Wëasy KW12 Automatic Ice Maker User Manual

Introduction

Thank you for choosing the Wëasy KW12 Automatic Ice Maker. This compact and portable appliance is designed to provide fresh ice quickly and efficiently, producing up to 12 kg of ice per day. With its intuitive electronic controls and automatic cleaning function, the KW12 is an ideal solution for daily use or small gatherings. Please read this manual thoroughly before operating the appliance to ensure safe and optimal performance.

Important Safety Instructions

To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic precautions:

• Read all instructions before use.
• Do not touch the evaporator when the unit is making ice, as it may cause frostbite.
• Do not immerse the appliance, power cord, or plug in water or other liquids.
• Supervise children closely when the appliance is in use.
• Unplug the ice maker from the outlet when not in use and before cleaning.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• Use only accessories recommended by the manufacturer.
• Do not use outdoors.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Ensure proper ventilation around the unit. Maintain at least 15 cm of space on all sides.
• Use only potable water.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

Product Overview

Figure 1: Front view of the Wëasy KW12 Automatic Ice Maker, showcasing its compact black body and white top lid.

Figure 2: Angled view of the ice maker, highlighting the ventilation grilles on the side, essential for heat dissipation.

Figure 3: Close-up of the control panel, showing 'ICE FULL', 'ADD WATER', 'ON/OFF', and 'CLEAN' buttons, along with indicator lights and the transparent lid revealing ice cubes in the basket.

Figure 4: Top view of the ice maker with the lid open, displaying the removable ice basket and the included ice scoop, ready for use.

Components:

• Control Panel: Features indicator lights for "ICE FULL" and "ADD WATER", and buttons for "ON/OFF" and "CLEAN".
• Transparent Lid: Allows monitoring of ice production without opening.
• Ice Basket: Removable for easy ice collection.
• Water Reservoir: Located beneath the ice basket.
• Ice Scoop: For hygienic handling of ice.
• Evaporator Rods: Where ice cubes are formed.

Setup

Unpacking:

1. Carefully remove all packaging materials.
2. Check for any damage during transit. If damaged, do not operate and contact customer support.
3. Remove all accessories (ice basket, ice scoop) from inside the unit.

Placement:

• Place the ice maker on a flat, stable surface, away from direct sunlight and heat sources.
• Ensure there is at least 15 cm (6 inches) of clear space around the unit for proper ventilation.
• Do not place the unit near appliances that produce heat, such as ovens or radiators.

Initial Cleaning:

Before first use, it is recommended to clean the ice maker:

1. Open the lid and remove the ice basket.
2. Clean the interior with a soft cloth and warm water with a mild detergent.
3. Rinse thoroughly and drain any remaining water through the drain plug (if available, otherwise wipe dry).
4. Run the automatic cleaning cycle (refer to the 'Operating' section for details).

Operating Instructions

Making Ice:

1. Ensure the unit is plugged into a grounded electrical outlet (220 Volts).
2. Open the lid and remove the ice basket.
3. Fill the water reservoir with potable water up to the MAX fill line. Do not overfill.
4. Replace the ice basket and close the lid.
5. Press the ON/OFF button to start the ice making cycle. The "ICE MAKING" indicator light will illuminate.
6. The first batch of ice will be ready in approximately 9 minutes. Subsequent cycles will be faster.
7. When the "ICE FULL" indicator light illuminates, the ice basket is full, and the unit will pause ice production. Remove ice to resume.
8. When the "ADD WATER" indicator light illuminates, the water reservoir is low. Add more water to resume ice production.
9. To stop ice production, press the ON/OFF button again.

Figure 5: Internal view of the ice maker, illustrating the evaporator rods where ice forms. The image also highlights the unit's capacity to produce up to 12 kg of ice per 24 hours.

Figure 6: Detailed close-up of ice cubes in the process of forming on the evaporator rods, demonstrating the rapid freezing mechanism.

Automatic Cleaning Function:

The Wëasy KW12 features an automatic cleaning function for convenience:

1. Ensure the water reservoir is filled with clean water.
2. Press and hold the CLEAN button for a few seconds to activate the cleaning cycle.
3. The unit will circulate water to clean internal components. This cycle typically lasts several minutes.
4. Once the cycle is complete, drain the water from the reservoir.

Maintenance

Regular Cleaning:

• Daily: Wipe the exterior with a soft, damp cloth.
• Weekly: Clean the water reservoir and ice basket with warm water and a mild detergent. Rinse thoroughly.
• Monthly: Perform the automatic cleaning cycle. For deeper cleaning, a solution of water and vinegar (10:1 ratio) can be used in the reservoir, followed by several rinses with clean water.
• Ensure the drain plug is opened to completely empty the water reservoir after cleaning.

Storage:

• If the ice maker will not be used for an extended period, drain all water from the reservoir.
• Clean the unit thoroughly and allow it to air dry completely before storing.
• Store the appliance in a cool, dry place, away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Figure 7: The Wëasy KW12 Ice Maker positioned next to a pitcher of refreshing iced lime water, demonstrating its practical use in a home setting.

Warranty and Support

The Wëasy KW12 Automatic Ice Maker comes with an extended 2-year warranty. This warranty covers manufacturing defects and ensures peace of mind for prolonged and reliable use.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact our customer service. An after-sales service workshop is available in France to provide dedicated support.

Please retain your proof of purchase for warranty validation.