Blomus 68694 MENOTO Matte Double Towel Stand

1. Product Overview

The Blomus MENOTO Matte Double Towel Stand (Model 68694) is a freestanding bathroom accessory designed to hold and dry towels efficiently. Constructed from matte stainless steel with a heavy polystone base, it offers stability and a modern aesthetic. Its double-bar design allows for optimal air circulation, promoting quick and odor-free drying of towels.

Image 1.1: The Blomus MENOTO Matte Double Towel Stand, showcasing its design with a towel.

2. Setup and Assembly

The Blomus MENOTO Towel Stand requires minimal assembly. Please ensure all components are present before beginning.

2.1. Package Contents

• 1 x Heavy Polystone Base
• 2 x Vertical Stainless Steel Support Rods
• 2 x Horizontal Stainless Steel Towel Bars
• Assembly Hardware (screws, Allen key if required)

2.2. Assembly Instructions

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify that all listed components are present.
2. Attach Vertical Supports to Base: Position the heavy polystone base on a flat surface. Insert the bottom ends of the two vertical stainless steel support rods into the designated slots on the base. Secure them using the provided hardware (typically screws from the underside of the base).
3. Attach Horizontal Towel Bars: Align the horizontal towel bars with the top ends of the vertical support rods. The bars are designed to be staggered for optimal towel drying. Secure each bar to the vertical supports using the remaining hardware.
4. Verify Stability: Once assembled, gently shake the towel stand to ensure all connections are secure and the unit is stable. The heavy base is designed to prevent tipping.

Image 2.1: The Blomus MENOTO Towel Stand fully assembled, ready for use.

3. Operating Instructions

The Blomus MENOTO Towel Stand is designed for straightforward use in your bathroom or any suitable space.

3.1. Hanging Towels

• Utilize both horizontal bars to hang towels. The staggered design allows for multiple towels to be hung without overcrowding, facilitating air circulation.
• The stand can accommodate up to four hand towels or two bath towels, depending on their size.
• Spread towels evenly across the bars to maximize drying efficiency and maintain the stand's balance.

3.2. Placement

As a freestanding unit, the towel stand can be placed anywhere in the bathroom or other rooms where towel drying or storage is desired. Ensure it is placed on a level surface to maintain stability.

Image 3.1: The towel stand in a bathroom, demonstrating its practical use.

4. Maintenance and Care

Proper care will ensure the longevity and appearance of your Blomus MENOTO Towel Stand.

4.1. Cleaning Instructions

• To clean the stainless steel and polystone surfaces, simply wipe them with a soft, damp rag.
• Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the matte finish and material.
• For stubborn spots, a mild soap solution can be used, followed by wiping with a clean, damp cloth and then drying thoroughly.

4.2. General Care

• Regularly check all connections to ensure they remain tight. Tighten any loose screws as needed.
• Avoid exposing the stand to excessive moisture or standing water for prolonged periods, especially the polystone base.

5. Troubleshooting

This section addresses common concerns you might encounter with your towel stand.

5.1. Stability Issues

• Problem: The towel stand feels wobbly or unstable.
  Solution: Ensure the stand is placed on a completely flat and level surface. Check all assembly screws to confirm they are tightened securely. The heavy polystone base is designed for stability, so wobbling often indicates uneven placement or loose connections.

5.2. Towels Not Drying Properly

• Problem: Towels remain damp for extended periods.
  Solution: Ensure towels are spread out fully on the bars and not bunched up. The staggered design promotes air circulation; ensure sufficient space between towels. Improve bathroom ventilation if necessary.

6. Product Specifications

7. Warranty and Support

7.1. Warranty Information

This Blomus product is covered by a 2-year manufacturer's defect warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear.

7.2. Customer Support

For any questions, concerns, or warranty claims regarding your Blomus MENOTO Towel Stand, please contact Blomus customer service. Refer to the official Blomus website or your purchase documentation for the most current contact information.