Introduction
Welcome to your new Zuri Furniture Fiore Modern Round 53 Inch Glass Dining Table. This manual provides essential information for assembly, safe use, and proper maintenance of your dining table. Please read these instructions carefully before assembly and retain them for future reference.
Safety Information
- Weight Limit: Do not exceed the maximum weight limit of 152 lbs (68.9 kg) on the table surface. Exceeding this limit may cause damage to the table or personal injury.
- Glass Edges: Exercise caution when handling the glass top and lazy susan. The edges, while finished, can still be sharp. Always wear appropriate protective gloves during assembly.
- Stability: Ensure all components are securely fastened and the table is placed on a flat, stable, and non-slippery surface before use. Uneven surfaces can compromise stability.
- Hot Items: Avoid placing excessively hot items directly on the glass surface. Always use coasters or protective mats to prevent thermal shock or damage.
- Children and Pets: Keep children and pets away from the table during assembly. Do not allow children to climb on or play around the table.
Package Contents
Please verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer support immediately.
- 1x 53" Clear Tempered Round Glass Top
- 1x Frosted Glass Inset Rotating Lazy Susan
- 1x Chrome and Black Steel Base Assembly (Column and Base Plate)
- 1x Hardware Pack (includes screws, washers, and any necessary tools)
Setup and Assembly
This table requires assembly. It is strongly recommended that two adults perform the assembly to ensure safety and proper handling of the glass components.
Tools Required:
- Phillips Head Screwdriver (may not be included)
- Allen Wrench (usually included in hardware pack)
Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean, and flat surface (e.g., a blanket or carpet) to prevent scratches or damage to the components and your floor. Identify all parts against the package contents list.
- Assemble the Base: Attach the chrome column to the black steel base plate using the provided screws and Allen wrench from the hardware pack. Ensure all screws are tightened securely but do not overtighten. The base should be stable and upright.
- Position the Main Glass Top: With assistance, carefully lift the large clear glass top and center it onto the assembled base. The base typically has pre-installed supports or suction cups designed to hold the glass securely. Ensure the glass is evenly balanced.
- Install the Lazy Susan: Gently place the smaller frosted glass lazy susan into the designated circular recess in the center of the main glass top. Ensure it sits correctly on its rotating mechanism and can spin freely.
- Final Check: Before using the table, verify that all connections are tight, the glass tops are stable, and the table does not wobble. Adjust as necessary.
Operating Instructions
Using the Lazy Susan:
The inset frosted glass lazy susan is designed for smooth, convenient rotation. To use, simply place serving dishes or condiments on its surface and gently rotate it in either direction to share items around the table.
General Use:
This dining table is designed to comfortably seat up to 5 guests. Ensure that weight is distributed evenly across the table surface. Avoid standing or sitting on the table.
Maintenance
Cleaning the Glass:
- Use a soft, lint-free cloth and a non-abrasive glass cleaner to wipe down the clear and frosted glass surfaces.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals, which can scratch or damage the glass finish.
- For stubborn marks, a mixture of white vinegar and water (50/50) can be applied with a soft cloth.
Cleaning the Chrome Base:
- Wipe the chrome and black steel base with a soft, damp cloth.
- For a polished look, use a non-abrasive chrome cleaner specifically designed for metal finishes.
- Avoid harsh chemicals or abrasive materials that may damage the chrome plating or paint.
General Care:
- Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- When moving the table, always lift it rather than dragging it to prevent damage to the base, glass, or floor.
- Protect the glass from direct impact with hard objects to prevent chipping or breakage.
Troubleshooting
Table is Unstable or Wobbles:
- Ensure all assembly screws connecting the column to the base plate are fully tightened.
- Verify that the table is placed on a level surface. If your floor is uneven, consider using furniture glides or shims to stabilize the base.
- Check that the main glass top is properly centered and seated on the base supports.
Lazy Susan Not Rotating Smoothly:
- Ensure the lazy susan is properly seated in its designated circular recess and is not obstructed by the main glass top's edge.
- Check for any debris (food particles, dust) that might be obstructing the rotating mechanism. Clean if necessary.
- Verify that the main glass top itself is centered correctly on the table base, as misalignment can affect the lazy susan's movement.
Scratches on Glass:
- Minor surface scratches may sometimes be reduced with specialized glass scratch repair kits (follow product instructions carefully).
- Prevent future scratches by always using placemats, coasters, and avoiding dragging objects across the glass surface.
Specifications
| Feature | Detail |
|---|---|
| Dimensions (L x W x H) | 53" x 53" x 30" (134.6 cm x 134.6 cm x 76.2 cm) |
| Glass Top Thickness | 1/2" (12.7 mm) Clear Tempered Glass |
| Lazy Susan | Inset Rotating Frosted Glass (approx. 29.5" diameter) |
| Base Material | Chrome and Black Steel |
| Seating Capacity | Up to 5 Guests |
| Product Weight | 152 LBS (68.9 kg) |
| Shape | Round |
| Color | Clear (Glass) |
| Model Number (ASIN) | B00GUP0N74 |
| GTIN/UPC | 727908888348 |
Warranty and Support
Warranty Information:
Zuri Furniture products typically come with a manufacturer's warranty covering defects in materials and workmanship. The specific terms and duration of your warranty may vary. Please refer to your original purchase documentation or the official Zuri Furniture website for detailed warranty information.
Customer Support:
For assistance with assembly, missing parts, product defects, or any other inquiries regarding your Zuri Furniture Fiore dining table, please contact Zuri Furniture customer service directly. Contact information can typically be found on the official Zuri Furniture website or through the retailer where the product was purchased.
You may also find additional resources and frequently asked questions by visiting the ZURI Store on Amazon.