Introduction
This manual provides instructions for the safe and proper use of your HQRP AC Power Cord. This 6-foot black power cord is designed to provide reliable power to compatible Baby-Lock sewing machines. Please read this manual thoroughly before use and retain it for future reference.
Image: The HQRP AC Power Cord, showing its full length and black color.
Setup
- Identify Connectors: The power cord has two distinct ends. One end is a polarized IEC C7 connector (often referred to as a 'figure-8' connector), and the other is a NEMA 1-15P plug (standard 2-prong US wall plug).
- Connect to Device: Carefully insert the IEC C7 connector into the corresponding power inlet on your Baby-Lock sewing machine. Ensure it is fully seated.
- Connect to Power Outlet: Plug the NEMA 1-15P end of the power cord into a standard 120V AC American wall outlet. Ensure the outlet is easily accessible.
- Verify Connection: Confirm that both ends of the cord are securely connected before attempting to power on your device.
Image: A detailed view of the IEC C7 polarized connector and the NEMA 1-15P plug, highlighting their design.
Operating
Once the HQRP AC Power Cord is correctly connected to your Baby-Lock sewing machine and a live power outlet, your device is ready to receive power. Refer to your sewing machine's instruction manual for specific operating procedures.
Maintenance
- Cleaning: Disconnect the power cord from both the device and the wall outlet before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or immerse the cord in water.
- Storage: When not in use, store the power cord in a cool, dry place, away from direct sunlight and excessive heat. Avoid tightly coiling or bending the cord sharply, as this can damage the internal wires.
- Inspection: Periodically inspect the cord for any signs of damage, such as cuts, fraying, or exposed wires. If any damage is observed, discontinue use immediately and replace the cord.
Troubleshooting
If your device does not power on after connecting the HQRP AC Power Cord, consider the following:
- Check Connections: Ensure both the IEC C7 connector and the NEMA 1-15P plug are fully and securely inserted into their respective ports.
- Verify Power Outlet: Test the wall outlet with another known working appliance to confirm it is supplying power.
- Inspect Cord for Damage: Visually inspect the entire length of the power cord for any visible damage. If damage is found, the cord must be replaced.
- Device Power Switch: Ensure the power switch on your Baby-Lock sewing machine is in the 'ON' position.
Specifications
| Feature | Detail |
|---|---|
| Brand | HQRP |
| Model Number | 887774402171425 |
| Color | Black |
| Length | 6 feet (approx. 1.83 meters) |
| Wire Size | 18 AWG |
| Connectors | IEC C7 polarized to NEMA 1-15P |
| Plug Format | Type B (NEMA 1-15P) |
| Certification | UL Listed |
| Compatibility | Baby-Lock BL7800, BL8000, BL8500, BL9500, ESN (Encore), ESI, ESI2, EMI1, EM1, ESE, ESE2 |
Image: Diagram detailing the features of the power cord, including its UL plug, bend protection, SPT-2 cord type, high-quality copper, and 6-foot length.
Image: Cross-section view of the SPT-2 cord, illustrating durable PVC insulation, high-quality copper wires, and reinforced stress points for enhanced durability.
Image: Information on UL testing, confirming the cord has passed deformation, mechanical strength, flame, heat-shock resistance, and spark tests.
Warranty
This HQRP AC Power Cord comes with a 200-day warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use conditions.
Support
For further assistance, technical support, or warranty inquiries, please contact HQRP customer service. Refer to the packaging or the official HQRP website for current contact information.