1. Introduction and Product Overview
This manual provides essential information for the safe and effective use of your HQRP AC Power Cord. This 6-foot black power cord is designed to provide reliable power to compatible Baby-Lock sewing machines. It features an IEC C7 polarized connector on one end and a NEMA 1-15P connector on the other, suitable for standard American outlets.
Image 1.1: The HQRP AC Power Cord, showing its full length and connectors.
The cord is UL Listed, ensuring it meets recognized safety standards. Its 18 AWG wire size indicates a robust construction suitable for its intended application.
2. Setup Instructions
Follow these steps to properly connect your HQRP AC Power Cord to your Baby-Lock sewing machine:
- Inspect the Cord: Before connecting, visually inspect the entire length of the power cord for any signs of damage, such as cuts, frayed insulation, or bent prongs. Do not use a damaged cord.
- Ensure Power Off: Verify that your Baby-Lock sewing machine is turned off and unplugged from the wall outlet.
- Connect to Machine: Locate the power input port on your Baby-Lock sewing machine. This port typically accepts the IEC C7 (figure-8) connector. Firmly insert the IEC C7 end of the HQRP power cord into this port until it is fully seated.
- Connect to Wall Outlet: Plug the NEMA 1-15P (two-prong) end of the power cord into a standard, grounded 120V AC wall outlet. Ensure the outlet is easily accessible.
- Verify Connection: Confirm both ends of the cord are securely connected before turning on your sewing machine.
Image 2.1: Close-up view of the IEC C7 (left) and NEMA 1-15P (right) connectors.
3. Operating Instructions
Once the HQRP AC Power Cord is correctly connected, operate your sewing machine as follows:
- Power On: Turn on your Baby-Lock sewing machine using its power switch.
- Normal Use: Use your sewing machine according to its specific operating manual. The power cord provides the necessary electrical connection.
- Disconnecting: To disconnect power, first turn off the sewing machine. Then, grasp the plug firmly and pull it straight out from the wall outlet. Do not pull on the cord itself. Finally, disconnect the IEC C7 end from the sewing machine if necessary for storage or transport.
Safety Precaution:
- Always ensure the power cord is not pinched, twisted, or placed under heavy objects.
- Avoid exposing the cord to excessive heat, moisture, or direct sunlight.
- Do not attempt to modify or repair the power cord. If damaged, replace it with a new, compatible cord.
4. Maintenance
Proper maintenance ensures the longevity and safe operation of your power cord:
- Cleaning: Disconnect the cord from all power sources before cleaning. Wipe the cord and plugs with a dry, soft cloth. Do not use liquid cleaners or immerse the cord in water.
- Storage: When not in use, coil the cord loosely. Avoid tight coiling or bending at sharp angles, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and heavy objects.
- Regular Inspection: Periodically inspect the cord for any signs of wear, such as cracks in the insulation, exposed wires, or loose connections at the plugs. Replace the cord immediately if any damage is observed.
5. Troubleshooting
If your sewing machine is not receiving power after connecting the HQRP AC Power Cord, perform the following checks:
- Check Connections: Ensure both the IEC C7 connector at the machine and the NEMA 1-15P plug at the wall outlet are fully and securely inserted.
- Verify Outlet Power: Test the wall outlet with another known working appliance to confirm it is supplying power.
- Inspect Cord for Damage: Re-examine the entire length of the power cord for any visible damage. A damaged cord must be replaced.
- Machine Power Switch: Confirm that the power switch on your Baby-Lock sewing machine is in the 'ON' position.
If the issue persists after these checks, consult the user manual for your Baby-Lock sewing machine or contact a qualified technician.
6. Specifications
| Feature | Detail |
|---|---|
| Product Type | AC Power Cord |
| Brand | HQRP |
| Color | Black |
| Length | 6 feet (approx. 1.8 meters) |
| Connectors | IEC C7 polarized (female) to NEMA 1-15P (male) |
| Wire Size | 18 AWG |
| Safety Certification | UL Listed |
| Model Number | 887774402171423 |
Image 6.1: Diagram illustrating the components and length of the power cord.
Image 6.2: Detailed view of the SPT-2 cord construction, highlighting durable PVC insulation and high-quality copper wiring.
Image 6.3: Information on UL Listing and various safety tests passed by the power cord, including deformation, mechanical strength, flame, heat-shock resistance, and spark tests.
7. Warranty Information
This HQRP AC Power Cord comes with a 200-day warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for any warranty claims.
Note: This is not an Original Equipment Manufacturer (OEM) product. HQRP branded products are replacements. All brand names and logos mentioned are registered trademarks of their respective owners. Any use of brand names or model designations for this product is solely for demonstrating compatibility.
8. Support
For further assistance or if you encounter issues not covered in this manual, please refer to the support resources provided by your product retailer or the HQRP official website. Ensure you have your product model number (887774402171423) and purchase details available when seeking support.