Sure-Loc BL-TR1 15 Boulder Bath Series Towel Ring Installation and Care Manual

Introduction

This manual provides detailed instructions for the proper installation, use, and maintenance of your Sure-Loc BL-TR1 15 Boulder Bath Series Towel Ring. Designed for durability and style, this towel ring is a part of the Sure-Loc Contemporary Series, offering reliable construction and a satin nickel finish.

Included Components

Before beginning installation, verify that all components are present:

• Towel Ring Assembly (Satin Nickel finish)
• Mounting Bracket
• Wood Mounting Screws
• Drywall Anchors
• Installation Instructions (this manual)

Image: The Sure-Loc BL-TR1 15 Boulder Bath Series Towel Ring, showcasing its satin nickel finish and round design, ready for wall mounting.

Setup and Installation

The Sure-Loc BL-TR1 15 Towel Ring is designed for easy surface mounting. Follow these steps for secure installation:

1. Choose Location: Select a suitable wall location for the towel ring, ensuring it is at an appropriate height and clear of obstructions.
2. Mark Mounting Points: Position the mounting bracket against the wall at the desired location. Use a pencil to mark the screw hole positions.
3. Prepare Wall:
   • For Wood Studs: Drill pilot holes at the marked points using a drill bit slightly smaller than the wood screws.
   • For Drywall: Drill holes large enough for the drywall anchors. Insert the drywall anchors until they are flush with the wall surface.
4. Attach Mounting Bracket: Align the mounting bracket with the prepared holes. Secure the bracket to the wall using the provided wood mounting screws (for wood studs) or by screwing into the drywall anchors (for drywall). Ensure the bracket is firmly attached.
5. Mount Towel Ring: Position the towel ring assembly onto the mounting bracket. The design allows for a "Canceled Screw Mount" which typically means the screws are hidden once the main assembly is attached. Secure the towel ring to the bracket according to the specific mechanism (e.g., a small set screw at the bottom of the base).
6. Test Security: Gently pull on the towel ring to ensure it is securely fastened to the wall.

Operating Instructions

The Sure-Loc BL-TR1 15 Towel Ring is designed for holding hand towels or washcloths. Simply drape your towel over the ring for convenient access and drying.

Maintenance and Care

To maintain the satin nickel finish and ensure the longevity of your towel ring, follow these care instructions:

• Cleaning: Clean regularly with a soft, damp cloth. For stubborn spots, use a mild soap solution and immediately dry with a clean, soft cloth.
• Avoid Harsh Cleaners: Do not use abrasive cleaners, ammonia-based products, or harsh chemicals, as these can damage the finish.
• Periodic Check: Periodically check the mounting screws for tightness and re-tighten if necessary to ensure the towel ring remains secure.

Troubleshooting

If you encounter any issues with your towel ring, consider the following:

• Towel Ring Feels Loose: This typically indicates that the mounting screws or the set screw securing the ring to the bracket have loosened over time. Re-tighten all visible screws. If installed into drywall anchors, ensure the anchors are still secure.
• Finish Discoloration: Ensure you are using only mild cleaning agents and soft cloths. Harsh chemicals can cause discoloration.

Specifications

Warranty and Support

Specific warranty information for the Sure-Loc BL-TR1 15 Boulder Bath Series Towel Ring is not provided in this document. Please refer to the product packaging or the official Sure-Loc website for warranty details.

For technical support or further assistance, please contact Sure-Loc customer service through their official channels.