Worx WG119 5.5 Amp 15" Electric String Trimmer & Edger User Manual

Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your WORX WG119 5.5 Amp 15" Electric String Trimmer & Edger. Please read this manual thoroughly before using the product and retain it for future reference.

Figure 1: WORX WG119 Electric String Trimmer & Edger

The WORX WG119 is a versatile 2-in-1 tool designed for both string trimming and precision edging. It features a 5.5 Amp motor, a 15-inch cutting diameter, an automatic dual-line feed system, a 90-degree pivoting head, and an adjustable telescopic shaft for user comfort.

Important Safety Instructions

Always observe basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury.

• Read All Instructions: Familiarize yourself with the controls and proper use of the tool.
• Wear Eye Protection: Always wear safety glasses or goggles when operating the trimmer.
• Wear Appropriate Clothing: Long pants, sturdy footwear, and gloves are recommended. Do not wear loose clothing or jewelry that could get caught in moving parts.
• Keep Area Clear: Ensure the work area is free of debris, rocks, and other objects that could be thrown by the cutting line. Keep bystanders, children, and pets at a safe distance.
• Inspect Before Use: Check the tool for any damaged parts, loose fasteners, or worn cutting line before each use.
• Use Proper Extension Cord: Only use extension cords rated for outdoor use and of adequate gauge for the tool's power requirements.
• Avoid Wet Conditions: Do not operate the trimmer in wet grass or damp conditions to prevent electric shock.
• Unplug When Not In Use: Disconnect the tool from the power supply before making adjustments, changing accessories, or storing.
• Proposition 65 Warning: This product can expose you to chemicals including lead phthalate or bisphenol A which are known to the State of California to cause cancer, birth defects or other reproductive harm. Wash your hands after use. For more information go to www.P65Warnings.ca.gov.

Assembly

The WORX WG119 requires minor assembly before first use. Follow these steps carefully:

1. Attach the Guard: Slide the safety guard onto the trimmer head until it clicks securely into place. Ensure it is firmly seated to protect against debris.
2. Install the Auxiliary Handle: Position the auxiliary handle on the shaft at a comfortable height. Tighten the locking mechanism to secure it. This handle is multi-positional for optimal comfort and control.
3. Adjust the Telescopic Shaft: Loosen the collar on the telescopic shaft and extend or retract the shaft to a length that allows for comfortable operation while maintaining proper posture. Tighten the collar firmly to lock the shaft in position.

Figure 2: WORX WG119 showing adjustable handle and shaft

Ensure all components are securely fastened before connecting the trimmer to a power source.

Operating Instructions

Your WG119 trimmer is designed for efficient grass trimming and lawn edging.

Trimming Operation

• Connect the trimmer to a suitable outdoor-rated extension cord.
• Hold the trimmer firmly with both hands, one on the main handle and one on the auxiliary handle.
• Press the trigger to start the motor.
• Swing the trimmer from side to side, keeping the cutting line parallel to the ground.
• The automatic dual-line feed system will advance the line as needed. If the line becomes too short, briefly release and press the trigger to activate the auto-feed.
• Utilize the flower guard to protect delicate plants and objects from accidental cutting.

Edging Operation

To convert your trimmer into an edger:

1. Ensure the trimmer is unplugged.
2. Locate the pivoting head mechanism. Rotate the shaft 90 degrees until the trimmer head is oriented vertically. This allows for precise edging along driveways, sidewalks, and flowerbeds.
3. Plug in the trimmer and guide the cutting line along the edge you wish to define.

Maintenance

Regular maintenance ensures optimal performance and extends the life of your trimmer.

Line Replacement

• Always unplug the trimmer before replacing the line.
• Refer to the spool cover for instructions on how to open the spool housing.
• Remove the empty spool.
• Install a new WORX replacement spool (model WA0010 or equivalent 0.065" diameter line). Ensure the line is properly threaded through the eyelets.
• Snap the spool cover back into place securely.

Cleaning and Storage

• After each use, unplug the tool and clean the exterior with a damp cloth. Do not use strong detergents or solvents.
• Remove any grass clippings or debris from the guard and cutting head.
• Store the trimmer in a dry, secure location, out of reach of children.
• Avoid storing in direct sunlight or extreme temperatures.

Troubleshooting

If you encounter issues with your WORX WG119, consult the table below for common problems and solutions.

If the problem persists after attempting these solutions, contact WORX customer support.

Specifications

Warranty and Support

WORX provides a limited warranty for its products. For the WG119 Electric String Trimmer & Edger:

• Tool Warranty: 3 Years Limited Warranty.
• Battery Warranty: 2 Years Limited Warranty (Note: This model is corded electric and does not use a battery, but this is general WORX warranty information).

Figure 3: WORX Limited Warranty Details

For warranty claims, technical support, or to purchase replacement parts, please visit the official WORX website or contact their customer service department. Keep your proof of purchase for warranty validation.

You can find more information and contact details on the WORX Store on Amazon.