1. Introduction
This manual provides detailed instructions for the safe and effective use of your HealthSense Ultra-Lite PS 126 Digital Weighing Scale. Please read this manual thoroughly before operation and retain it for future reference.
Image: HealthSense Ultra-Lite PS 126 Digital Weighing Scale. This image shows the sleek, grey design of the scale with its digital display.
Image: HealthSense Body Weighing Scale Ultra-Lite PS 126. This graphic highlights the product name and model number.
2. Product Features
- Stylish Design: Surface Area Dimension: 30 x 30 cm. Horizontally striped glass design on jet grey/black wide platform with curved edges.
- Skid-Proof Surface: Designed for enhanced safety and grip.
- Large LCD Display: Features a blue back-lit LCD display for clear readings, including room temperature.
- Step-On Technology: Provides instant readings upon stepping on the scale.
- Wide Weigh Range: Supports weights from 5 kg to 180 kg.
- Error & Overload Indicators: Alerts for low battery ('LO') and exceeding maximum capacity ('Err').
- Auto OFF: Automatically turns off to conserve battery life.
- High Precision Sensors: Equipped with 4 high precision G sensors for accurate measurements.
- Durable Material: Crafted from strong ABS plastic.
Image: Primary Features of HealthSense Weighing Scale. This graphic illustrates key features such as Step-on Technology, Error & Overload Indicators, 2x AAA Batteries Provided, Weigh Range, and Auto OFF.
Image: Four High Precision Sensors. This image highlights the advanced sensor technology used for accurate weight measurement.
3. Setup
3.1 Battery Installation
Your HealthSense Ultra-Lite PS 126 scale comes with 2 x AAA batteries included. To install:
- Locate the battery compartment on the underside of the scale.
- Open the battery compartment cover.
- Insert the 2 AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
3.2 Initial Calibration and Placement
For the most accurate results, proper placement and initial calibration are crucial:
- Place the scale on a hard, flat, and stable surface. Avoid carpets or uneven flooring, as this can affect accuracy.
- To initialize the scale, gently press one foot on the scale until the screen lights up.
- Remove your foot as the display returns to zero (0.0). The scale is now calibrated and ready for use.
- Always ignore the first reading for calibration if the scale has been moved. Re-initialize it each time it is relocated.
Image: Quick and Simple Setup. This image demonstrates the ease of use, showing a person stepping onto the scale.
4. Operating Instructions
4.1 Taking a Measurement
The HealthSense Ultra-Lite PS 126 uses step-on technology for quick measurements:
- Ensure the scale is on a hard, flat surface.
- Gently step onto the center of the scale with bare feet.
- Stand still until your weight is displayed and stabilizes on the LCD screen.
- The scale will automatically turn off after a few seconds of inactivity to save power.
Image: Accurate & Consistent Weighing. This image shows a foot on the scale, demonstrating the step-on feature and digital display.
4.2 Changing Measurement Units
The scale can display weight in kilograms (Kg), pounds (Lb), or stones (St:Lb). The unit switch is located in the battery compartment:
- Open the battery compartment cover on the underside of the scale.
- Locate the small switch inside the compartment.
- Toggle the switch to select your desired unit (Kg, Lb, or St:Lb).
- Close the battery compartment cover.
Image: Measurement Units. This graphic displays the available measurement units: Kilograms (Kg), Pounds (Lb), and Stones (St).
4.3 Tips for Accurate Readings
- Weigh yourself at a consistent time each day, ideally in the early morning on an empty stomach after your morning routine.
- Always place the scale on a hard, flat surface.
- Stand still and centered on the scale.
- Avoid weighing immediately after heavy meals or intense exercise.
5. Maintenance
5.1 Cleaning
To clean your HealthSense weighing scale:
- Wipe the surface with a soft, damp cloth.
- Do not use abrasive cleaners or immerse the scale in water.
- Keep the scale dry.
5.2 Battery Replacement
When the display shows 'LO', it indicates that the batteries are low and need to be replaced. Follow the battery installation steps in Section 3.1 to replace the batteries.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display shows 'LO' | Low battery | Replace the 2 AAA batteries. |
| Display shows 'Err' | Overload (weight exceeds 180 kg) | Reduce the weight on the scale. The maximum capacity is 180 kg. |
| Inaccurate or inconsistent readings | Scale not on a hard, flat surface; not initialized; first reading after moving. | Ensure scale is on a hard, flat surface. Initialize the scale by stepping on and off until it shows 0.0. Ignore the first reading after moving the scale. |
| No display | Batteries incorrectly installed or dead. | Check battery polarity. Replace batteries if necessary. |
Image: Instant Indicator. This graphic shows the 'LO' and 'Err' indicators on the scale's display, signifying low battery and overload respectively.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | HealthSense |
| Model Number | PS126 |
| Colour | Grey |
| Weight Limit | 5 to 180 Kilograms |
| Display Type | LCD with Backlight |
| Material | ABS Plastic |
| Item Weight | 1.12 kg (1120 Grams) |
| Product Dimensions (LxWxH) | 31 x 31 x 3.3 cm |
| Batteries | 2 x AAA batteries (included) |
| Country of Origin | China |
| Included Components | Weighing Scale, 2 x AAA batteries, User Manual, Warranty Card |
Image: Display Features. This image highlights the large LCD display, room temperature indication, and unit conversion options (Kg/Lb/St).
Image: Design Features. This graphic illustrates the unique wavy design, skid-proof surface, rounded corners, and strong ABS material of the scale.
8. Warranty and Support
8.1 Warranty Information
Your HealthSense Ultra-Lite PS 126 Digital Weighing Scale comes with a 1-year HealthSense India offsite service warranty on manufacturing defects. This warranty ensures timely customer support for any issues arising from manufacturing defects.
8.2 Customer Support
For any queries, assistance, or warranty claims, please reach out to HealthSense customer support:
- Helpline: 9856985636
- Email: support@healthsense.in
- Importer: YS Brands Pvt Ltd, No.6, 11th Cross, 2nd Stage, West of Chord Road, Bangalore-560086
