Introduction
This manual provides essential instructions for the safe and efficient use of your Brennenstuhl Premium-Line 6-Way Power Strip. Please read this manual thoroughly before operating the device and retain it for future reference.
The Brennenstuhl Premium-Line power strip is designed for connecting multiple electrical devices to a single power outlet, featuring six earth-contact sockets, a safety switch, and a 3-meter cable.
Safety Instructions
To prevent injury or damage, always observe the following safety precautions:
- Do not connect multiple power strips in series.
- Do not cover the power strip during operation to prevent overheating.
- Ensure the total power consumption of connected devices does not exceed the maximum load specified in the technical specifications.
- This product is designed for indoor use only. Do not expose to moisture or extreme temperatures.
- Do not open or modify the power strip. Repairs should only be performed by qualified personnel.
- Keep out of reach of children.
- Always insert plugs completely into the sockets.
Product Features
- 6 Earth-Contact Sockets: Provides power connections for up to six devices.
- 45° Angled Sockets: Optimized arrangement allows for easy connection of angled plugs and larger power adapters without obstructing adjacent sockets.
- Illuminated 2-Pole Safety Switch: Allows for simultaneous switching on/off of all connected devices, enhancing safety and energy saving.
- 3-Meter Cable: Offers flexible placement options for the power strip.
- High Break-Resistant Special Plastic: Constructed from durable material for longevity.
- Innovative Suspension Device: Integrated feature for convenient wall mounting.
Figure 1: Overall view of the Brennenstuhl Premium-Line 6-Way Power Strip, showing the six sockets, illuminated switch, and attached 3-meter power cable.
Figure 2: Detail view highlighting the innovative suspension device for wall mounting and the 45-degree angled arrangement of the earth-contact sockets, designed to accommodate angled plugs efficiently.
Figure 3: Close-up illustrating the highly break-resistant special plastic construction, the illuminated 2-pole safety switch, and the specifications of the 3-meter H05VV-F 3G1.5 cable.
Setup
- Unpack: Carefully remove the power strip from its packaging.
- Placement: Position the power strip on a stable, dry surface, away from heat sources and moisture. If wall mounting, use appropriate screws and anchors (not included) with the integrated suspension device.
- Connect to Power: Plug the power strip's main plug into a properly grounded wall outlet.
- Connect Devices: Insert the plugs of your electrical devices into the available sockets on the power strip. Ensure all plugs are fully inserted.
Operation
The Brennenstuhl Premium-Line power strip is straightforward to operate:
- Switching On: Press the illuminated 2-pole safety switch to the "ON" position. The switch will light up, indicating that power is supplied to all connected sockets.
- Switching Off: Press the illuminated 2-pole safety switch to the "OFF" position. The light on the switch will turn off, cutting power to all connected sockets. This is recommended when devices are not in use to save energy.
Maintenance
- Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or abrasive materials.
- Inspection: Periodically inspect the power strip and its cable for any signs of damage, such as cuts, fraying, or discoloration. If damage is found, discontinue use immediately and replace the unit.
- Storage: When not in use for extended periods, store the power strip in a dry, dust-free environment.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to connected devices. | Power strip switch is off. Wall outlet has no power. Overload. | Press the switch to the "ON" position. Check the wall outlet with another device or circuit breaker. Disconnect some devices; check total wattage. |
| Switch does not light up. | Power strip not plugged in. Faulty switch. | Ensure the power strip is securely plugged into a live wall outlet. If still not lighting up, the unit may be faulty; discontinue use. |
| Devices intermittently lose power. | Loose connections. Faulty device plug. | Ensure all plugs are firmly seated in the sockets. Test the device with another power source. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Brennenstuhl |
| Model Number | 1952260100 |
| Number of Sockets | 6 (Earth-contact) |
| Socket Arrangement | 45° Angled |
| Switch Type | Illuminated 2-pole safety switch |
| Cable Length | 3 meters |
| Cable Type | H05VV-F 3G1.5 |
| Material | High break-resistant special plastic |
| Voltage | 230 Volts |
| Item Weight | 0.76 Kilograms (approx. 1.67 pounds) |
| Product Dimensions (LxWxH) | Approx. 2.64 x 3.54 x 0.04 inches (Note: This dimension seems incorrect for a power strip, likely referring to packaging or a component. Refer to product packaging for accurate dimensions.) |
| Intended Use | Indoor use only |
Warranty and Support
Brennenstuhl products are manufactured to high-quality standards. For information regarding warranty coverage or technical support, please refer to the documentation included with your purchase or visit the official Brennenstuhl website.
Protection plans may be available for extended coverage; please check with your retailer for details.
