Instapak Quick RT Expandable Foam Bags User Manual

1. Introduction

The Instapak Quick RT Expandable Foam Bags are designed to provide on-demand, custom-fit protective packaging for a wide range of products. These bags expand to form a protective cushion around your items, ensuring safe transit and minimizing damage. This manual provides essential instructions for the safe and effective use of your Instapak Quick RT bags.

2. Safety Information

Always prioritize safety when handling packaging materials. Please observe the following precautions:

Eye Protection: Always wear safety glasses with side shields when activating Instapak Quick RT packaging. This protects against potential splashes or contact with the foam components.
Skin Protection: Avoid prolonged skin contact with the liquid components before activation. In case of contact, wash thoroughly with soap and water.
Ventilation: Use in a well-ventilated area.
Storage: Store bags in a cool, dry place away from direct sunlight and extreme temperatures.
Disposal: Dispose of used bags according to local regulations for plastic and foam waste.

For detailed safety data sheets (SDS), please refer to the manufacturer's official website or contact their support.

3. Setup

Instapak Quick RT bags are designed for immediate use. No special equipment or power supply is required for setup.

Prepare Work Area: Ensure your work surface is clean, flat, and free of sharp objects that could puncture the bag.
Select Bag Size: Choose an Instapak Quick RT bag size appropriate for the item you are packaging. The product featured in this manual is the 22 x 27 inch size.
Inspect Bag: Before activation, visually inspect the bag for any signs of damage or leaks. Do not use a damaged bag.

4. Operating Instructions

Follow these steps to activate and use your Instapak Quick RT Expandable Foam Bag:

Locate Components: Identify Component "A" and Component "B" within the bag. These are typically marked on the bag's surface.
Activate Component "A": Firmly press down on Component "A" to break the internal seal.
Activate Component "B": Firmly press down on Component "B" to break its internal seal.
Mix Components: Immediately after activating both components, gently mix the contents by kneading the bag for a few seconds. Do not shake vigorously.
Place Item: As the foam begins to expand, quickly place the item you wish to protect onto the expanding foam.
Form Cushion: Allow the foam to expand and conform around your product, creating a custom protective cushion. This process typically takes a few minutes.
Seal Package: Once the foam has fully expanded and solidified, you can place the cushioned item into your shipping box.

Instapak Quick RT Expandable Foam Bag, light blue, with activation instructions printed on its surface.

Figure 1: Instapak Quick RT Expandable Foam Bag ready for activation. The bag shows markings for "Component A" and "Component B" and instructions for activation.

Important: The foam will begin to expand immediately after activation. Work quickly and efficiently to ensure proper cushioning.

5. Maintenance

Instapak Quick RT bags are single-use products and require no ongoing maintenance. However, proper storage is crucial for maintaining their effectiveness before use.

Storage Conditions: Store unused bags in their original packaging in a cool, dry environment, ideally between 65°F and 75°F (18°C and 24°C).
Avoid Extremes: Do not expose bags to direct sunlight, freezing temperatures, or excessive heat, as this can affect the chemical components and reduce product performance.
Shelf Life: Refer to the product packaging for specific shelf life information. Using bags past their recommended shelf life may result in suboptimal foam expansion.

6. Troubleshooting

If you encounter issues with your Instapak Quick RT bags, consider the following common problems and solutions:

Problem	Possible Cause	Solution
Foam does not expand or expands poorly.	Components not fully activated. Improper mixing. Bag stored in incorrect temperature. Expired product.	Ensure both Component "A" and "B" seals are broken. Knead the bag thoroughly but gently immediately after activation. Ensure bags are stored within recommended temperature range. Check expiration date on packaging.
Foam is too hard or too soft.	Temperature of bag or environment. Mixing time.	Optimal performance at room temperature. Ensure quick and proper mixing.
Bag leaks after activation.	Bag was damaged prior to use. Excessive force during activation/mixing.	Inspect bags before use. Handle bags gently during activation and mixing.

If problems persist, please contact Instapak Quick customer support.

7. Specifications

Key specifications for the Instapak Quick RT Expandable Foam Bags (Model IQRT80):

Product Dimensions: 22 inches (Width) x 27 inches (Length)
Item Model Number: IQRT80
Brand: Instapak Quick
Manufacturer: Sealed Air
Material: Blend (Foam components)
Color: Multi (Typically light blue as shown in product images)
Item Weight (per bag, approximate): Varies by size, but the product listing indicates a total weight of 13.22 Pounds for a quantity of bags.

8. Official Product Videos

No official product videos from the seller were found for this specific model at this time. For visual demonstrations, please refer to the manufacturer's official website or authorized distributors.

9. Warranty and Support

For information regarding product warranty, returns, or technical support, please contact the manufacturer, Sealed Air, or your authorized Instapak Quick distributor directly. Details are typically provided with your purchase documentation or on the manufacturer's official website.

Manufacturer: Sealed Air

Website: www.instapakquick.com (as indicated on the product bag)

Instapak Quick IQRT80