Introduction
This manual provides instructions for the proper use and care of your sourcing map 3.5mm Male Mono Jack Audio Adapter Connector. Please read this guide thoroughly before use to ensure optimal performance and longevity of the product.
Product Overview
The sourcing map 3.5mm Male Mono Jack Audio Adapter Connector is designed for extending or adapting audio connections. It features a durable black plastic body and a silver-tone plated solder type connector, ideal for creating a longer connection or for professional audio applications requiring a 3.5mm audio adapter.
Figure 1: Two 3.5mm Male Mono Jack Audio Adapter Connectors. These connectors feature a black plastic housing and a silver-tone plated 3.5mm mono jack tip, designed for audio signal extension or adaptation.
Key Features:
- Connector Type: 3.5mm Male Mono
- Construction: Black Plastic body with silver-tone plated solder type connection
- Total Length: Approximately 48mm / 1.8 inches
- Color: Black
- Application: Suitable for extending or adapting mono audio connections.
Package Contents
- 5 x 3.5mm Male Mono Jack Audio Adapter Connectors
Setup Instructions
- Identify Connection Points: Determine the audio device or cable you wish to connect to or extend. Ensure it requires a 3.5mm mono male jack connection.
- Prepare Cable (if soldering): If you are soldering a cable to the adapter, carefully strip the insulation from your audio cable to expose the core wire(s) and ground.
- Solder Connection (if applicable): Solder the audio cable wires to the appropriate terminals inside the adapter. For mono connections, typically one signal wire and one ground wire are used. Ensure secure and clean solder joints.
- Assemble Adapter: Carefully reassemble the adapter housing, ensuring all components are properly seated and secured.
- Connect to Device: Insert the 3.5mm male mono jack into the corresponding 3.5mm mono female port on your audio device or cable. Ensure a firm and complete connection.
Note: These adapters are designed for mono audio signals. Using them with stereo devices may result in partial or no audio output.
Operating Instructions
Once connected, the adapter functions as a passive audio connector. No specific operational steps are required beyond ensuring a secure physical connection.
- Ensure the adapter is fully inserted into both the source and destination ports.
- Verify that the audio source is active and producing sound.
- Adjust volume levels on your audio devices as needed.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the exterior of the adapter. Avoid using liquid cleaners or solvents.
- Storage: Store the adapters in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid excessive force when inserting or removing the adapter to prevent damage to the connector or the device port.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No audio output | Loose connection; Incorrect port; Mono/Stereo incompatibility; Faulty cable/device. | Ensure adapter is fully inserted. Verify correct port (e.g., audio out). Confirm devices are mono compatible. Test with another cable/device. |
| Poor audio quality (static, hum) | Loose connection; Interference; Damaged adapter/cable. | Check connections. Move away from potential interference sources. Inspect adapter and cables for damage. |
| Adapter does not fit | Incorrect jack size or type. | Verify that your device requires a 3.5mm mono male jack. This adapter is not for 2.5mm or 6.35mm jacks, nor for stereo connections. |
Specifications
| Feature | Detail |
|---|---|
| Product Name | Connector |
| Type | 3.5mm Male Mono |
| Total Length (Approx.) | 48mm / 1.8 inches |
| Color | Black |
| Item Weight (per unit) | Approx. 2.2g (11g for 5 units) |
| Package Dimensions | 5.59 x 3.78 x 0.16 inches |
| ASIN | B00HGAJFEE |
| Model Number | FBA_a13112100ux1057 |
| Manufacturer | uxcell |
| Brand | sourcing map |
| Number of Ports | 1 (per connector) |
Warranty and Support
For information regarding warranty, returns, or technical support, please refer to the retailer's policy where the product was purchased or contact sourcing map customer service directly. Please retain your proof of purchase for any warranty claims.