer) |
| Finish Type | Clear Polyurethane |
| Number of Shelves | 4 |
| Mounting Type | Cabinet Floor/Side Mounted |
| Assembly Required | Yes |
| Item Weight | 9.9 Pounds |
| Included Components | (1) Wood Door-Mount pantry and mounting hardware |
Warranty Information
Specific warranty details for the Rev-A-Shelf 4WBDP18-25 Wood Base Cabinet Door Mount Organizer are not provided in this manual. For information regarding product warranty, please contact Rev-A-Shelf customer service directly or refer to the official Rev-A-Shelf website.
Customer Support
If you have any questions, concerns, or require assistance with your Rev-A-Shelf product, please contact customer service:
- Phone: 1-800-626-1126
- Email: INFO@REV-A-SHELF.COM
You can also visit the official Rev-A-Shelf website for additional product information and support resources.
Official Product Videos
No official product videos from the seller were found for this item in the provided data.
