Italeri Road Signs II 1/35 Model Kit Instruction Manual

Introduction

This instruction manual provides detailed guidance for assembling and finishing your Italeri Road Signs II 1/35 Model Kit. This kit allows you to create realistic road signs and accessories from the World War II era, perfect for dioramas and historical displays. Please read all instructions carefully before beginning assembly.

Product Overview

The Italeri Road Signs II kit (Model 510006527) is a 1:35 scale model designed to complement military vehicle dioramas. It includes 29 pieces for various road signs and signposts, along with a decal sheet containing 20 individual decals for authentic detailing.

Image showing the packaging of the Italeri Road Signs II 1/35 Model Kit, featuring various road signs and accessories.

Safety Information

• This product is a model kit and not a toy. It contains small parts and is recommended for ages 14 and up (Manufacturer Minimum Age: 168 months).
• Always use modeling tools, glues, and paints in a well-ventilated area.
• Keep all components and tools out of reach of small children to prevent choking hazards or injury.
• Exercise caution when using sharp tools such as hobby knives and clippers.
• Refer to the safety instructions provided with any adhesives or paints used.

Package Contents

Your Italeri Road Signs II 1/35 Model Kit should contain the following:

• Plastic sprues with 29 model parts for road signs and accessories.
• One decal sheet with 20 individual decals.
• Instruction leaflet (this document).

Note: Glue, paints, and modeling tools are not included and must be purchased separately.

Setup and Assembly

Assembly is required for this model kit. Follow these general steps:

1. Preparation: Carefully remove all parts from the sprues using a hobby knife or clippers. Clean any excess plastic (flash) from the parts using a hobby knife or fine sandpaper.
2. Dry Fit: Before applying glue, dry fit parts together to ensure proper alignment and fit.
3. Assembly: Apply a small amount of plastic model cement to the joining surfaces and press parts together firmly. Hold in place until the glue sets. Refer to the included diagram for specific part placement.
4. Decal Application: Once the model is assembled and painted (if desired), apply the decals. Cut out the desired decal, dip it in warm water for a few seconds, then slide it onto the model. Position it carefully and gently blot away excess water with a soft cloth.

The kit includes various road signs and signposts. The decal sheet provides corresponding numbers to match decals with specific sign boards. Refer to the decal sheet for guidance on which decal applies to which sign.

Painting and Finishing

For a realistic finish, painting is recommended. The manufacturer suggests the following acrylic paints:

• Acrylic Paint 4673AP: Flat Wood
• Acrylic Paint 4675AP: Flat Rust
• Acrylic Paint 4679AP: Flat Steel

Apply paint in thin, even coats. Allow each coat to dry completely before applying the next. Use appropriate primers and clear coats for best results and protection.

Maintenance

Once assembled and finished, your model requires minimal maintenance:

• Cleaning: Dust the model regularly with a soft, dry brush or a gentle air blower. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures to prevent warping or fading of paint and decals.
• Handling: Handle the model carefully to avoid breaking delicate parts.

Troubleshooting

Common issues and solutions during model kit assembly:

• Parts not fitting: Ensure all flash is removed. Lightly sand the joining surfaces if necessary. Do not force parts.
• Decals not adhering: Ensure the surface is clean and smooth. Use a decal setting solution to help decals conform to irregular surfaces and adhere better.
• Paint issues (e.g., brush strokes, uneven finish): Apply paint in thin coats. Ensure paint is properly thinned. Allow adequate drying time between coats.

Specifications

Warranty and Support

Italeri model kits are manufactured to high standards. For questions regarding missing parts or manufacturing defects, please contact your retailer or Italeri customer support directly. Specific warranty details may vary by region and retailer.

For further assistance, please visit the official Italeri website or contact your local distributor.