Advance Tabco TKMS-3010 Commercial Work Table User Manual

1. Introduction

This user manual provides essential information for the safe and efficient use, installation, and maintenance of your Advance Tabco TKMS-3010 Commercial Work Table. Please read this manual thoroughly before operating the unit and retain it for future reference. This work table is designed for commercial use, offering a durable and hygienic workspace.

Key features include:

• Dimensions: 30 inches (Depth) x 120 inches (Width) x 40.5 inches (Height)
• Construction: 16 gauge stainless steel top
• Base: Open base with 1 5/8 inch diameter stainless steel legs and adjustable bullet feet
• Backsplash: 5 inch high backsplash
• Edges: Rolled front edge and square side edges
• Welding: Fully TIG welded joints with sound deadened top
• Certification: NSF certified

2. Safety Instructions

Always adhere to the following safety guidelines to prevent injury or damage to the equipment.

• Heavy Object: The work table weighs approximately 249 pounds. Always use appropriate lifting techniques and equipment, and ensure sufficient personnel are present when moving or positioning the table.
• Stable Surface: Ensure the table is placed on a level, stable, and structurally sound surface capable of supporting its weight and any items placed upon it.
• Leg Adjustment: Properly adjust the bullet feet to ensure the table is level and stable before use. Uneven tables can be a tipping hazard.
• Edge Awareness: Be mindful of the rolled front edge and square side edges to prevent accidental bumps or scrapes.
• Cleaning: Follow maintenance instructions for cleaning to avoid damage to the stainless steel finish and ensure a hygienic work surface.
• Intended Use: This table is designed for commercial work surfaces. Do not use it for purposes other than its intended design.

3. Setup and Assembly

The Advance Tabco TKMS-3010 work table is designed for straightforward assembly. Follow these steps carefully:

1. Unpacking: Carefully remove all components from the packaging. Inspect for any shipping damage. Report any damage to your supplier immediately.
2. Component Check: Verify that all parts are present:
   • Stainless steel top with 5" backsplash
   • Stainless steel legs (4)
   • Adjustable bullet feet (4)
   • Aluminum die-cast leg-to-shelf clamps (if applicable for undershelf, though this model is open base, clamps are for leg stability)
   • Hardware (if any, for leg attachment)
3. Leg Attachment:

   Position the stainless steel top upside down on a protected, non-abrasive surface. Insert the stainless steel legs into the designated sockets on the underside of the table top. Ensure the legs are fully seated and secured. The welded gussets support the hat sections, providing robust leg attachment points.

   

   An image showing the Advance Tabco TKMS-3010 stainless steel commercial work table with its open base and 5-inch backsplash. This image illustrates the overall structure including the legs.
4. Adjusting Bullet Feet: Once the table is upright, adjust the bullet feet at the bottom of each leg. Rotate them clockwise or counter-clockwise until the table is perfectly level and stable on the floor. This is crucial for safe operation and preventing wobbling.
5. Final Inspection: Before use, double-check all connections and ensure the table is stable and secure.

4. Operating Instructions

The Advance Tabco TKMS-3010 work table is designed for general commercial use. No specific operational procedures are required beyond proper placement and maintenance.

• Work Surface: Utilize the 16 gauge stainless steel top as a durable and hygienic surface for food preparation, equipment placement, or general workspace needs.
• Backsplash: The 5-inch backsplash helps contain spills and protects the wall behind the table from splashes and debris.
• Weight Capacity: While robust, avoid placing excessive or concentrated loads that exceed the table's structural integrity. Distribute weight evenly across the surface.
• Environment: Ensure the operating environment is suitable for stainless steel equipment, avoiding highly corrosive chemicals or extreme temperatures that could compromise the material.

5. Maintenance and Cleaning

Regular cleaning and maintenance will prolong the life and maintain the appearance of your stainless steel work table.

• Daily Cleaning: Wipe down the stainless steel surface daily with a soft cloth or sponge and a mild detergent solution. Rinse thoroughly with clean water and dry immediately to prevent water spots.
• Stubborn Stains: For more stubborn stains, use a non-abrasive stainless steel cleaner. Always rub in the direction of the grain to avoid scratching.
• Avoid: Do not use abrasive cleaners, steel wool, or harsh chemicals (e.g., bleach, strong acids) as these can damage the stainless steel finish.
• Legs and Feet: Periodically check the legs and adjustable bullet feet for cleanliness and ensure they remain securely tightened and level.
• Sound Deadening: The sound deadened top requires no special maintenance, but ensure no liquids or debris accumulate in crevices.

6. Troubleshooting

This section addresses common issues you might encounter with your work table.

7. Specifications

Detailed specifications for the Advance Tabco TKMS-3010 Commercial Work Table:

8. Warranty and Support

For warranty information and customer support regarding your Advance Tabco TKMS-3010 Commercial Work Table, please refer to the documentation provided at the time of purchase or contact Advance Tabco directly.

Manufacturer Contact:

Advance Tabco
Website: www.advancetabco.com
Please visit their official website for the most current contact information, service manuals, and warranty details.