Golmar T-1772VD

Golmar T-1772VD Telephone

User Manual

1. Introduction

Thank you for choosing the Golmar T-1772VD telephone. This manual provides essential information for the proper installation, operation, and maintenance of your device. Please read these instructions carefully before use to ensure optimal performance and safety.

Golmar T-1772VD telephone unit, white, with a coiled handset cord and keypad.

Figure 1: Golmar T-1772VD Telephone Unit

2. Safety Information

Ensure the power source matches the requirements specified for your audio kit system.
Do not expose the telephone to water or excessive humidity.
Avoid placing the device near heat sources or in direct sunlight.
Do not attempt to open or repair the unit yourself. Refer all servicing to qualified personnel.
Keep out of reach of children.

3. Package Contents

Please check the package for the following items:

1 x Golmar T-1772VD Telephone Unit
1 x Handset Cord (detachable)
1 x Wall Mounting Bracket
1 x Screw Kit for Wall Mounting
1 x User Manual (this document)

4. Setup and Installation

The Golmar T-1772VD is designed as an extra telephone for a 2-wire audio kit system (e.g., AS-1220sii). Follow these steps for proper installation:

4.1 Wall Mounting

Choose a suitable location on a wall, ensuring it is within reach of the existing 2-wire audio kit wiring.
Use the wall mounting bracket as a template to mark the drilling points. The bracket features multiple fixing points for flexibility.
Drill holes at the marked positions and insert appropriate wall plugs (if necessary).
Secure the wall mounting bracket to the wall using the provided screws.

4.2 Wiring Connection

Important: Ensure the main audio kit system is powered off before making any electrical connections.

Locate the 2-wire connection terminals on the back of the T-1772VD telephone unit.
Connect the 2-wire cable from your audio kit system to the corresponding terminals on the telephone unit. Refer to your main audio kit manual for specific wiring diagrams if needed.
Once the wiring is secure, carefully attach the T-1772VD telephone unit to the mounted bracket.
Connect the detachable handset cord to the designated port on the telephone unit and to the handset.
Restore power to the main audio kit system.

5. Operating Instructions

5.1 Receiving a Call

When the telephone rings, lift the handset to answer the call.
To end the call, replace the handset on the cradle.

5.2 Making an Intercom Call (if supported by your audio kit system)

The T-1772VD features a single keypad. The method for making an intercom call depends on your specific Golmar audio kit system. Typically, you would:

Lift the handset.
Dial the internal extension number of the desired recipient.
Wait for the recipient to answer.
Replace the handset to end the call.

Refer to your main audio kit system's manual for detailed instructions on internal calling features.

5.3 Door Release Function (if supported by your audio kit system)

If your audio kit system includes a door release function, there will typically be a dedicated button on the T-1772VD telephone unit. This button is usually marked with a key symbol.

During an active call with an outdoor panel, press the door release button to unlock the door.
The door will remain unlocked for a short period, as configured in your main system.

Consult your main audio kit system's manual for specific details on the door release operation.

6. Maintenance and Care

Cleaning: Use a soft, dry cloth to clean the exterior of the telephone. Do not use abrasive cleaners, solvents, or strong detergents, as these can damage the plastic housing.
Dust: Regularly wipe away dust from the keypad and handset to prevent accumulation that could affect performance.
Environment: Ensure the telephone is kept in a dry environment, away from direct sunlight and extreme temperatures.

7. Troubleshooting

Problem	Possible Cause	Solution
No dial tone / No sound	Loose wiring connection. Main audio kit system is off or faulty. Handset cord is not properly connected.	Check all wiring connections to the telephone unit and the main audio kit. Verify the main audio kit system is powered on and functioning correctly. Ensure the handset cord is securely plugged into both the handset and the telephone unit.
Cannot hear caller / Caller cannot hear me	Handset cord issue. Faulty handset. Volume settings on main audio kit.	Try re-seating the handset cord. Test with another compatible handset if available. Check volume settings on the main audio kit system.
Door release not working	Not during an active call. Main audio kit system fault. Door strike/lock issue.	Ensure you are in an active conversation with the outdoor panel. Consult the main audio kit system manual for troubleshooting door release. Check the physical door strike/lock mechanism.

If the problem persists after trying these solutions, please contact Golmar customer support or your installer.

8. Specifications

Brand	Golmar
Model Number	T-1772VD
Manufacturer	Golmar Sistemas de Comunicación S.A.
Product Dimensions (W x H x D)	88 x 235 x 56 mm
Weight	Approximately 340 g (based on package weight)
Color	White
Telephone Type	Wired
Material	Acrylonitrile Butadiene Styrene (ABS)
Power Source	Corded Electric (via audio kit system)
Dialer Type	Single Keypad
Answering System Type	Digital (System Dependent)
Compatible Devices	Wired devices (specifically 2-wire audio kit systems like AS-1220sii)
Multi-line Operation	Supports multiple lines (System Dependent)
Caller ID	No

9. Warranty and Support

Golmar products are manufactured to high-quality standards. For information regarding the warranty period and terms, please refer to the warranty card included with your original audio kit system or contact your local Golmar distributor.

For technical support, service, or spare parts, please contact your authorized Golmar dealer or visit the official Golmar website for contact information.