Greenline B00JZLVO3C

Greenline LED Night Light with Motion Sensor 230V - User Manual

Model: B00JZLVO3C

1. Product Overview

The Greenline LED Night Light is designed for indoor use, offering intelligent lighting with a motion and twilight sensor. Its sleek design integrates seamlessly into any indoor environment. This night light can be set to operate automatically based on motion and ambient light, or to provide continuous illumination.

  • High-quality LED night light with exclusive design.
  • Features both motion and twilight sensors for automatic operation.
  • Can be switched to provide continuous light.
  • Designed for 230V standard wall outlets.

2. Setup and Installation

The Greenline LED Night Light is designed for simple plug-and-play installation. It is intended for indoor use only.

  1. Unpack the Device: Carefully remove the night light from its packaging.
  2. Select a Location: Choose an indoor standard 230V wall outlet where you wish to use the night light. Ensure the location is free from obstructions that might block the motion sensor's field of view.
  3. Plug In: Insert the night light directly into a standard 230V wall outlet.
Greenline LED Night Light with 230V plug

Image 1: Rear view of the Greenline LED Night Light showing the 230V plug for direct wall outlet insertion.

3. Operating Instructions

The night light features a slide switch with three modes: ON, OFF, and AUTO.

  • ON Mode: Slide the switch to "ON". The night light will illuminate continuously, regardless of ambient light conditions or motion detection.
  • OFF Mode: Slide the switch to "OFF". The night light will remain off.
  • AUTO Mode (Motion and Twilight Sensor): Slide the switch to "AUTO". In this mode, the night light will only activate under the following conditions:
    • The ambient light is insufficient (dark environment).
    • Motion is detected within its range.

    If the environment is bright enough, the night light will not turn on in AUTO mode. Once activated by motion in a dark environment, the light will remain on for approximately 45 seconds. It will turn off if no further motion is detected within this period. The motion detector has a detection angle of 120° and a range of up to 3.5 meters.

Greenline LED Night Light installed in a closet

Image 2: The night light providing illumination inside a closet, demonstrating its utility in dark spaces.

Two Greenline LED Night Lights illuminating a hallway

Image 3: Multiple night lights installed along a wall in a hallway, providing ambient light.

4. Maintenance

The Greenline LED Night Light requires minimal maintenance.

  • Cleaning: To clean the device, first unplug it from the wall outlet. Use a soft, dry cloth to wipe the surface. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the unit.
  • No User-Serviceable Parts: The night light contains no user-serviceable parts. Do not attempt to open or repair the device, as this will void the warranty and could pose a safety risk.

5. Troubleshooting

If you encounter issues with your Greenline LED Night Light, please refer to the following common problems and solutions:

ProblemPossible Cause / Solution
Light does not turn on in AUTO mode.
  • Environment is too bright: The twilight sensor prevents activation in sufficient ambient light. Test in a darker area.
  • No motion detected: Ensure the motion sensor's path is clear and you are within the 3.5m detection range and 120° angle.
  • Incorrect switch setting: Ensure the switch is set to "AUTO".
Light stays on continuously in AUTO mode.
  • Constant motion: The sensor may be continuously detecting motion. Relocate the night light to an area with less constant activity.
  • Sensor obstruction: Something might be intermittently triggering the sensor.
Light does not turn on at all.
  • No power: Check if the wall outlet is functioning correctly. Try plugging in another device.
  • Switch in OFF position: Ensure the switch is set to "ON" or "AUTO".

6. Technical Specifications

Below are the technical specifications for the Greenline LED Night Light (Model B00JZLVO3C):

FeatureDetail
BrandGreenline
Model Number (ASIN)B00JZLVO3C
GTIN / UPC700153245425
Light SourceLED (4 pieces)
Power Consumption≤ 1 W
VoltageAC 230V
Energy Efficiency ClassA++-A
Motion Detector Angle120°
Motion Detector DistanceUp to 3.5 m
Automatic Shut-off Time45 seconds (after last detected motion)
Operating Temperature-5 to +40 °C
Dimensions (Package)9 x 9 x 8 cm
Weight60 g
MaterialPlastic
Switch TypeSlide Switch (ON-OFF-AUTO)
Usage EnvironmentIndoor only

7. Warranty Information

Specific warranty details for the Greenline LED Night Light are not provided in this manual. Please refer to the retailer's purchase terms or contact Greenline customer support for information regarding warranty coverage and duration.

8. Customer Support

For further assistance, technical support, or inquiries not covered in this manual, please contact Greenline customer service through their official website or the retailer from whom the product was purchased. Please have your model number (B00JZLVO3C) and purchase details ready when contacting support.

© 2023 Greenline. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.