1. Product Overview
LPS 1 Greaseless Lubricant is specially formulated to penetrate minute crevices, displace moisture, and leave behind a thin, dry lubricating film. It is the top choice for drying out critical electrical/electronic components and lubricating precision instruments.
Image 1.1: Front view of the LPS 1 Greaseless Lubricant aerosol can. The label displays the product name, key features in English and Spanish, and safety warnings.
Key Features:
- Provides a dry, thin, lubricating film.
- Resists oil, dust, and dirt build-up.
- Removes carbon build-up from surfaces.
- Displaces moisture.
- Loosens rusted or frozen parts.
2. Safety Information
WARNING: Read and understand all safety information before using this product. Failure to do so may result in serious injury or property damage.
- DANGER: FLAMMABLE. CONTENTS UNDER PRESSURE.
- WARNING: HARMFUL OR FATAL IF SWALLOWED.
- READ WARNINGS ON BACK PANEL before use.
- Keep out of reach of children.
- Use in a well-ventilated area.
- Do not puncture or incinerate container.
- Do not expose to heat or store at temperatures above 120°F (49°C).
For detailed safety data sheets (SDS), please refer to the manufacturer's website or contact customer support.
3. Setup and Preparation
- Ventilation: Ensure the work area is well-ventilated to prevent accumulation of vapors.
- Surface Preparation: For best results, clean the surface to be treated of any loose dirt, grease, or debris.
- Shake Can: Shake the aerosol can thoroughly for several seconds before use to ensure proper mixing of contents.
- Test Application: If unsure about material compatibility, test the lubricant on an inconspicuous area first.
4. Operating Instructions
Follow these steps for effective application of LPS 1 Greaseless Lubricant:
- Aim Nozzle: Point the spray nozzle directly at the area requiring lubrication or moisture displacement.
- Spray Application: Press the actuator button to release a fine mist. Apply a thin, even coat. Avoid over-application.
- Penetration: Allow the product a few moments to penetrate minute crevices and displace moisture.
- Drying: The lubricant will dry to a thin, greaseless film. No wiping is typically required unless excess product is present.
- Electrical Components: When used on electrical components, ensure power is off before application and allow sufficient drying time before re-energizing.
For specific applications, consult relevant equipment manuals or contact LPS technical support.
5. Maintenance and Storage
Product Storage:
- Store in a cool, dry, well-ventilated area.
- Keep away from direct sunlight, heat sources, and open flames.
- Do not store at temperatures above 120°F (49°C).
- Keep container tightly closed when not in use.
Container Disposal:
Dispose of empty containers in accordance with local, state, and federal regulations. Do not puncture or incinerate empty cans.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No spray or weak spray | Clogged nozzle; low pressure | Clean nozzle with a thin wire; shake can thoroughly; ensure can is not empty. |
| Lubricant not drying properly | Over-application; poor ventilation | Apply a thinner coat; ensure adequate ventilation in the work area. |
| Surface still appears wet/oily | Not enough drying time; contamination | Allow more time for the product to dry; ensure surface was clean before application. |
7. Product Specifications
| Attribute | Detail |
|---|---|
| Brand | LPS |
| Item Model Number | 00116 |
| Package Information | Can |
| Net Contents | 11 wt. oz. / 379 ml |
| Item Weight | 11 Ounces |
| Recommended Uses | Electrical components, precision instruments |
| Manufacturer | LPS Laboratories |
| Date First Available | October 10, 2009 |
8. Warranty Information
Specific warranty information for LPS 1 Greaseless Lubricant is not provided in the product details. Please refer to the official LPS Laboratories website or contact their customer service for details regarding product warranties and guarantees.
9. Customer Support
For technical assistance, product inquiries, or safety data sheets (SDS), please contact LPS Laboratories directly.
- Manufacturer: LPS Laboratories
- Website: www.lpslabs.com (Example link, actual link not provided in input)
- Contact Information: Refer to the manufacturer's official website for current contact details.