Philips DSP 470U

Philips DSP 470U Speakers User Manual

Model: DSP 470U

1. Introduction

Thank you for purchasing the Philips DSP 470U Soundbar Speakers. This manual provides essential information for the safe and efficient operation of your new audio system. Please read this manual thoroughly before using the product and retain it for future reference.

Philips DSP 470U Soundbar and Subwoofer

Figure 1: Philips DSP 470U Soundbar and Subwoofer. The image displays the main soundbar unit on the left and the separate subwoofer unit on the right, both in black finish.

2. Package Contents

Ensure all items are present in the package:

3. Setup

3.1 Placement

3.2 Connections

  1. Connect the subwoofer to the soundbar unit using the dedicated audio cable.
  2. Connect the soundbar to your audio source (e.g., TV, MP3 player, smartphone, tablet, laptop) using the provided 3.5mm auxiliary cable. Insert one end into the 'AUX IN' port on the soundbar and the other end into the audio output port of your device.
  3. For USB playback, insert a USB drive into the USB port on the soundbar.
  4. Connect the power cable to the soundbar unit and then plug it into a standard AC power outlet.

4. Operating Instructions

4.1 Power On/Off

Press the 'Power' button on the remote control or the main unit to turn the speakers on or off.

4.2 Input Source Selection

Use the 'Source' or 'Input' button on the remote control or the main unit to cycle through available input modes: AUX, USB, FM Radio, and Bluetooth.

4.3 Volume Control

Adjust the volume using the 'Volume +' and 'Volume -' buttons on the remote control or the main unit.

4.4 FM Radio Operation

4.5 Bluetooth Pairing

To connect a Bluetooth device:

  1. Switch the speaker system to Bluetooth mode. The display will indicate 'BT' or 'Pairing'.
  2. Enable Bluetooth on your mobile device (smartphone, tablet, etc.).
  3. Search for 'Philips DSP 470U' in the list of available devices and select it to pair.
  4. Once paired, audio from your device will play through the speakers.

5. Maintenance

6. Troubleshooting

ProblemPossible CauseSolution
No powerPower cable not connected; Power outlet not activeEnsure power cable is securely connected; Try a different power outlet
No soundIncorrect input source; Volume too low; Cables not connected properlySelect correct input source; Increase volume; Check all audio cable connections
Remote control not workingBatteries depleted; Obstruction between remote and unitReplace batteries; Remove any obstructions; Ensure remote is pointed at the unit's sensor
Bluetooth pairing issuesDevice too far; Bluetooth not enabled on source; Speakers not in pairing modeMove device closer; Enable Bluetooth on source device; Ensure speakers are in Bluetooth pairing mode

7. Specifications

FeatureDetail
Model NameDSP 470U
Speaker TypeSoundbar, Satellite, Woofer
Channel Configuration2.0 Channel
System Output (PMPO)3000W
Woofer Size5.25 inches
Satellite Speaker Size3 inches
Tweeter Diameter1 inch
ConnectivityWired (3.5mm Auxiliary, USB), Wireless (Bluetooth)
Special FeaturesFM Radio, Display, Remote Control, Subwoofer
Compatible DevicesLaptop, MP3 Player, Smartphone, Tablet, Television
Control MethodRemote
Power SourceAC
Item Weight4.37 kg (approx.)
Package Dimensions75.6 x 16 x 14.4 cm
Mounting TypeTabletop Mount

8. Warranty and Support

Philips products are designed and manufactured to the highest standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Philips support website. For technical assistance or customer service, please contact Philips customer support through their official channels.

You can find more information and support at the Philips Store on Amazon.