1. Product Overview
The MTX THUNDER65 is a pair of 6.5-inch, 2-way coaxial car audio speakers designed to deliver clear and full-bodied sound. These speakers are engineered for extended low-frequency reproduction, providing a richer bass response compared to many other speakers in their class.
Key Features:
- RMS Power Handling: 60 Watts per speaker (120 Watts Peak).
- Frequency Response: 48Hz - 20kHz.
- Cone Material: Durable Polypropylene for enhanced sound quality.
- Extended Low Frequency Reproduction: Allows the speaker to deliver a Bigger, Fuller Sound.
- Concave Cone Design: Improves off-axis sound response.
- Pivoting Tweeter: Allows for 15° adjustment in any direction for optimized sound imaging.
Figure 1: MTX THUNDER65 6.5-inch 2-way coaxial car speaker. This image shows the front view of the speaker with its black cone and central tweeter.
2. Setup and Installation
Proper installation is crucial for optimal performance. If you are unsure about any steps, it is recommended to consult a professional car audio installer.
2.1 Before You Begin:
- Ensure the vehicle's battery is disconnected to prevent electrical shorts.
- Gather necessary tools: screwdrivers, wire strippers, crimpers, drill (if needed), mounting hardware.
- Verify speaker size and mounting depth (Woofer Mounting Depth: 2.063 inches) are compatible with your vehicle's speaker locations.
2.2 Installation Steps:
- Remove Existing Speakers: Carefully remove door panels or speaker grilles to access the factory speakers. Disconnect the wiring.
- Prepare Mounting Location: Clean the mounting surface. If necessary, use the provided template (if included) to mark and drill new mounting holes. Ensure there is sufficient clearance for the speaker's depth.
- Connect Wiring: Connect the positive (+) speaker wire from your amplifier/head unit to the positive terminal on the THUNDER65 speaker, and the negative (-) wire to the negative terminal. Ensure connections are secure and insulated.
- Mount Speakers: Place the THUNDER65 speakers into the mounting location. Secure them using the provided screws or appropriate mounting hardware. Do not overtighten.
- Adjust Tweeter (Optional): The pivoting tweeter can be angled up to 15° to direct sound towards the listening position for improved imaging. Gently adjust the tweeter dome to the desired angle.
- Reassemble: Reinstall speaker grilles and door panels.
- Reconnect Battery: Reconnect the vehicle's battery.
3. Operation
Once installed, the MTX THUNDER65 speakers operate as part of your car's audio system.
- Power On: Turn on your car's head unit or amplifier.
- Audio Source: Select your desired audio source (radio, CD, Bluetooth, etc.).
- Volume Adjustment: Start with the volume low and gradually increase it to a comfortable listening level. Avoid excessively high volumes that cause distortion, as this can damage the speakers.
- Audio Settings: Adjust bass, treble, balance, and fader settings on your head unit or amplifier to optimize sound quality to your preference. The THUNDER65 speakers are designed for rich bass, so fine-tuning these settings can enhance their performance.
4. Maintenance
The MTX THUNDER65 speakers require minimal maintenance to ensure long-lasting performance.
- Cleaning: Periodically wipe the speaker grilles and surrounds with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
- Environmental Protection: While designed for car environments, avoid exposing speakers to excessive moisture or extreme temperatures.
- Connection Check: Occasionally check wiring connections to ensure they remain secure and free from corrosion.
- Avoid Overpowering: Do not continuously play audio at distortion levels, as this can lead to speaker damage.
5. Troubleshooting
If you experience issues with your MTX THUNDER65 speakers, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from speakers |
|
|
| Distorted sound |
|
|
| Weak or no bass |
|
|
6. Specifications
Detailed technical specifications for the MTX THUNDER65 6.5" 2-Way Coaxial Speakers:
| Feature | Specification |
|---|---|
| Brand | MTX |
| Model Number | THUNDER65 |
| Speaker Type | Coaxial, 2-Way |
| Speaker Size | 6.5 Inches |
| RMS Power Handling (Per Speaker) | 60 Watts |
| Peak Power Handling (Per Speaker) | 120 Watts |
| Frequency Response | 48Hz - 20kHz |
| Impedance | 4 Ohms |
| Woofer Material | Polypropylene |
| Woofer Mounting Depth | 2.063 Inches |
| Tweeter Adjustment | Pivoting, 15° in any direction |
| Connectivity Technology | Coaxial, Wired |
| Item Weight | 6.35 Pounds (for the pair) |
| Enclosure Material | Metal, Plastic, Polypropylene, Rubber |
| Manufacturer | Mitek Corporation |
| UPC | 715442171347 |
7. Warranty and Support
The MTX THUNDER65 speakers come with a Limited Warranty. Specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.
For Technical Support and Warranty Claims:
- Refer to the documentation included with your purchase for specific contact information.
- Visit the official MTX website for support resources, FAQs, and contact details: www.mtx.com
- Contact your authorized MTX dealer or the retailer from whom you purchased the product.
Optional protection plans may be available from your retailer, offering extended coverage beyond the standard manufacturer's warranty.