1. Product Overview
The Orac Decor C220 Purotouch High Density Polyurethane Crown Moulding is designed to enhance the aesthetic appeal of both interior and exterior spaces. Manufactured from Purotouch, a high-density polyurethane foam, this moulding offers pronounced detailing and crisp, clean lines. It is lightweight, durable, and resistant to moisture, making it suitable for various environments. The C220 moulding can be used independently or in conjunction with other Orac Decor mouldings to create a cohesive design.
Image: Orac Decor Cornice Mouldings showcasing their application in different room settings.
Image: A visual comparison illustrating the benefits of Orac Decor's one-piece moulding construction over traditional multi-piece build-up methods.
2. Setup and Preparation
2.1 Surface Preparation
Before installation, ensure the surface is properly prepared to guarantee optimal adhesion and a lasting finish. The surface must be:
- Clean: Free from dust, dirt, and debris.
- Dry: Completely dry before applying any adhesives.
- Smooth: Any uneven areas should be sanded or filled.
- Grease-free: Wipe down surfaces to remove any oily residues.
2.2 Atmospheric Conditions
For best results, allow the moulding to acclimatize to the room's atmosphere for at least 24 hours prior to installation. Maintain the following conditions:
- Temperature: Between 10°C and 35°C (50°F and 95°F).
- Humidity: Minimum 40% and maximum 70%.
Video: This video demonstrates the essential surface and atmospheric preparation steps required before installing Orac Decor mouldings, ensuring proper adhesion and finish.
3. Installation
3.1 Recommended Adhesives
Orac Decor recommends specific adhesives for different applications to ensure a secure and lasting installation:
- DecoFix Pro (FDP-500): A strong bond adhesive for general installation of mouldings to walls and ceilings. Can also be used as a filler.
- DecoFix Hydro: For installations in damp or humid environments, such as bathrooms or outdoors.
- DecoFix Extra (FX200): A transparent adhesive specifically designed for seaming joints between mouldings, providing a tight bond and seamless look.
Image: Overview of Orac Decor's adhesive range, including DecoFix Pro, DecoFix Extra, and DecoFix Hydro, with their recommended uses.
Image: Tubes of DecoFix Pro and DecoFix Extra adhesives, essential for secure moulding installation and seamless joints.
3.2 Installation Steps for Joints
Follow these steps for creating seamless joints between moulding pieces:
- Apply Adhesive: Apply DecoFix Extra (FX200) to the joint surfaces of the moulding pieces.
- Join Pieces: Press the moulding pieces together firmly, ensuring a tight fit.
- Remove Excess (Initial): Immediately remove any excess adhesive that squeezes out from the joint using a palette knife. This should be done within 1 hour of application.
- Clean Residue: Clean any remaining adhesive residue with a synthetic thinner or acetone.
- Remove Excess (Final): After 2 to 3 hours, remove any further excess adhesive that may have appeared.
- Sand Joints: Lightly sand the dried joints to achieve a smooth, uniform surface.
- Paint: The moulding is now ready for painting.
Image: Orac Decor C220 Crown Moulding expertly installed in a room corner, showcasing its detailed design and seamless integration.
4. Maintenance
Orac Decor Purotouch mouldings are designed for low maintenance. Due to their moisture-resistant properties, they can be easily cleaned with a damp cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals that could damage the finish. Regular dusting will help maintain their appearance.
5. Specifications
| Feature | Detail |
|---|---|
| Model Number | C220 |
| Material | Purotouch High-Density Polyurethane Foam |
| Dimensions (L x W x H) | 78 x 5.38 x 3 inches |
| Item Weight | 24 pounds (for 15-pack) |
| Finish | Primed White |
| Special Features | Lightweight, Moisture Resistant |
Image: Detailed technical diagram illustrating the profile and dimensions of the Orac Decor C220 moulding.
6. Troubleshooting
6.1 Gaps in Joints
If gaps appear in the joints after initial application, it may be due to insufficient adhesive or improper curing. Ensure adequate adhesive is applied and the pieces are held firmly together during the initial setting time. Reapply DecoFix Extra if necessary and allow proper curing.
6.2 Moulding Not Adhering
If the moulding is not adhering properly to the wall or ceiling, verify that the surface preparation steps (clean, dry, smooth, grease-free) were followed correctly. Ensure the correct adhesive (DecoFix Pro or Hydro) is used for the environment and that sufficient pressure is applied during installation. Allow the recommended curing time before further handling.
7. Warranty and Support
For specific warranty information or technical support regarding your Orac Decor C220 Purotouch Crown Moulding, please contact the manufacturer, Orac Decor, or the authorized seller, Architectural Products by Outwater. You can visit the Orac Decor Store on Amazon for more product information and contact details.
