1. Product Overview
The AMERELLE 71134CC LED Power Failure Light is a versatile 3-in-1 device designed to provide illumination during power outages and for everyday use. It functions as a rechargeable flashlight, an automatic power failure light, and a plug-in guide light.
Image 1.1: The AMERELLE 71134CC LED Power Failure Light illustrating its three primary functions: a handheld flashlight, an automatic power failure light when plugged into an outlet, and a continuous plug-in guide light.
This device features energy-efficient LED bulbs and a rechargeable NiCad battery, ensuring reliable performance when needed most. Its compact design allows for easy placement in any standard electrical outlet.
2. Setup and Initial Use
- Unpack the Device: Carefully remove the LED Power Failure Light from its packaging.
- Initial Charge: Before first use, plug the device into a standard 120V AC electrical outlet. Ensure the switch on the side of the unit is set to the "AUTO" position. The unit will begin charging its internal NiCad battery. Allow at least 24 hours for the initial full charge.
- Placement: For optimal performance as a power failure light, plug the unit into an easily accessible outlet in a central location or in areas where light is critical during an outage.
Image 2.1: The AMERELLE 71134CC LED Power Failure Light plugged into a wall outlet, indicating its charging status with a red light. This setup ensures the device is ready for use as a power failure light or guide light.
3. Operating Instructions
The AMERELLE 71134CC offers three modes of operation, controlled by the slide switch located on the side of the unit.
Image 3.1: Side view of the AMERELLE 71134CC LED Power Failure Light, highlighting the slide switch with "AUTO", "OFF", and "AUTO" positions for mode selection.
3.1. Power Failure Light Mode
- Plug the unit into a standard 120V AC outlet.
- Set the slide switch to either "AUTO" position.
- In the event of a power outage, the unit will automatically illuminate, providing emergency lighting.
- When power is restored, the light will turn off and resume charging.
3.2. Guide Light Mode
- Plug the unit into a standard 120V AC outlet.
- Set the slide switch to either "AUTO" position.
- The unit's front LEDs will provide a continuous, low-level illumination, acting as a night light or guide light. This mode is active when the unit is plugged in and power is present.
3.3. Flashlight Mode
- Unplug the unit from the electrical outlet.
- Set the slide switch to either "AUTO" position. The front LEDs will illuminate, functioning as a handheld flashlight.
- To turn off the flashlight, set the slide switch to the "OFF" position.
- For optimal flashlight performance, ensure the unit is fully charged before use.
Image 3.2: A hand holding the AMERELLE 71134CC LED Power Failure Light, demonstrating its use as a portable flashlight to illuminate a dark area, such as a doorway.
4. Maintenance
4.1. Battery Care
- The device uses a rechargeable NiCad battery. For best battery life, keep the unit plugged into an outlet when not in use to maintain a full charge.
- If the unit is stored for an extended period, ensure it is fully charged every 3 months to prevent battery degradation.
- Do not attempt to replace the internal battery. Contact customer support if battery issues arise.
4.2. Cleaning
- Clean the exterior of the unit with a soft, dry cloth.
- Do not use abrasive cleaners or solvents, as these may damage the finish.
- Ensure the unit is unplugged before cleaning.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on during power outage. | Unit not plugged in, switch in "OFF" position, or battery not charged. | Ensure unit is firmly plugged into a live outlet. Set switch to "AUTO". Allow 24 hours for initial charge. |
| Flashlight does not work. | Battery is depleted or switch is in "OFF" position. | Plug the unit into an outlet to charge the battery. Set switch to "AUTO" when unplugged for flashlight use. |
| Guide light does not illuminate when plugged in. | Switch is in "OFF" position. | Set the slide switch to either "AUTO" position. |
6. Product Specifications
- Model Number: LYSB00GRSQC1A-SPRTSEQIP
- Brand: AMERELLE
- Dimensions (L x W x H): 12.07 x 5.08 x 3.18 cm (4.75 x 2 x 1.25 inches)
- Weight: 590 grams (1.3 lbs)
- Light Source: LED
- Voltage: 120 Volts
- Battery Type: Rechargeable Nickel-Cadmium (NiCad)
- Material: Aluminum
- Special Feature: Rechargeable, Automatic Power Failure Activation
- UPC: 070686711347, 787732799593
Image 6.1: The AMERELLE 71134CC LED Power Failure Light with its key dimensions indicated, showing a height of 4.75 inches, a width of 2 inches, and a depth of 1.75 inches.
7. Warranty Information
This product is covered by the manufacturer's standard warranty. Please refer to the packaging or the manufacturer's official website for detailed warranty terms and conditions. Keep your purchase receipt as proof of purchase.
8. Customer Support
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact AMERELLE customer support. Contact information can typically be found on the product packaging or the official AMERELLE website.
Please retain this manual for future reference.
