Introduction
This instruction manual provides detailed guidance for the assembly of the Revell USS New Jersey (1982) Platinum Limited Edition 1:350 scale model kit. This highly detailed kit allows enthusiasts to recreate the iconic battleship as it appeared in 1982, featuring advanced armament and intricate components. Please read all instructions carefully before beginning assembly.
Kit Contents
Verify that all components listed below are present in your kit before starting assembly. If any parts are missing or damaged, please contact Revell customer support.
- Plastic parts for the USS New Jersey battleship (1375 parts total)
- Photo-etched parts for enhanced detail
- Metal gun barrels
- Wooden decking material
- Components for 1982 armament, including missile launchers and guns
- Sikorsky SH-60B Sea Hawk helicopters (model components)
- Decals for markings and insignia
- Detailed assembly instructions
This image displays the packaging for the Revell USS New Jersey (1982) Platinum Limited Edition model kit. The box art features the battleship in a dynamic scene, with a human silhouette providing a sense of the kit's overall size.
Assembly Instructions
The assembly of this model kit requires patience and attention to detail. Follow the numbered steps provided in the included printed instruction booklet. Below are general guidelines:
- Preparation: Carefully remove all parts from the sprues using a hobby knife or sprue cutters. Clean any excess plastic (flash) from the parts.
- Sub-Assemblies: Begin by assembling smaller sections of the ship as indicated in the instructions. This often includes turrets, superstructure sections, and aircraft.
- Hull Assembly: Join the hull halves, ensuring a tight fit. Use model cement sparingly.
- Decking: Apply the wooden decking material according to the instructions, ensuring proper alignment.
- Main Assembly: Attach the assembled sub-sections to the main hull.
- Photo-Etched Parts: Handle photo-etched parts with tweezers. Use super glue for these delicate components.
- Painting: Refer to the painting guide for recommended colors and schemes. Paint components before or after assembly as advised in the instructions.
- Decals: Apply decals to the finished model using decal setting solutions for a seamless appearance.
Note: Specific tools such as hobby knives, tweezers, model cement, and paints are required and sold separately.
Specifications
| Model Number: | RG5129 |
| Scale: | 1:350 |
| Length (assembled): | 775 mm (approximately 30.5 inches) |
| Number of Parts: | 1375 |
| Skill Level: | 5 (Advanced) |
| Recommended Age: | 10 years and up |
| Materials: | Plastic, Metal, Wood |
| Product Dimensions (Box): | 26 x 14 x 95 cm (10.2 x 5.5 x 37.4 inches) |
| Item Weight (Box): | 1.81 kg (approximately 4 lbs) |
Safety Information
Please observe the following safety precautions during assembly:
- Small Parts: This kit contains small parts that may pose a choking hazard for young children. Keep out of reach of children under 3 years.
- Sharp Tools: Assembly requires the use of sharp tools such as hobby knives and tweezers. Exercise caution to prevent injury.
- Adhesives and Paints: Use model cement, super glue, and paints in a well-ventilated area. Avoid prolonged skin contact and inhalation of fumes. Follow manufacturer's instructions for all chemical products.
- Eye Protection: Consider wearing eye protection when cutting or sanding parts.
Maintenance and Display
Once assembled, your model requires minimal maintenance. Keep it away from direct sunlight and extreme temperatures to prevent material degradation and paint fading. Dust gently with a soft brush or compressed air. For display, ensure the model is placed on a stable surface to prevent accidental falls.
Troubleshooting Common Issues
- Parts Not Fitting: Ensure parts are correctly oriented. Trim any excess plastic (flash) that might be obstructing the fit. Light sanding may be required.
- Decals Not Adhering: Ensure the surface is clean and smooth. Use a decal setting solution to help the decal conform to the surface and adhere better.
- Paint Issues: Ensure surfaces are clean and primed before painting. Apply paint in thin, even coats to avoid brush marks or uneven texture. Allow adequate drying time between coats.
Customer Support
For further assistance, missing parts, or technical inquiries regarding your Revell model kit, please contact Revell customer support. Refer to the contact information provided on the product packaging or the official Revell website.
Brand: Revell
