Honeywell Safes & Door Locks 5005P

Honeywell 5005P Digital Lock Small Safe Box Instruction Manual

Model: 5005P | Brand: Honeywell Safes & Door Locks

Introduction

This instruction manual provides essential information for the safe and effective use of your Honeywell 5005P Digital Lock Small Safe Box. Please read this manual thoroughly before setup and operation to ensure proper functionality and security.

The Honeywell 5005P is a compact steel security safe designed for securing valuables. It features a programmable digital lock for quick access and includes emergency override keys for backup. The safe is constructed from solid steel with a scratch-resistant finish and a carpeted interior to protect contents.

Safety Information

  • Keep emergency override keys in a secure location away from the safe and out of reach of unauthorized individuals. Do not store them inside the safe.
  • Ensure the safe is placed on a stable, level surface. For enhanced security, consider bolting the safe down as instructed.
  • Do not expose the safe to extreme temperatures or moisture. This safe is not water-resistant.
  • Regularly check battery levels to ensure continuous operation of the digital lock.
  • Do not attempt to force the safe open if the digital lock malfunctions. Use the override keys or contact customer support.

Package Contents

Verify that all items are present in the package:

  • Honeywell 5005P Digital Lock Small Safe Box
  • Emergency Override Keys (2)
  • Mounting Hardware (bolts, washers)
  • Instruction Manual

Setup

1. Battery Installation

The digital lock requires 4 AA batteries (not included). To install:

  1. Open the safe using one of the emergency override keys.
  2. Locate the battery compartment on the inside of the safe door.
  3. Insert 4 AA batteries, ensuring correct polarity (+/-).
  4. Close the battery compartment cover.

2. Setting Your Digital Code

To program your personal digital code:

  1. With the safe door open, press the red reset button located on the inside of the door, near the hinge. A yellow light will illuminate on the keypad.
  2. Enter your desired 3-8 digit code on the keypad.
  3. Press the "E" button to confirm. The yellow light will turn off, indicating the code is set.
  4. Test your new code with the door open before closing it.
Honeywell 5005P safe with digital keypad and two emergency override keys

Figure 1: Digital keypad and emergency override keys.

3. Mounting the Safe

For enhanced security, the safe can be bolted to a floor or wall. Pre-drilled mounting holes are provided.

  1. Choose a suitable location for mounting.
  2. Mark the drilling points through the pre-drilled holes inside the safe.
  3. Drill pilot holes appropriate for the mounting hardware and surface type.
  4. Secure the safe using the provided bolts and washers.
Diagram showing steps to bolt down the safe: mark holes, drill, install fasteners.

Figure 2: Illustration of the safe bolt-down installation process.

Operating the Safe

1. Opening with Digital Code

  1. Enter your programmed 3-8 digit code.
  2. Press the "E" button. A green light will illuminate, and you will hear a beep.
  3. Within 5 seconds, turn the knob clockwise to open the door.

2. Opening with Emergency Override Key

In case of forgotten code or battery depletion:

  1. Remove the small cover plate on the digital keypad to reveal the keyhole.
  2. Insert one of the emergency override keys and turn it counter-clockwise.
  3. Turn the main knob clockwise to open the door.

3. Closing and Locking

To secure the safe:

  1. Close the safe door firmly.
  2. Turn the knob counter-clockwise to engage the locking bolts. The safe will automatically lock.
Honeywell 5005P safe with door open, showing interior with passport, money, and jewelry.

Figure 3: Interior view of the safe, demonstrating storage capacity.

Maintenance

  • Cleaning: Wipe the exterior with a soft, damp cloth. Avoid abrasive cleaners.
  • Battery Replacement: Replace batteries annually or when the low battery indicator appears (usually a red light or repeated beeps during operation).
  • Key Care: Keep override keys clean and dry. Do not force them into the lock.

Troubleshooting

ProblemPossible CauseSolution
Safe does not open with digital code.Incorrect code entered, low batteries.Re-enter code carefully. Replace batteries. Use override key.
Keypad lights do not illuminate.Dead batteries.Replace all 4 AA batteries.
Door does not close properly.Obstruction in the door frame or locking mechanism.Check for any items blocking the door or bolts. Ensure the safe is on a level surface.

Specifications

  • Model: 5005P
  • Brand: Honeywell Safes & Door Locks
  • Dimensions (External): 9"W x 7"D x 6.6"H
  • Capacity: 0.17 Cubic Feet
  • Lock Type: Electronic, Key
  • Material: Alloy Steel
  • Weight: 6.1 Pounds
  • Mounting Type: Floor Mount (Bolt Down)
  • Power: 4 AA Batteries (not included)
  • Special Feature: Bolt Down, Carpeted Interior
  • Water Resistance: Not Water Resistant
Honeywell 5005P safe with dimensions labeled: 6.6 inches height, 7 inches depth, 9 inches width.

Figure 4: External dimensions of the Honeywell 5005P safe.

Warranty and Support

This Honeywell safe comes with a 5 Year Limited Warranty. For warranty claims, technical support, or assistance with your product, please contact LH Licensed Products, Inc., the exclusive manufacturer and distributor of Honeywell Safes & Door Locks.

Please refer to the contact information provided on the official Honeywell Safes & Door Locks website or your product packaging for the most up-to-date support details.

For more information, you may visit the Honeywell Safes & Door Locks Store.

© 2023 Honeywell Safes & Door Locks. All rights reserved.