Tvilum Portland 1 Drawer Wood Nightstand Instruction Manual

1. Product Overview

This manual provides instructions for the assembly, operation, and maintenance of your Tvilum Portland 1 Drawer Wood Nightstand. This contemporary nightstand features one drawer and an open shelf, designed for convenient bedside storage.

Image 1.1: The Tvilum Portland 1 Drawer Wood Nightstand in a bedroom environment, showcasing its design and functionality next to a bed.

2. Safety Information

Please read all safety instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Keep small parts away from children: Small components and hardware can be a choking hazard.
• Assemble on a soft, clean surface: This prevents scratching or damaging the furniture during assembly.
• Do not overload: Avoid placing excessive weight on the nightstand, drawer, or shelf to prevent tipping or structural damage.
• Use as intended: This product is designed as a nightstand for storage. Do not use it as a step stool or for purposes other than its intended use.
• Secure the product: If anti-tip hardware is included, it is strongly recommended to secure the nightstand to a wall to prevent tipping, especially in households with children.

3. Package Contents

Before beginning assembly, ensure all parts are present and undamaged. Refer to the included assembly manual for a detailed list of components and hardware.

• Assembly Manual
• Hardware and Fasteners (screws, dowels, cam locks, etc.)
• Plastic Glides
• Engineered Wood Panels for the nightstand frame, drawer, and shelf
• Drawer Knob

4. Setup and Assembly

Assembly of the Tvilum Portland Nightstand is required. It is recommended that one person performs the assembly.

4.1. Interactive Assembly with BILT App

For a revolutionary and interactive assembly experience, download the free BILT app. The app provides 3D animated instructions with voice and text guidance. Scan the QR code provided in your physical assembly manual or search for "Tvilum Portland Nightstand" within the BILT app.

4.2. General Assembly Guidelines

• Review the manual: Carefully read through the entire assembly manual before starting.
• Identify all parts: Match all components with the parts list in the manual.
• Use correct hardware: Ensure you use the specified hardware for each step.
• Do not overtighten: Overtightening screws can damage the engineered wood.
• Ensure proper alignment: Verify that all panels and components are correctly aligned before securing them.

Image 4.1: Detailed dimensional drawing of the nightstand, including front and side views with measurements in millimeters and inches, and an exploded view of the drawer assembly.

Image 4.2: Close-up of the drawer mechanism, showing the plastic glides for smooth operation. Ensure these are correctly installed during assembly.

5. Operating Instructions

The Tvilum Portland Nightstand is designed for convenient storage next to your bed or in other small spaces.

5.1. Drawer Usage

The single drawer operates on plastic glides, allowing for smooth opening and closing. To open, gently pull the pewter-colored knob. To close, push the drawer until it is fully recessed into the nightstand frame.

Image 5.1: The nightstand with its single drawer partially open, demonstrating its functionality and storage access.

5.2. Open Shelf Usage

The open shelf below the drawer provides additional storage space for books, magazines, or decorative items. Ensure items placed on the shelf do not protrude excessively to maintain stability.

Image 5.2: The nightstand displaying its open shelf with books, illustrating its practical storage capabilities.

6. Maintenance and Care

Proper care will help maintain the appearance and longevity of your nightstand.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
• Spills: Immediately wipe up any spills to prevent moisture damage to the engineered wood.
• Heat and Moisture: Avoid placing hot items directly on the surface. Use coasters under drinks to prevent rings and stains.
• Sunlight: Prolonged exposure to direct sunlight may cause fading or discoloration.
• Hardware: Periodically check and tighten all hardware to ensure stability.

7. Troubleshooting

If you encounter issues with your nightstand, refer to the following common solutions.

7.1. Drawer is Stiff or Does Not Slide Smoothly

• Check alignment: Ensure the drawer slides are correctly aligned and installed on both the drawer and the nightstand frame.
• Verify hardware: Confirm all screws securing the glides are properly tightened but not overtightened.
• Lubrication: A small amount of silicone spray or paraffin wax can be applied to the plastic glides to improve smoothness.
• Obstructions: Check for any debris or foreign objects obstructing the drawer's path.

7.2. Parts Do Not Fit Together

• Re-check instructions: Double-check the assembly manual or the BILT app to ensure each piece is oriented correctly. Engineered wood panels often have specific front/back or top/bottom orientations.
• Verify part numbers: Ensure you are using the correct parts for each step as indicated in the manual.
• Do not force: If parts do not fit easily, do not force them, as this can cause damage. Disassemble the last few steps and re-evaluate.

8. Product Specifications

9. Warranty and Support

9.1. Manufacturer Warranty

For information regarding the manufacturer's warranty, please refer to the product description on the store page where you purchased the item or visit the official Tvilum website.

9.2. Customer Support

If you require further assistance with assembly, missing parts, or product issues, please contact Tvilum customer support through their official website or the retailer from whom the product was purchased. The BILT app may also offer direct support options.