1. Introduction
This manual provides essential instructions for the safe and efficient use of your Eurobric2000 RSL366T Remote Control and RSL366R Radio-Controlled Socket Set. Please read this manual thoroughly before installation and operation, and retain it for future reference.
The Eurobric2000 radio-controlled socket set allows you to remotely switch on and off electrical appliances connected to the sockets using the included remote control. This product is designed for indoor use only.
2. Package Contents
- 1 x Eurobric2000 RSL366T Remote Control
- Multiple Eurobric2000 RSL366R Radio-Controlled Sockets (quantity may vary by package)
- 1 x 12V Battery for Remote Control (pre-installed or included separately)
Image 1: Overview of the Eurobric2000 RSL366T remote control and three RSL366R radio-controlled sockets. The remote is white with four pairs of ON/OFF buttons, and the sockets are white, round, with a top housing containing an indicator light.
3. Setup and Installation
3.1. Remote Control Battery Installation
- Locate the battery compartment on the back of the RSL366T remote control.
- Open the battery compartment cover.
- Insert the 12V battery, ensuring correct polarity (+ and -).
- Close the battery compartment cover securely.
Image 2: A close-up view of the Eurobric2000 RSL366T remote control, showing its white casing, red indicator light, and four pairs of black ON/OFF buttons labeled 1 through 4.
3.2. Pairing Sockets with Remote Control
Each RSL366R radio-controlled socket needs to be paired with a specific channel on the RSL366T remote control. The remote control typically features four channels (1-4), allowing you to control up to four individual sockets or groups of sockets.
- Plug an RSL366R socket into a standard wall outlet. The indicator light on the socket may flash or illuminate briefly.
- Within a few seconds of plugging in the socket, press the "ON" button for your desired channel (e.g., "ON 1") on the RSL366T remote control.
- The socket's indicator light should confirm successful pairing (e.g., by flashing or staying solid).
- Repeat this process for all other RSL366R sockets, assigning each to a unique channel (1-4) or grouping them as desired.
- To test, press the "ON" and "OFF" buttons for the assigned channel on the remote. The socket should respond accordingly.
Important: Ensure the socket is within range of the remote control during pairing and operation. Avoid placing sockets near large metal objects or other sources of radio interference.
Image 3: A close-up view of a single Eurobric2000 RSL366R radio-controlled socket. It is white, round, with a standard European type F socket and a small black indicator light on its upper housing.
4. Operating Instructions
- Plug the appliance you wish to control into the RSL366R radio-controlled socket.
- Ensure the appliance's power switch is in the "ON" position (if applicable).
- Use the RSL366T remote control to switch the socket, and thus the connected appliance, ON or OFF.
- Press the "ON" button for the assigned channel to turn the appliance ON.
- Press the "OFF" button for the assigned channel to turn the appliance OFF.
- The indicator light on the RSL366R socket will typically illuminate when the socket is ON and turn off when it is OFF.
Caution: Do not exceed the maximum load of 1000W per socket. This product is for indoor use only and should not be exposed to moisture or extreme temperatures.
5. Maintenance
5.1. Cleaning
- Wipe the devices with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals.
- Ensure the devices are unplugged before cleaning.
5.2. Battery Replacement (Remote Control)
If the remote control's range decreases or it becomes unresponsive, the 12V battery may need replacement. Follow the steps in Section 3.1 to replace the battery.
Warning: Dispose of used batteries responsibly according to local regulations.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Socket does not respond to remote. |
|
|
| Appliance does not turn on when socket is ON. |
|
|
| Indicator light on socket does not work. |
|
|
7. Specifications
- Brand: Eurobric2000
- Model: RSL366T (Remote Control) & RSL366R (Radio-Controlled Socket)
- Maximum Load per Socket: 1000 Watts
- Remote Control Power: 1 x 12V Alkaline Battery (included)
- Usage Environment: Indoor use only
- Package Dimensions: Approximately 24 x 20.1 x 8.5 cm
- Package Weight: Approximately 390 grams
- ASIN: B00FIMWB6Q
8. Warranty and Support
Specific warranty details for the Eurobric2000 RSL366T & RSL366R set are not provided in this manual. For warranty information, please refer to the documentation included with your purchase or contact the retailer or manufacturer directly.
For technical support or further assistance, please contact Eurobric2000 customer service through their official website or the contact information provided at the point of purchase.