Introduction
Welcome to the user manual for your new Swiss Military Hanowa Chronograph Watch. This guide provides detailed instructions on how to set up, operate, and maintain your timepiece, ensuring its longevity and optimal performance. Please read this manual carefully before using your watch.
Components Overview
Familiarize yourself with the key components of your Swiss Military Hanowa Chronograph Watch:
Image: Front view of the Swiss Military Hanowa Chronograph Watch, showcasing its brown dial, three sub-dials, date window, and stainless steel bracelet.
- Crown: Used for setting the time and date.
- Pushers (A & B): Used to operate the chronograph functions (start, stop, reset).
- Main Hands: Hour, minute, and second hands for basic timekeeping.
- Sub-dials: Display chronograph minutes, seconds, and 24-hour time (or other functions depending on the movement).
- Date Window: Displays the current date.
- Stainless Steel Bracelet: Durable and adjustable for comfortable wear.
Initial Setup
Setting the Time
- Pull the crown out to position 2 (the outermost position). The second hand will stop.
- Turn the crown clockwise or counter-clockwise to set the hour and minute hands to the desired time. Ensure you set the correct AM/PM time if your watch has a 24-hour indicator or date change mechanism.
- Push the crown back into position 0 (normal operating position). The second hand will resume movement.
Setting the Date
- Pull the crown out to position 1 (the first click).
- Turn the crown clockwise to set the date. Do not set the date between 9 PM and 3 AM, as this may damage the movement. If the current time falls within this period, adjust the time outside this range first, set the date, and then reset the time.
- Once the date is set, push the crown back into position 0.
Adjusting the Bracelet
The stainless steel bracelet can be adjusted for a comfortable fit. It is recommended to have the bracelet adjusted by a professional watchmaker or jeweler to avoid damaging the links or pins.
Operating Instructions
Basic Timekeeping
Your watch continuously displays the current time (hours, minutes, seconds) once the time is set and the crown is in position 0. The quartz movement ensures accurate timekeeping.
Using the Chronograph Function
The chronograph allows you to measure elapsed time independently of the main time display.
- Start: Press pusher A (top pusher) to start the chronograph. The chronograph second hand will begin to move.
- Stop: Press pusher A again to stop the chronograph. The elapsed time will be indicated by the chronograph hands on the sub-dials.
- Reset: After stopping the chronograph, press pusher B (bottom pusher) to reset all chronograph hands to their zero positions.
- Intermediate Time (Split Time): Some chronograph models allow for split time measurement. Consult a watch specialist if you require this advanced function.
Care and Maintenance
Cleaning
To maintain the appearance of your watch, wipe it regularly with a soft, dry cloth. For the stainless steel bracelet, a slightly damp cloth can be used, followed by a dry one. Avoid using harsh chemicals or abrasive materials.
Water Resistance
Your watch has a water resistance rating of 10 ATM (100 meters / 330 feet). This means it is suitable for swimming, snorkeling, and showering. However, it is not suitable for high-impact water sports or diving. Always ensure the crown is fully pushed in before any contact with water. Do not operate the pushers or crown while the watch is wet or submerged.
Battery Replacement
Your quartz watch is powered by a battery. When the battery runs low, the second hand may start to jump every few seconds (End-of-Life indicator). It is recommended to have the battery replaced by an authorized service center or a qualified watchmaker to ensure the water resistance is maintained and to prevent damage to the movement.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch stops or runs intermittently. | Low battery. | Replace the battery at an authorized service center. |
| Date changes at noon instead of midnight. | AM/PM setting is incorrect. | Advance the time by 12 hours. |
| Chronograph hands do not reset to zero. | Requires calibration or service. | Consult an authorized service center. |
| Condensation inside the crystal. | Water ingress or extreme temperature change. | Immediately take the watch to an authorized service center. |
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | 06-5115-04-005 (Internal Ref: 7612657083249) |
| Movement | Quartz |
| Case Material | Stainless Steel |
| Bracelet Material | Stainless Steel |
| Water Resistance | 10 ATM (100 meters / 330 feet) |
| Functions | Chronograph, Date, Hour, Minute, Second |
| Approx. Dimensions (Package) | 93.98 x 43.18 x 43.18 cm |
| Approx. Weight (Package) | 160 grams |
Warranty and Support
Your Swiss Military Hanowa watch is manufactured to high standards and comes with a limited warranty against manufacturing defects. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details.
For service, repairs, or any inquiries not covered in this manual, please contact an authorized Swiss Military Hanowa service center or the retailer from whom you purchased the watch. Using unauthorized service providers may void your warranty.
