Fat Shark 3.93/10cm 2-Pin to 2-Pin Molex TX Power Cable User Manual

1. Introduction

This manual provides essential information for the proper use and care of your Fat Shark 3.93/10cm (10cm) 2-Pin to 2-Pin Molex TX Power Cable. This cable is designed to provide power connectivity for various Fat Shark components, typically used in RC (Radio Control) applications for transmitter (TX) power. It features a JST female battery connector on one end and a 2-pin Molex connector on the other.

2. Product Overview

Image 2.1: The Fat Shark 2-Pin to 2-Pin Molex TX Power Cable. This image shows the cable's overall length and the two distinct connector types: a JST female battery connector (red housing) and a 2-pin Molex connector (black housing). The cable consists of red and black wires indicating polarity.

Image 2.2: The Fat Shark Power Cable as it appears in its retail packaging. The packaging features the 'FAT SHARK RC VISION SYSTEMS' logo and provides a clear view of the cable inside.

The cable is approximately 10cm (3.93 inches) in length, providing a compact solution for power connections. It is designed for specific applications requiring a JST female to 2-pin Molex connection.

3. Setup and Connection

1. Identify Connectors: Locate the JST female battery connector (typically red housing) and the 2-pin Molex connector (typically black housing) on the cable.
2. Connect to Power Source: Plug the JST female battery connector into a compatible JST male connector on your power source (e.g., a battery pack). Ensure the polarity (red wire to positive, black wire to negative) is correct to prevent damage to your equipment.
3. Connect to Device: Plug the 2-pin Molex connector into the corresponding 2-pin Molex port on your Fat Shark device or other compatible equipment. Verify a secure and firm connection.
4. Verify Connection: After connecting both ends, gently tug on the connectors to ensure they are seated properly and will not accidentally disconnect during operation.

Important: Always ensure correct polarity when connecting power cables to avoid damage to your devices. Refer to your device's manual for specific power input requirements.

4. Operating Instructions

This cable functions as a passive power conduit. Once properly connected between a power source and a compatible device, it facilitates the transfer of electrical power. There are no active operational controls on the cable itself.

• Ensure the power source is switched on (if applicable) after all connections are made.
• Monitor your device for proper function and power indication.

5. Maintenance and Care

• Storage: Store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid kinking or tightly coiling the cable, which can damage the internal wires.
• Cleaning: If necessary, gently wipe the cable and connectors with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Inspection: Periodically inspect the cable for any signs of wear, fraying, cuts, or damage to the connectors. Discontinue use if any damage is observed.
• Handling: Always grasp the connectors when plugging or unplugging the cable, rather than pulling on the wire itself, to prevent strain and damage.

6. Troubleshooting

If you experience issues with power delivery, consider the following:

• No Power to Device:
  • Ensure both the JST and Molex connectors are fully seated and secure.
  • Verify that the power source (e.g., battery) is charged and functioning correctly.
  • Check the polarity of the connections. Incorrect polarity can prevent power flow or damage components.
  • Inspect the cable for any visible damage (cuts, breaks, bent pins). If damaged, replace the cable.
• Intermittent Power:
  • This often indicates a loose connection. Re-seat both connectors firmly.
  • Check for any internal wire damage by gently flexing the cable. If suspected, replace the cable.

If troubleshooting steps do not resolve the issue, contact Fat Shark RC support or your retailer for further assistance.

7. Specifications

8. Warranty and Support

For warranty information and technical support, please refer to the official Fat Shark RC website or contact your authorized retailer. Keep your proof of purchase for any warranty claims.

• Manufacturer Website: www.fatshark.com
• Retailer Support: Contact the seller from whom you purchased the product for immediate assistance.